Products catalog

Metal | steel surface-mounted electrical distribution boxes | enclosures

  • Steel surface-mounted distribution boards for modular circuit breakers, RCDs and other DIN-rail equipment – from 10 to 72 modules. Choose by module count and the IP rating your environment requires.

    IP30 | IP31 →IP44 →IP54 →

  • Steel surface-mounted distribution boards – how to choose

    A steel surface-mounted enclosure is fixed to the wall when the equipment cannot or should not be recessed into it: in production areas, garages, basements, technical rooms and outdoors. A steel housing is sturdier than plastic, more impact-resistant and copes better with higher temperatures inside the enclosure.

    Quick selection by environment

    Environment Recommended IP Where to look
    Dry indoor room, apartment, office IP30 / IP31 Enclosures IP30 | IP31
    Basement, warehouse, workshop IP44 Enclosures IP44
    Production area, garage, under a canopy IP54 Enclosures IP54
    Outdoors, washed or damp rooms IP65 / IP66 Listed in this group: sealed enclosures, 10–72 modules
    Need a mounting plate for contactors, PLCs, drives Depending on environment Steel enclosures with mounting plate

    What the IP rating means

    IP Protection Suitable for
    IP30 / IP31 Against objects > 2.5 mm; IP31 – also against vertically falling drops Dry indoor rooms: apartments, offices, stairwells
    IP44 Against objects > 1 mm and splashing water Basements, warehouses, workshops
    IP54 Dust-protected, splash-resistant Production areas, garages, under a canopy
    IP65 Fully dust-tight, resistant to water jets Outdoors, washed rooms, agriculture
    IP66 Fully dust-tight, resistant to powerful water jets Outdoor sites, car washes, ports

    ⚠ What to check before buying

    What to check Why it matters
    Module count or mounting plate size Equipment must fit with a 20–30 % reserve for future expansion and cable routing
    Depth Contactors, frequency drives and power supplies often need ≥ 200 mm
    IP rating At least what the environment requires; the actual IP also depends on the cable entries
    Door and lock Solid or with a window (for meters); a lock when the enclosure is accessible to unauthorised persons
    Cable entries Knock-outs, sealing plates or PG glands – see the sealing products
    ℹ Module – an 18 mm wide space on a DIN rail. A single-pole circuit breaker takes 1 module, a three-pole one 3, a two-pole RCD 2, a four-pole RCD 4. For sealing cable entries, see the sealing products group.

    ✗ Most common mistakes

    Mistake Consequence
    Enclosure chosen “exactly” with no reserve No room to add circuits, equipment overheats, hard to service
    IP31–IP44 enclosure installed outdoors Moisture and condensation – corrosion, nuisance RCD tripping
    IP65 enclosure with leaky cable entries Actual IP is much lower than declared
    Door and housing not earthed ⚡ If insulation fails, the housing can become live
    ⚡ Safety. The housing and door of a metal enclosure are connected to protective earth (PE). Enclosures are installed and equipment is connected by a qualified electrician with the power disconnected.

    Frequently asked questions

    How many modules does a house need?

    A detached house usually needs 24–36 modules, but calculate by the number of circuits and leave a 20–30 % reserve.

    Can an IP65 enclosure be installed outdoors?

    Yes, if the cable entries are sealed and the enclosure is protected from direct sunlight and condensation.

    How is a steel enclosure better than a plastic one?

    Greater mechanical strength and heat resistance, and the housing can be earthed. Plastic is lighter and does not corrode.

    Send us your circuit list or single-line diagram – we will select an enclosure of the right size and the equipment. Contact us.

    Read more
    Steel hermetic distribution enclosure | 20 modules (2×10) | 400×300 mm | surface-mounted | with inner panel and DIN rails | lockable | IP66 | 4772124002814
    Code: IP66-20

    Surface-mounted steel enclosure for 20 modular devices (2 rows of 10) with a metal inner panel and two 35 mm DIN rails. Gasketed lockable door, IP66 ingress protection and IK08 impact resistance – suitable for power distribution outdoors, in industry and in damp rooms.

