Acoustic | Sound-Absorbing Foam Panel | Square Relief Pattern | 300x300x50mm | Black

Acoustic sound-absorbing foam panel – 300×300×50 mm, smooth, with bevelled edges, black

Acoustic foam panel with a smooth central surface and bevelled edges is intended to reduce echo, reverberation and some unwanted sound reflections in a room. The panel is made of sound-absorbing polyurethane foam, commonly referred to as foam rubber.

A wide smooth surface is formed in the centre of the panel and surrounded by bevelled edges. This profile creates a restrained, neat acoustic finish and allows the panels to be joined into a continuous modular composition. Panel dimensions: 300×300 mm, total thickness: 50 mm.

The panel surface features a wide, smooth central section surrounded on all four sides by a bevelled border. This geometry gives the panel the appearance of a recessed square segment or a soft acoustic frame.

• creates a neat and minimalist acoustic-finishing surface;
• the bevelled edges create surface zones at different angles;
• helps reduce the effect of a completely flat wall surface;
• the panels can be joined into a regular square grid;
• the shape suits modern and understated interiors;
• suitable for decorative acoustic wall and ceiling finishing.

The panel is made of flexible polyurethane foam. It is a lightweight, elastic and easy-to-process material that can be adapted to different wall and ceiling surfaces.

• open-cell structure for absorbing part of the sound energy;
• total sound-absorbing material thickness of 50 mm;
• low weight and easier fastening;
• flexible and easy-to-cut material;
• suitable for acoustic wall and ceiling finishing;
• can be used as a soft protective foam material;
• the black colour suits studio, minimalist and technical interiors.

• Acoustic foam — for absorbing part of the sound energy.
• Echo reduction — to reduce the perception of reverberation in the room.
• Smooth central surface — for a restrained and continuous finish.
• Bevelled edges — for surface zones at different angles.
• Frame-shaped profile — for a neat modular pattern.
• 50 mm thickness — for a greater volume of sound-absorbing material.
• Lightweight construction — for easier installation.
• Flexible foam material — easy to cut and adapt.
• Modular 300×300 mm format — for larger compositions.
• Can be installed on walls or ceilings.

• In home studios — to reduce echo in voice and music recordings.
• In recording rooms — to control unwanted wall reflections.
• In broadcasting rooms — to reduce room echo captured by the microphone.
• In gaming rooms — to improve speech and sound clarity.
• In offices — to improve acoustic comfort in the room.
• In meeting rooms — to reduce the perception of reverberation.
• In home cinema rooms — to control some sound reflections.
• In rehearsal rooms — to reduce unwanted sound reflections.
• In classrooms — to improve speech intelligibility.
• In technical rooms — to absorb some reflections from equipment noise.

• Remove dust with a vacuum cleaner using a soft attachment and low suction power.
• The foam surface can be cleaned with a soft brush.
• Do not press or rub the bevelled edges.
• Do not use large amounts of water.
• Do not spray cleaners directly onto the foam.
• Do not use solvents, petrol or acetone.
• Protect against sharp objects and mechanical compression.
• Keep away from open flames and strong heat sources.

• Acoustic foam is intended for dry indoor spaces.
• Do not use in locations exposed to direct contact with water.
• Foam is not a complete sound-insulation system.
• The exact sound absorption coefficient is not specified.
• No confirmed reaction-to-fire class is specified.
• Keep away from open flames, sparks and hot surfaces.
• Do not use near luminaires or equipment that become very hot.
• Unsuitable adhesives may damage polyurethane foam.
• The foam may be compressed during transport.
• After unpacking, time may be required for the original shape to recover.
• Colour and surface texture may vary slightly between batches.
• The bevelled edges may be damaged by pressing or cutting.
• Reliable fastening is essential when installing on a ceiling.

Quick selection guide

Choose the 50 mm acoustic foam panel with a smooth surface and bevelled edges when you need to reduce some room echo and sound reflections but prefer a more restrained, minimalist wall or ceiling finish.

50 mm acoustic foam with a smooth surface and bevelled edges for reducing room echo

The acoustic foam panel is intended to absorb part of the sound travelling through a room and reduce reflections from walls and ceilings. The smooth central surface and bevelled edges create a restrained, modular acoustic-finishing profile.

The 300×300×50 mm foam modules can be installed on walls or ceilings, joined into larger regular compositions and cut to suit the shape of the room when required.

The 50 mm layer of polyurethane foam provides a greater volume of sound-absorbing material. The panels are suitable for home studios, offices, broadcasting, gaming, teaching and other dry indoor spaces.

Acoustic foam improves the internal acoustics of a room but is not a complete sound-insulation system. For precise acoustic or fire-safety design, the sound absorption and reaction-to-fire test documentation must be checked.