Products catalog

Fuse disconnectors

  • KibirkštisFazė
    What size of fuse disconnector and fuse does your circuit need? You will find a 30-second table, the cable protection rule and a comparison of fuse classes in the fuse and fuse switch disconnector selection guide.
    Read more
  • Modular fuse disconnectors for DIN rail

    A modular fuse disconnector is a cylindrical fuse holder with an isolating function. When its cover is opened, the fuse is isolated from the circuit, so it can be replaced safely. The protection is provided by the fuse, not by the disconnector: the fuse blows and is replaced with a new one – it cannot be reset.

    Fuse disconnectors are selected by fuse size (10×38, 14×51, 22×58 mm), number of poles (1P or 3P) and rated current. For control circuits there are 5×20 and 6.3×32 mm terminal fuse holders.

    Fuse size Disconnector current Where it is used
    5×20 / 6.3×32 mm up to 6.3–10 A control and measuring circuits
    10×38 mm up to 25–32 A circuits, capacitors, control
    14×51 mm up to 50 A circuits, motors
    22×58 mm up to 125 A larger circuits, compensation stages
    ⚠ Important: the disconnector current must be no lower than that of the fuse, and the fuse current no higher than 0.9 × the cable current-carrying capacity. Replace a fuse only with one of the same size, current and class (gG / aM).

    Published: 2026-11-04 · Data checked against manufacturer specifications: 2026-11-04

    Read more
    No items found.
  • Subscribtion to new arrivals

    privacy policy

    Information