    Price 86.39 € VAT incl.
    ( 71.40 € VAT excl. )
    Electrical distribution enclosure | 10 modules | 300×250×125 mm | IP65 | IK08 | steel, surface-mounted | ES-760102
    Code: ES-760102

    ES-760102 is a reinforced metal electrical distribution enclosure for 10 modules of DIN equipment, mounted by surface (wall) mounting. The enclosure is designed for mounting modular circuit breakers, MCCB protective devices, earth and neutral busbars in industrial, commercial and residential electrical installations, as well as outdoors. The 1.0 mm thick steel body with stiffening ribs and IP65-rated sealing keeps the equipment dry and protected even against splashing water and dust.

    Price 85.09 € VAT incl.
    ( 70.33 € VAT excl. )
    Electrical distribution | modular enclosure | box | cabinet | 72 modules | 450x1050x150mm | hermetic | surface mounting | steel | IP65
    Code: ES-760190

    Metal electrical distribution board – a reinforced surface-mounted distribution enclosure designed for safe installation of modular circuit breakers, MCCB protections, DIN rail equipment, grounding bars, and neutral bars in industrial, commercial, and residential electrical installations.

    The reinforced steel housing with stiffening ribs, hermetic cable entry plates, cast PU sealing gasket in the door, and IP65 protection class ensure long-term protection against dust, moisture, splashes, and mechanical impact.

    The door can be mounted on either the left or right side, while the 120° opening angle provides convenient access during installation and maintenance. 

    Price 356.83 € VAT incl.
    ( 294.90 € VAT excl. )
    Electrical distribution | modular enclosure | box | cabinet | 60 modules | 400x1050x150mm | hermetic | surface mounting | steel | IP65
    Code: ES-760188

    Metal electrical distribution board – a reinforced surface-mounted distribution enclosure designed for safe installation of modular circuit breakers, MCCB protections, DIN rail equipment, grounding bars, and neutral bars in industrial, commercial, and residential electrical installations.

    The reinforced steel housing with stiffening ribs, hermetic cable entry plates, cast PU sealing gasket in the door, and IP65 protection class ensure long-term protection against dust, moisture, splashes, and mechanical impact.

    The door can be mounted on either the left or right side, while the 120° opening angle provides convenient access during installation and maintenance. 

    Price 335.57 € VAT incl.
    ( 277.33 € VAT excl. )
    Electrical distribution | modular enclosure | box | cabinet | 54 modules | 450x900x150mm | hermetic | surface mounting | steel | IP65
    Code: ES-760186

    Metal electrical distribution board – a reinforced surface-mounted distribution enclosure designed for safe installation of modular circuit breakers, MCCB protections, DIN rail equipment, grounding bars, and neutral bars in industrial, commercial, and residential electrical installations.

    The reinforced steel housing with stiffening ribs, hermetic cable entry plates, cast PU sealing gasket in the door, and IP65 protection class ensure long-term protection against dust, moisture, splashes, and mechanical impact.

    The door can be mounted on either the left or right side, while the 120° opening angle provides convenient access during installation and maintenance. 

    Price 286.71 € VAT incl.
    ( 236.95 € VAT excl. )
    Electrical distribution | modular enclosure | box | cabinet | 45 modules | 400x900x150mm | hermetic | surface mounting | steel | IP65
    Code: ES-760184

    Metal electrical distribution board – a reinforced surface-mounted distribution enclosure designed for safe installation of modular circuit breakers, MCCB protections, DIN rail equipment, grounding bars, and neutral bars in industrial, commercial, and residential electrical installations.

    The reinforced steel housing with stiffening ribs, hermetic cable entry plates, cast PU sealing gasket in the door, and IP65 protection class ensure long-term protection against dust, moisture, splashes, and mechanical impact.

    The door can be mounted on either the left or right side, while the 120° opening angle provides convenient access during installation and maintenance. 

    Price 265.33 € VAT incl.
    ( 219.28 € VAT excl. )
    Electrical distribution | modular enclosure | box | cabinet | 36 modules | 450x750x150mm | hermetic | surface mounting | steel | IP65
    Code: ES-760182

    Metal electrical distribution board – a reinforced surface-mounted distribution enclosure designed for safe installation of modular circuit breakers, MCCB protections, DIN rail equipment, grounding bars, and neutral bars in industrial, commercial, and residential electrical installations.

    The reinforced steel housing with stiffening ribs, hermetic cable entry plates, cast PU sealing gasket in the door, and IP65 protection class ensure long-term protection against dust, moisture, splashes, and mechanical impact.

    The door can be mounted on either the left or right side, while the 120° opening angle provides convenient access during installation and maintenance. 

