Products catalog

  • 1-gang switch 10AX | 230V | IP20 | flush-mounted | ceramic | retro style | white

    Code: SM-01-44

    1-gang switch designed for controlling lighting or other suitable electrical circuits in indoor premises. The white ceramic body gives the switch a distinctive and aesthetic appearance, making it ideal for retro, classic, Scandinavian, rustic or luxury interiors.

    Thanks to flush-mounted installation, the switch is neatly recessed into the wall, making it suitable for residential premises, hotels, cafés, homesteads, restored buildings or interiors where not only technical features but also design are important. 

  • Technical specifications

    Product type: flush-mounted switch
    Switch type: 1 lever
    Purpose: for controlling lighting or other suitable electrical circuits
    Installation method: flush-mounted
    Style: retro / classic / vintage
    Material: ceramic
    Rated current: 10AX
    Rated voltage: 230 V
    Protection degree: IP20
    Diameter: 60 mm
    Height: 34 mm
    Colour: white
    Set contents: without frame
    Place of use: indoor areas

    Functions

    Control of one electrical circuit - the switch has one lever, therefore it is designed to switch one lighting zone or one electrical circuit on and off
    Lighting control - suitable for switching ceiling lights, wall lights, luminaires or decorative lighting on and off
    Flush-mounted installation - installed into a flush-mounted box, so the installation looks neat and the switch blends nicely into the wall surface
    Retro design accent - the white ceramic body and lever control give the interior a classic, authentic appearance
    Suitable for a 230 V electrical network - designed for standard indoor electrical installations used in residential and commercial buildings

    Use

    For household users: This switch is suitable for houses, apartments, homesteads, cottages or holiday homes where a classic or retro interior style is desired. It can be used in the living room, bedroom, corridor, kitchen or other dry indoor areas.

    For interior designers: A ceramic retro switch is a good choice for interiors where detail, aesthetics and material quality are important. White ceramic matches wood, plastered walls, aged surfaces, classic furniture and vintage luminaires.

    For electricians: The switch is intended for flush-mounted installation into standard electrical installation boxes. Before installation, it is necessary to assess the circuit load, wiring connection diagram and select a suitable frame, as the product is supplied without a frame.

    For designers or engineers: Suitable for electrical installation projects in residential, commercial or representative premises where aesthetic, classic-design switches with 230 V network compatibility and IP20 protection class are required.

    Advantages

    Retro-style design – suitable for classic, vintage and distinctive interiors
    Ceramic construction – aesthetic, durable and high-quality-looking material
    Flush-mounted installation – neat and aesthetic wall installation
    White colour – easy to match with various interior colours
    10AX rated current – suitable for lighting circuits

    Disadvantages

    Not suitable for outdoor conditions – IP20 protection degree is not intended for damp, dusty or outdoor environments
    Supplied without frame – the frame must be selected and purchased separately

    Is this switch suitable for LED lighting?

    Yes, the switch can be used for LED lighting circuits if the total load does not exceed the technical parameters of the product. It is always recommended to evaluate the characteristics of the specific luminaires and power supplies.

    Is the switch sold with a frame?

    No, this model is supplied without a frame. The frame must be selected separately according to compatibility and the desired design.

    What does the 10AX marking mean?

    10AX means that the switch is intended for lighting circuits and can be used with certain inductive or lighting loads according to the manufacturer’s specified parameters. In practice, this is most commonly relevant for lighting control.

    Where is the best place to use this retro switch?

    The switch is suitable for living rooms, bedrooms, corridors, homesteads, hotels, cafés, restaurants and other premises where a classic or retro interior style is desired. 

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Copper installation cable NYM-J | 3×2.5 mm² | 300/500 V | white | 1 m | Lietkabelis KH05VV-U 3G2.5
    Code: 92032501 (1m)

    NYM-J 3×2.5 mm² (KH05VV-U 3G2.5) – AB Lietkabelis copper installation cable with solid class 1 conductors, PVC insulation and a white PVC sheath, 300/500 V. For fixed installation inside buildings: in walls, under plaster, in conduits and trunking. Sold by the metre.

    3 cores (L, N, PE) for single-phase 230 V installation: lighting, socket and dedicated appliance circuits.

    Price 1.42 € VAT incl.
    ( 1.17 € VAT excl. )
    Braided cable | fabric covered | 3x1.5 | copper | flexible | white | retro style | vintage
    Code: pintas 3x1,5 b
    Braided cable, covered with fabric, designed for retro and vintage-style electrical installations, where wires remain visible and become part of the interior. It is a 3x1.5 mm² copper, flexible, multi-strand cable with PVC and textile sheathing, suitable for use in lighting, switch, electrical socket, and decorative surface-mounted installation solutions. 
    Price 2.25 € VAT incl.
    ( 1.86 € VAT excl. )
    Terminal block | electrical wire connector | universal | 3x0.2-4mm² | for all types of wires | WAGO | 221-413 | 4050821808442
    Code: WAGO 221-413

    Universal 3-wire terminal block, designed for fast, safe and neat connection of electrical wires. This connector is suitable for solid, stranded and flexible wires, therefore it is widely used both in household electrical installations and in professional installation work.

    The convenient lever system allows the wire to be connected very quickly: lift the lever, insert the conductor and lock it by lowering the lever. The connector has a transparent housing, making it easier to visually check whether the wire has been inserted correctly. 

    Price 0.33 € VAT incl.
    ( 0.27 € VAT excl. )
  • Subscribtion to new arrivals

    privacy policy

    Information