
Solar PV cable | H1Z2Z2-K | 1x4 mm² | black | 1.5 kV DC | EN 50618 | Dca | IEMMEQU HAR
Code: H1Z2Z2KPrice 0.98 € VAT incl.( 0.81 € VAT excl. )The cable is designed for connecting photovoltaic (solar energy) systems and interconnecting solar modules. This cable offers excellent resistance to ultraviolet (UV) rays, ozone, atmospheric effects, and temperature fluctuations. A durable and flexible single-core copper cable with double insulation ensures long service life and safe use even in the most challenging outdoor conditions. Suitable for installation both indoors and outdoors.
-
Solar PV cable | H1Z2Z2-K | 1x4 mm² | black | 1.5 kV DC | EN 50618 | Dca | IEMMEQU HAR
Single-core 4 mm² H1Z2Z2-K solar cable with black sheath – the standard choice for the DC side of a photovoltaic plant: connecting modules into strings and connecting strings to the inverter. The cable is manufactured to EN 50618, marked IMQ (IEMMEQU) and HAR, CPR reaction-to-fire class Dca.
Key point:
4 mm² is the most common cross-section in residential and commercial solar plants: it matches typical module current and fits most MC4 connectors and inverter DC terminals. Certified to EN 50618 and HAR marked – important when the site is accepted by the grid operator or insurer.Cross-section
1x4 mm², tinned Cu, class 5Rated voltage
1.5/1.5 kV DC (max. 1.8 kV DC)Current rating
55 A – single cable in air, 60 °C ambientStandard
EN 50618 · CPR Dca · HARHow it works
The cable runs from the solar module connectors (usually MC4 type) to the combiner box or the inverter DC input. Construction: fine-stranded class 5 tinned copper conductor, cross-linked halogen-free insulation and an outer sheath of the same material – double insulation.
The cross-linked insulation allows operation at -40…+90 °C ambient and up to +120 °C conductor temperature, so the cable is suitable for routing under modules on a roof, where summer temperatures far exceed the limits of ordinary installation cables.
The result is a reliable DC line resistant to UV, ozone and weather. Mechanical protection (conduit, trunking) is selected according to the specific route.
Why choose H1Z2Z2-K 1x4 mm²?
A universal PV cable with proven compliance: EN 50618, HAR and CPR class Dca. It connects modules and runs the string to the inverter when the distance is short; for longer runs choose the 6 mm² cross-section.Technical specifications
Product type Solar (PV) cable, single-core Type designation H1Z2Z2-K Product code H1Z2Z2K Cross-section 1x4 mm² Conductor Tinned copper, fine-stranded, class 5 (IEC 60228) Conductor resistance at 20 °C ≤ 5.09 Ω/km Rated voltage AC 1.0/1.0 kV; DC 1.5/1.5 kV Maximum operating voltage 1.8 kV DC Test voltage AC 6.5 kV Current rating (60 °C ambient, EN 50618) 55 A – single cable in air; 52 A – single cable on a surface; 44 A – two touching cables on a surface Operating temperature Ambient -40…+90 °C; conductor up to +120 °C Short-circuit temperature 250 °C, 5 s Insulation and sheath Cross-linked halogen-free elastomer, double insulation Resistance UV, ozone, weathering (per EN 50618) Flammability Flame retardant (EN 60332-1-2); CPR class Dca Sheath colour Black Marking IEMMEQU (IMQ), HAR Standard EN 50618 Main features
- Double cross-linked insulation – lower risk of insulation damage and earth faults in the DC circuit.
- 1.5 kV DC rated voltage – suitable for 1500 V DC system strings, not only for residential 600–1000 V inverters.
- Tinned fine-stranded copper – flexible routing and stable contact in crimped MC4 connectors.
- 4 mm² cross-section – matches the range of most MC4 connectors and inverter DC terminals.
- UV and ozone resistance – suitable for open outdoor routing under modules and on structures.
- HAR marking and CPR class Dca – documented compliance for site acceptance and installation in buildings.
Where is it used?