    Price 288.77 € VAT incl.
    ( 238.65 € VAT excl. )
    Electrical distribution | modular enclosure | box | cabinet | 30 modules | 400x750x150mm | hermetic | surface mounting | steel | IP65
    Code: ES-760180

    Metal electrical distribution board – a reinforced surface-mounted distribution enclosure designed for safe installation of modular circuit breakers, MCCB protections, DIN rail equipment, grounding bars, and neutral bars in industrial, commercial, and residential electrical installations.

    The reinforced steel housing with stiffening ribs, hermetic cable entry plates, cast PU sealing gasket in the door, and IP65 protection class ensure long-term protection against dust, moisture, splashes, and mechanical impact.

    The door can be mounted on either the left or right side, while the 120° opening angle provides convenient access during installation and maintenance. 

    Price 239.37 € VAT incl.
    ( 197.83 € VAT excl. )
    Electrical distribution | modular enclosure | box | cabinet | 72 modules | 450x750x125mm | hermetic | surface mounting | steel | IP65
    Code: ES-760166

    Metal electrical distribution board – a reinforced surface-mounted distribution enclosure designed for safe installation of modular circuit breakers, MCCB protections, DIN rail equipment, grounding bars, and neutral bars in industrial, commercial, and residential electrical installations.

    The reinforced steel housing with stiffening ribs, hermetic cable entry plates, cast PU sealing gasket in the door, and IP65 protection class ensure long-term protection against dust, moisture, splashes, and mechanical impact.

    The door can be mounted on either the left or right side, while the 120° opening angle provides convenient access during installation and maintenance. 

    Price 236.31 € VAT incl.
    ( 195.30 € VAT excl. )
    Electrical distribution | modular enclosure | box | cabinet | 60 modules | 400x750x125mm | hermetic | surface mounting | steel | IP65
    Code: ES-760164

    Metal electrical distribution board – a reinforced surface-mounted distribution enclosure designed for safe installation of modular circuit breakers, MCCB protections, DIN rail equipment, grounding bars, and neutral bars in industrial, commercial, and residential electrical installations.

    The reinforced steel housing with stiffening ribs, hermetic cable entry plates, cast PU sealing gasket in the door, and IP65 protection class ensure long-term protection against dust, moisture, splashes, and mechanical impact.

    The door can be mounted on either the left or right side, while the 120° opening angle provides convenient access during installation and maintenance. 

    Price 200.78 € VAT incl.
    ( 165.93 € VAT excl. )
    Electrical distribution | modular enclosure | box | cabinet | 54 modules | 450x600x125mm | hermetic | surface mounting | steel | IP65
    Code: ES-760146

    Metal electrical distribution board – a reinforced surface-mounted distribution enclosure designed for safe installation of modular circuit breakers, MCCB protections, DIN rail equipment, grounding bars, and neutral bars in industrial, commercial, and residential electrical installations.

    The reinforced steel housing with stiffening ribs, hermetic cable entry plates, cast PU sealing gasket in the door, and IP65 protection class ensure long-term protection against dust, moisture, splashes, and mechanical impact.

    The door can be mounted on either the left or right side, while the 120° opening angle provides convenient access during installation and maintenance. 

    Price 200.78 € VAT incl.
    ( 165.93 € VAT excl. )
    Electrical distribution | modular enclosure | box | cabinet | 45 modules | 400x600x125mm | hermetic | surface mounting | steel | IP65
    Code: ES-760144

    Metal electrical distribution board – a reinforced surface-mounted distribution enclosure designed for safe installation of modular circuit breakers, MCCB protections, DIN rail equipment, grounding bars, and neutral bars in industrial, commercial, and residential electrical installations.

    The reinforced steel housing with stiffening ribs, hermetic cable entry plates, cast PU sealing gasket in the door, and IP65 protection class ensure long-term protection against dust, moisture, splashes, and mechanical impact.

    The door can be mounted on either the left or right side, while the 120° opening angle provides convenient access during installation and maintenance. 

    Price 187.10 € VAT incl.
    ( 154.63 € VAT excl. )
    Electrical distribution | modular enclosure | box | cabinet | 36 modules | 450x400x125mm | hermetic | surface mounting | steel | IP65
    Code: ES-760126

    Metal electrical distribution board – a reinforced surface-mounted distribution enclosure designed for safe installation of modular circuit breakers, MCCB protections, DIN rail equipment, grounding bars, and neutral bars in industrial, commercial, and residential electrical installations.

