Anchor / support clamp fixing hook | 150x131mm | Ø20mm | hot-dip galvanized

The hook can be used for connecting anchor and suspension clamps to poles and facades. Steel band mounting allows the hook to be installed without drilling the pole, where this installation method is permitted by the specific system design.

This installation method is particularly suitable for round or polygonal poles where the hook needs to be attached without additional drilling. The type, width, thickness and tension of the steel band must be selected according to the specific load and mounting system.

• Designed for anchor and suspension clamps.
• Mounting to poles or facades.
• Installed using steel banding.
• Hot-dip galvanized surface.
• Hook rod diameter Ø20mm.
• Resistant to atmospheric conditions.
• Designed for outdoor infrastructure fastening systems.

• Simple installation using steel banding.
• No need to drill the pole when using the band mounting system.
• Suitable for different types of poles and facades.
• Hot-dip galvanized corrosion protection.
• Strong metal construction.
• Universal connection point for various anchor and suspension clamps.
• Suitable for outdoor and atmospheric conditions.

• A separate steel mounting band is required together with suitable elements for tensioning and securing it.
• The band parameters must be selected according to the load – an unsuitable or insufficiently tensioned band may reduce the reliability of the connection.
• The hook must not be evaluated separately from the complete fastening system.
• Damage to the zinc coating may reduce local corrosion resistance.
• Compatibility with the specific anchor or suspension clamp must be checked before use.

An anchor clamp for an overhead cable needs to be installed on an outdoor electrical or telecommunications pole. The hook is positioned against the pole at the required height.

One or more steel mounting bands specified in the design are passed through the slots in the base. The bands are wrapped around the pole, tensioned and secured using suitable fastening elements.

A compatible anchor or suspension clamp is attached to the upper hook. The mechanical load of the cable is transferred through the clamp and hook to the pole.

The mechanical reliability of the complete system depends on the compatibility and correct installation of the hook, steel band, band lock, clamp, pole and cable.

It is designed for mounting anchor and suspension clamps to poles and building facades.

The hook is installed using a steel mounting band passed through the slots in the base and wrapped around the pole.

When the intended steel band mounting method is used, drilling the pole is not required.

Yes. The product is intended for outdoor use and has a hot-dip galvanized surface.

The product is suitable for operation under UV and solar radiation exposure.

L – 150mm, L1 – 50mm, H – 131mm, hook rod diameter – Ø20mm.

Yes. This is one of the main applications of this type of hook; however, the mechanical and geometrical compatibility of the specific clamp must be checked.

Yes, provided that the structure and selected fastening method are suitable for the expected load.

The hook, steel mounting band and clamp must be selected according to the mechanical loads of the specific system, pole construction and project requirements. The steel band must be properly tensioned and secured, while the hook itself must rest firmly against the supporting structure.

Before installation, check for mechanical deformation, welding damage or significant defects in the zinc coating. The final load-bearing capacity of the connection is determined not by the hook alone, but by the complete fastening system.