- Solar plants on residential roofs
- Rooftop plants on commercial buildings
- Connecting modules into strings
- DC lines to the inverter over short distances
- PV inputs of hybrid inverters
- Ground-mounted plants – string connections
- Repair and extension of existing plants
- Off-grid solar systems for country houses
Use by need
For PV installers.
Standard 4 mm² cable with EN 50618, HAR and CPR Dca marking – fits most residential sites without extra checks.For designers.
Clear current rating (55 / 52 / 44 A) and resistance (≤ 5.09 Ω/km) data for voltage-drop calculations.For home owners.
For plant repair or extension – the same cable type most residential plants are installed with.Practical example
If the inverter is in the attic and the string ends on the roof are 20 m away, the circuit has about 40 m of cable (plus and minus). At 10 A and 20 °C conductor temperature, the voltage drop in 4 mm² cable is about 2.0 V – at a 400 V string voltage that is ~0.5 %. When the distance is much longer, it is worth calculating the 6 mm² option.Pros
- Complies with EN 50618, marked HAR and IMQ
- 1.5 kV DC rated, 1.8 kV DC maximum voltage
- Double cross-linked insulation
- Fits most MC4 connectors and inverters
- UV and ozone resistant, operating temperature -40…+90 °C
- Halogen-free, declared CPR class Dca
Cons / limitations
- Intended for the DC side of a PV plant; for the AC side select an installation cable per design
- Higher voltage drop on long runs than 6 mm² cable
- MC4 connectors must be rated for 4 mm² and this cable's outer diameter
- No armour – not suitable for direct burial without a protective conduit
Safety and installation notes
- Modules always generate DC voltage in daylight – make connections with the DC isolator open and the string ends not joined.
- Crimp MC4 connectors only with the proper tool; mate connectors of the same manufacturer and type.
- Observe the manufacturer's minimum bending radius; do not bend the cable right at the connector.
- Fix with UV-resistant clips, avoid sharp structural edges and cable flapping in the wind.
- Mark plus and minus conductors to avoid reversed polarity.
- Install according to HD 60364-7-712 and the design.
Quick selection guide
H1Z2Z2-K1x4 mm²1.5 kV DC55 A in air (60 °C)-40…+90 °CEN 50618 · DcaSuitable when you need:- connecting modules into strings
- DC runs to the inverter over short distances
- cable for open outdoor routing under modules
- EN 50618 / HAR marked cable for site acceptance
Check before use:- whether MC4 connectors and inverter DC terminals are rated for 4 mm²
- voltage drop if the run is long
- current rating with derating factors when cables are grouped
Important reminder: the cable does not replace DC protection – string fuses, DC isolator and surge protection are selected according to the design.FAQ
Is it compatible with MC4 connectors?
Yes, if the connector is rated for 4 mm² and this cable's outer diameter.When to choose 6 mm² instead of 4 mm²?
When the DC run is long or the current is high and the 4 mm² voltage drop exceeds the design limit.Can it be routed outdoors without conduit?
Yes, the cable is UV and ozone resistant per EN 50618, but protection is needed where mechanical damage is possible.Can it be buried in the ground?
Only in a protective conduit – the cable has no armour.What is the current rating?
Per EN 50618 – 55 A for a single cable in air at 60 °C ambient; it decreases when grouped.What do IEMMEQU, HAR and Dca mean?
IEMMEQU is the IMQ certification mark, HAR is the harmonised cable mark, Dca is the CPR reaction-to-fire class.Solar PV cable | H1Z2Z2-K | 1x4 mm² | black | 1.5 kV DC | EN 50618 | Dca | IEMMEQU HAR
H1Z2Z2-K 1x4 mm² black solar cable to EN 50618 – 1.5 kV DC, double cross-linked halogen-free insulation, tinned copper, 55 A in air and CPR class Dca. The standard choice for DC connections in residential and commercial solar plants.
Published: 2026-11-17 · Data verified against EN 50618 requirements and H1Z2Z2-K 1x4 mm² manufacturer datasheets: 2026-11-17
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products