    The reinforced steel housing with stiffening ribs, hermetic cable entry plates, cast PU sealing gasket in the door, and IP65 protection class ensure long-term protection against dust, moisture, splashes, and mechanical impact.

    The door can be mounted on either the left or right side, while the 120° opening angle provides convenient access during installation and maintenance. 

    Price 139.07 € VAT incl.
    ( 114.93 € VAT excl. )
    Electrical distribution | modular enclosure | box | cabinet | 30 modules | 400x400x125mm | hermetic | surface mounting | steel | IP65
    Code: ES-760124

    Metal electrical distribution board – a reinforced surface-mounted distribution enclosure designed for safe installation of modular circuit breakers, MCCB protections, DIN rail equipment, grounding bars, and neutral bars in industrial, commercial, and residential electrical installations.

    The reinforced steel housing with stiffening ribs, hermetic cable entry plates, cast PU sealing gasket in the door, and IP65 protection class ensure long-term protection against dust, moisture, splashes, and mechanical impact.

    The door can be mounted on either the left or right side, while the 120° opening angle provides convenient access during installation and maintenance. 

    Price 125.96 € VAT incl.
    ( 104.10 € VAT excl. )
    Electrical distribution | modular enclosure | box | cabinet | 18 modules | 450x250x125mm | hermetic | surface mounting | steel | IP65
    Code: ES-760105

    Metal electrical distribution board – a reinforced surface-mounted distribution enclosure designed for safe installation of modular circuit breakers, MCCB protections, DIN rail equipment, grounding bars, and neutral bars in industrial, commercial, and residential electrical installations.

    The reinforced steel housing with stiffening ribs, hermetic cable entry plates, cast PU sealing gasket in the door, and IP65 protection class ensure long-term protection against dust, moisture, splashes, and mechanical impact.

    The door can be mounted on either the left or right side, while the 120° opening angle provides convenient access during installation and maintenance. 

    Price 101.40 € VAT incl.
    ( 83.80 € VAT excl. )
    Electrical distribution | modular enclosure | box | cabinet | 15 modules | 400x250x125mm | hermetic | surface mounting | steel | IP65
    Code: ES-760104

    Metal electrical distribution board – a reinforced surface-mounted distribution enclosure designed for safe installation of modular circuit breakers, MCCB protections, DIN rail equipment, grounding bars, and neutral bars in industrial, commercial, and residential electrical installations.

    The reinforced steel housing with stiffening ribs, hermetic cable entry plates, cast PU sealing gasket in the door, and IP65 protection class ensure long-term protection against dust, moisture, splashes, and mechanical impact.

    The door can be mounted on either the left or right side, while the 120° opening angle provides convenient access during installation and maintenance. 

    Price 95.05 € VAT incl.
    ( 78.55 € VAT excl. )
    Electrical distribution | modular enclosure | box | cabinet | 12 modules | 350x250x125mm | hermetic | surface mounting | steel | IP65
    Code: ES-760103

    Metal electrical distribution board – a reinforced surface-mounted distribution enclosure designed for safe installation of modular circuit breakers, MCCB protections, DIN rail equipment, grounding bars, and neutral bars in industrial, commercial, and residential electrical installations.

    The reinforced steel housing with stiffening ribs, hermetic cable entry plates, cast PU sealing gasket in the door, and IP65 protection class ensure long-term protection against dust, moisture, splashes, and mechanical impact.

    The door can be mounted on either the left or right side, while the 120° opening angle provides convenient access during installation and maintenance. 

    Price 88.78 € VAT incl.
    ( 73.38 € VAT excl. )
    Electrical distribution board | box | 36 modules | 320 x 520 x 150 mm | surface-mounted | steel | IP65 | for indoor installations
    Code: RH36DP

    Electrical distribution board designed for low-voltage (LV) indoor electrical installations where increased tightness, reliability, and flexible mounting of modular devices are required. Thanks to the IP65 protection class, robust steel enclosure, and adjustable DIN rail depth, this board is perfectly suited for residential, commercial, and industrial facilities. The board is designed for 3 rows of 12 modules (36 modules total), allowing neat and safe installation of circuit breakers, RCDs, contactors, relays, and other modular equipment. 

    Price 176.90 € VAT incl.
    ( 146.20 € VAT excl. )