Acoustic | Sound-Absorbing PET Panel | Hexagonal Shape | Linear Pattern Relief | 150x260x300x9mm | Black

Acoustic sound-absorbing PET panel – hexagonal, with directional grooves, 150×260×300×9 mm, black

Hexagonal acoustic PET fibre panel with a directional linear pattern is intended to reduce room echo, reverberation and some unwanted sound reflections. The panel is made of pressed PET polyester fibre and can be used as a functional and decorative acoustic finish for walls or ceilings.

The panel surface is divided into several geometric zones in which narrow parallel grooves are arranged in different directions. This composition creates a dynamic segmented pattern that changes depending on the panel orientation and the arrangement of adjacent modules.

Panel height – approximately 300 mm, width – approximately 260 mm, hexagon side length – approximately 150 mm, and thickness – 9 mm.

The panel has a regular hexagonal shape. Six sides allow the modules to be joined closely together and arranged into honeycomb-like compositions.

• suitable for honeycomb-style wall compositions;
• the panels can be installed closely together or with equal gaps;
• modules rotated in different directions can be combined;
• hexagonal panels in several colours can be combined;
• suitable for partial coverage or larger wall areas;
• allows both regular and freely arranged geometric compositions to be created.

The panel surface is divided into geometric sections. Parallel grooves are formed in each section, but their direction changes between the individual segments.

• creates a directional and dynamic geometric pattern;
• divides the continuous surface into several linear zones;
• allows the overall pattern to be changed by rotating the panel;
• adjacent modules can be oriented in the same or different directions;
• suitable for modern, minimalist and technical interiors;
• can be used as both acoustic and decorative finishing.

The panel is made of pressed PET polyester fibre. It is stiffer and retains its shape better than soft polyurethane foam, making it suitable for decorative modular wall and ceiling finishing.

• porous fibre structure for absorbing part of the sound energy;
• rigid, shape-retaining construction;
• thin 9 mm profile;
• low weight and easier installation;
• can be cut and adapted to the installation location;
• up to 60% of the composition may consist of recycled PET material;
• the black colour suits modern, minimalist and technical interiors.

• PET fibre construction — for absorbing part of the sound energy.
• Echo reduction — to reduce the perception of reverberation in the room.
• Hexagonal shape — for creating geometric compositions.
• Directional grooves — for a dynamic linear surface.
• Different groove directions — for a segmented pattern.
• Adjustable module orientation — for different compositions.
• 9 mm thickness — for compact acoustic finishing.
• Stiffer material — to retain its shape.
• Up to 60% recycled PET — depending on the production composition.
• Can be installed on walls or ceilings.

• In offices — to improve acoustic comfort in the room.
• In meeting rooms — to reduce echo and reverberation.
• In home workspaces — to improve conversation clarity.
• In recording rooms — to control some wall reflections.
• In broadcasting rooms — to reduce echo captured by the microphone.
• In teaching rooms — to improve speech intelligibility.
• In hotels and lounge areas — for decorative acoustic finishing.
• In restaurants and cafés — to reduce the overall perception of reverberation.
• In gaming and home cinema rooms — to soften some sound reflections.
• In corridors and shared areas — for geometric wall finishing.

1. Assess the room acoustics. Identify the locations where the strongest sound reflections occur.
2. Plan the composition. Decide whether the grooves on all panels will be oriented in the same or different directions.
3. Prepare the surface. The wall or ceiling must be dry, clean and free of loose finishing layers.
4. Mark the centre of the composition. A hexagonal pattern is most conveniently started from the selected central module.
5. Check the position of the first panel. Use a spirit level or laser level.
6. Choose the fastening method. Use adhesive or mechanical fasteners suitable for PET panels and the substrate.
7. Press the panel evenly. Do not press only on the groove edges, as this may deform them.
8. Control the gaps. The gaps between all modules should be equal, or the panels should join closely together.
9. Cut if necessary. Use a sharp knife or another cutting tool suitable for PET fibre.
10. Check the fastening. The panels must not detach, bend or hang loosely from the ceiling.

• Remove dust with a vacuum cleaner using a soft attachment and low suction power.
• The surface can be cleaned with a dry soft cloth or brush.
• Remove dust accumulated in the grooves with a soft brush.
• Do not rub the fibrous surface with coarse brushes.
• Do not use large amounts of water.
• Do not spray cleaners directly onto the panel.
• Do not use solvents, petrol or acetone.
• Keep away from open flames and strong heat sources.

• The PET acoustic panel is intended for dry indoor spaces.
• Do not use in locations exposed to direct contact with water.
• The panel is not a complete sound-insulation system.
• The exact sound absorption coefficient is not specified.
• No confirmed reaction-to-fire class is specified.
• The non-toxicity claim must be assessed according to the product documentation.
• Keep away from open flames, sparks and hot surfaces.
• Unsuitable adhesive may alter the panel colour or deform it.
• Cutting may produce uneven or frayed edges.
• Colour and surface texture may vary slightly between batches.
• The actual recycled PET content may vary.
• Reliable fastening is essential when installing on a ceiling.

Quick selection guide

Choose the 9 mm hexagonal PET acoustic panel with directional grooves when you need to reduce some room echo and sound reflections and create a thin, modular wall or ceiling surface with a directional geometric pattern.

Hexagonal PET acoustic panel with directional grooves for geometric wall finishing

The hexagonal acoustic PET fibre panel is intended to absorb part of the sound travelling through a room and reduce reflections from walls and ceilings. Linear grooves arranged in several directions create an expressive segmented geometric pattern.

The panels can be rotated in different directions, combined into honeycomb-style compositions and used to create various wall or ceiling patterns. The 9 mm pressed PET construction remains thin, rigid and suitable for decorative acoustic finishing.

The supplied information states that up to 60% of the panel composition may consist of recycled PET material. The panel is suitable for offices, meeting rooms, training rooms, broadcasting rooms, recreational areas and other dry indoor spaces.

The PET acoustic panel improves room acoustics but is not a complete sound-insulation system. For precise acoustic or fire-safety design, sound-absorption, reaction-to-fire and material-emission documentation must be checked.