Acoustic | Sound-Absorbing Foam Panel | Fine Pyramid Profile | 300x300x50mm | Black

Acoustic sound-absorbing foam panel – 300×300×50 mm, dense pyramid relief, black

Acoustic foam panel with densely arranged pyramid-shaped projections is intended to reduce echo, reverberation and some unwanted sound reflections in a room. The panel is made of sound-absorbing polyurethane foam, commonly referred to as foam rubber.

The dense pyramid surface increases the active foam area and creates numerous planes oriented at different angles. This shape helps absorb and disperse sound waves reflected from walls or ceilings. Panel dimensions: 300×300 mm, total thickness: 50 mm.

A dense repeating pattern of pyramid-shaped projections is formed on the panel surface. V-shaped recesses are created between the pyramids, while the surface contains numerous triangular planes oriented at different angles.

• increases the active sound-absorbing surface area of the foam;
• creates numerous surface zones with different depths and angles;
• helps disperse some of the sound waves returning from walls or ceilings;
• reduces direct reflections from smooth, hard surfaces;
• creates a dense, expressive geometric pattern;
• suitable for modular acoustic wall and ceiling finishing.

The panel is made of flexible polyurethane foam. It is a lightweight, elastic and easy-to-process material that can be adapted to different wall and ceiling surfaces.

• open-cell structure for absorbing part of the sound energy;
• total sound-absorbing material thickness of 50 mm;
• low weight and easier fastening;
• flexible and easy-to-cut material;
• suitable for acoustic wall and ceiling finishing;
• can be used as a soft protective foam material;
• the black colour suits studio, modern and technical interiors.

• Acoustic foam — for absorbing part of the sound energy.
• Echo reduction — to reduce the perception of reverberation in the room.
• Dense pyramid relief — for a larger active surface area.
• Sloping triangular planes — to disperse some sound reflections.
• V-shaped recesses — to create surface zones of different depths.
• 50 mm thickness — for a greater volume of sound-absorbing material.
• Lightweight construction — for easier installation.
• Flexible foam material — easy to cut and adapt.
• Modular 300×300 mm format — for larger compositions.
• Can be installed on walls or ceilings.

• In home studios — to reduce echo in voice and music recordings.
• In recording rooms — to control unwanted wall reflections.
• In broadcasting rooms — to reduce room echo captured by the microphone.
• In gaming and streaming rooms — to improve speech clarity.
• In offices — to improve acoustic comfort in the room.
• In meeting rooms — to reduce the perception of reverberation.
• In home cinema rooms — to control some sound reflections.
• In rehearsal rooms — to reduce unwanted sound reflections.
• In teaching and language classrooms — to improve speech intelligibility.
• In technical rooms — to absorb some reflections from sound emitted by equipment.

For example, in a small recording or broadcasting room, strong reflections from empty walls may be clearly audible when speaking. Dense pyramid-relief foam panels are installed behind the microphone, on side walls or at other first-reflection points.

When sound waves reach the pyramid-shaped projections, part of their energy enters the foam structure and is attenuated. The remaining part is dispersed by triangular planes arranged at different angles.

The best result is usually achieved not by using a single panel, but by strategically covering a larger wall or ceiling area.

1. Assess the room acoustics. Identify where the strongest sound reflections occur.
2. Calculate the required quantity. One panel covers an area of 0.09 m².
3. Prepare the surface. The wall or ceiling must be dry, clean and free of peeling finish layers.
4. Plan the panel layout. It is recommended to align the modules with one another to create a continuous pyramid pattern.
5. Mark the position of the first panel. Use a spirit level or laser level.
6. Choose the fastening method. Use mechanical fastening or adhesive suitable for foam.
7. Do not press the pyramid-shaped projections. Press the panel along its edges or through the flat rear side.
8. Install the panels tightly together. Do not leave unnecessary gaps between modules.
9. Cut if required. Use a sharp knife and a straight cutting ruler.
10. Check the fastening. The panels must not come unstuck or hang loosely from the ceiling.

• Remove dust with a vacuum cleaner using a soft attachment and low suction power.
• The foam surface can be cleaned with a soft brush.
• Do not press or bend the pyramid-shaped projections.
• Do not use large amounts of water.
• Do not spray cleaners directly onto the foam.
• Do not use solvents, petrol or acetone.
• Protect against sharp objects and mechanical compression.
• Keep away from open flames and strong heat sources.

• Acoustic foam is intended for dry indoor spaces.
• Do not use in locations exposed to direct contact with water.
• Foam is not a complete sound-insulation system.
• The exact sound absorption coefficient is not specified.
• No confirmed reaction-to-fire class is specified.
• Keep away from open flames, sparks and hot surfaces.
• Do not use near luminaires or equipment that become very hot.
• Unsuitable adhesives may damage polyurethane foam.
• The foam may be compressed during transport.
• After unpacking, time may be required for the original shape to recover.
• Colour and surface texture may vary slightly between batches.
• The pyramid tips may be damaged by pressing or cutting.
• Reliable fastening is essential when installing on a ceiling.

Quick selection guide

Choose the 50 mm dense pyramid-relief acoustic foam panel when you need to reduce some room echo and sound reflections and create a dense, expressive geometric wall or ceiling surface.

50 mm dense pyramid-relief acoustic foam for reducing room echo and sound reflections

The acoustic foam panel is intended to absorb part of the sound travelling through a room and reduce reflections from walls and ceilings. The densely arranged pyramid-shaped projections increase the active foam surface area and help disperse sound waves.

The 300×300×50 mm foam modules can be installed on walls or ceilings, combined into larger geometric compositions and cut to suit the shape of the room when required.

The 50 mm layer of polyurethane foam provides a greater volume of sound-absorbing material. The panels are suitable for home studios, offices, broadcasting, gaming, teaching and other dry indoor spaces.

Acoustic foam improves the internal acoustics of a room but is not a complete sound-insulation system. For precise acoustic or fire-safety design, the sound absorption and reaction-to-fire test documentation must be checked.