Products catalog

Home/Product Catalog/Electrical distribution and installation/Electrical installation components/Vintage | Retro Style Electrical Installation Components/Switches | surface-mounted | ceramic | retro style
  •   2-gang switch 10AX | 230V | IP20 | ceramic | surface-mounted | retro style | black
      2-gang switch 10AX | 230V | IP20 | ceramic | surface-mounted | retro style | black 1

    2-gang switch 10AX | 230V | IP20 | ceramic | surface-mounted | retro style | black

    Code: SM-01-22
    Inquire about this item
    Price 22.70 € VAT incl.
    ( 18.76 € VAT excl. )
    Want another price? Suggest yours!
    2-toggle ceramic switch, designed for retro, vintage, or classic-style electrical installations, where the switch is mounted in a visible location and becomes an interior detail. This is a surface-mounted, black ceramic switch for 230 V circuits, featuring a 10AX rated current, IP20 protection rating, and a double-toggle switch design. 
  • Product description

    Retro-style ceramic switch with 2 toggles – 10AX, 230V, IP20, surface-mounted, black

    A 2-toggle ceramic switch designed for retro, vintage, or classic-style electrical installations, where the switch is mounted in a visible location and becomes an interior design detail. This is a surface-mounted, black ceramic switch for 230 V circuits, featuring a 10AX rated current, IP20 protection rating, and a double-pole switch design.

    Main idea:
    This switch is intended for retro-style surface-mounted electrical installations where both functional control and an aesthetic, decorative solution are required. The black ceramic body and two toggles provide a distinct classic look, while the double-pole design allows for the control of two circuit lines according to the specific wiring diagram.
    Type
    2-toggle switch
    Current
    10AX
    Body
    Ceramic
    Protection
    IP20

    Operating principle

    The 2-toggle switch is used for manual control of an electrical circuit. Each toggle can perform a separate control function based on the specific switch contact diagram. The double-pole switch type allows for simultaneous control of two circuit lines, so it is necessary to check the exact wiring diagram before installation.

    Surface-mounted installation means the switch is fixed directly onto a wall or other surface. It is particularly suitable for open retro installations where braided textile cables, ceramic insulators, surface junction boxes, and other decorative electrical installation elements are used.

    What makes the 2-toggle ceramic switch stand out?
    The 2-toggle switch provides a distinctive retro look and allows for comfortable control of electrical circuits using mechanical toggles. The ceramic body visually matches retro installation accessories, and the black color is suitable for contrasting, classic, or industrial-style interiors.

    Technical parameters

    Product type 2-toggle switch
    Switch type Surface-mounted, retro style
    Number of toggles 2 toggles
    Switch design Double-pole
    Rated current 10AX
    Rated voltage 230 V
    Protection rating IP20
    Material Ceramic
    Body material Ceramic body
    Color Black
    Dimensions 227 x 85 mm
    Mounting type Surface-mounted
    Style Retro style
    Purpose Manual control of lighting or coordinated 230 V electrical circuits
    Area of use Dry indoor premises, living spaces, farmhouses, wooden homes, retro-style electrical installations

    Where is it used?

    • In retro-style electrical installations – when the switch remains visible and becomes part of the interior.
    • In farmhouses and wooden homes – together with braided textile cables, ceramic insulators, and surface-mounted boxes.
    • In living spaces – for controlling lighting or other coordinated 230 V circuits.
    • In cafes, studios, or decorative interiors – when creating an industrial, retro, or vintage look for the electrical installation.
    • In open installations – when the switch is mounted on a surface and wires are routed visibly.

    Practical installation example

    For instance, the switch is mounted on a wooden or plastered wall in a retro-style room. Braided textile cables can be brought to it and secured with ceramic insulators. The switch toggles are used for manual control of lighting or another coordinated circuit according to the specific wiring diagram.

    The black ceramic body blends well with dark or contrasting interior elements, and the surface-mounted design helps maintain an authentic open-installation look.

    Pros

    • 2-toggle control – expressive and convenient operation of a retro-style switch.
    • Ceramic body – a classic, sturdy, and decorative solution for retro installations.
    • Black color – suitable for contrasting, industrial, and vintage interiors.
    • Double-pole design – allows control of two circuit lines according to a specific diagram.
    • Surface-mounted installation – no need to recess the switch into the wall.
    • 10AX rated current – suitable for most lighting circuits, considering the load.
    • Highly decorative – the switch becomes a visible interior detail.

    Cons / limitations

    • IP20 protection rating – designed for dry indoor premises; not suitable for damp or outdoor locations without additional protection.
    • Ceramic can crack upon impact – protect from mechanical damage.
    • 10AX current limit – it is essential to evaluate the type and power of the controlled load.
    • Surface-mounted is visible – not suitable if a hidden flush-mounted solution is required.
    • Wiring diagram check required – double-pole switch must be connected according to the specific contact diagram.

    Safety and installation notes

    The ceramic switch is an electrical installation component; therefore, before installation, it is necessary to evaluate the contact diagram, the controlled load, cable connection, installation location, and electrical safety requirements.

    • Installation must be performed by a qualified electrician in compliance with applicable electrical safety regulations.
    • Always disconnect electrical power before working and ensure there is no voltage in the circuit.
    • Do not exceed 10AX rated current – the load must be compatible with the switch parameters.
    • IP20 protection means the switch must be used in dry indoor premises.
    • Protect the ceramic body from impacts, as strong mechanical force can damage it.
    • Double-pole switch connection must be performed only according to the specific diagram and purpose.

    Quick selection guide

    Black ceramic 2-toggle switch 10AX 230V IP20 – a suitable choice when you need an expressive retro-style surface-mounted switch for dry indoor rooms. It pairs well with braided textile cables, ceramic insulators, retro sockets, and surface-mounted junction boxes.

    Toggles
    2 toggles
    Current
    10AX
    Protection
    IP20
    Material
    Ceramic
    Suitable when you need to:
    • install a retro-style surface-mounted switch;
    • use a black ceramic body;
    • control 230 V lighting or coordinated electrical circuits;
    • match the switch with braided cables and ceramic insulators;
    • have a decorative 2-toggle control element.
    Check before installation:
    • whether the controlled loads do not exceed 10AX;
    • whether a double-pole switch design is specifically needed;
    • whether the wiring diagram matches the switch contact logic;
    • whether the installation environment is dry and suitable for an IP20 device;
    • whether the switch dimensions (227 x 85 mm) fit the intended location.
    Important reminder:
    This switch is intended for dry indoor premises and 230 V electrical circuits up to 10AX. For damp, outdoor, or dusty locations, you must choose a switch with a higher IP protection rating.

    FAQ – Frequently asked questions

    What is this 2-toggle switch for?
    It is intended for manual control of 230 V lighting or other coordinated electrical circuits in retro-style surface-mounted installations.
    Is this a surface-mounted switch?
    Yes, the switch is surface-mounted and attached to a wall or another suitable surface.
    What is the rated current?
    The rated current of the switch is 10AX.
    What is the protection rating?
    The protection rating is IP20, so it is intended for dry indoor premises.
    What material is the switch made of?
    The switch body is made of ceramic.
    What does double-pole mean?
    Double-pole means that the switch can control two circuit lines according to a specific wiring diagram. Connection must be performed according to the manufacturer's contact diagram.
    Can it be used outdoors?
    No, unless there is additional protection. The IP20 rating means the switch is intended for dry indoor premises. For outdoor or damp locations, you need to choose a switch with a higher IP rating.

    A black ceramic accent for retro electrical installations

    The 2-toggle ceramic switch adds an exceptional retro character to electrical installations and allows for convenient control of 230 V circuits in a classic mechanical way.

    Due to its black ceramic body, surface-mounted design, 10AX rated current, and decorative toggles, this switch is a practical and aesthetic choice for farmhouses, wooden homes, retro interiors, and open vintage installations.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Subscribtion to new arrivals

    privacy policy

    Information