Products catalog

  • Solar PV cable | H1Z2Z2-K | 1x70 mm² | black | 1.5 kV DC | EN 50618 | SolarPlus | 1 m

    Code: 041046

    H1Z2Z2-K is a specialized photovoltaic cable designed for use in solar energy systems according to the requirements of EN 60364-7-712. It is suitable for both flexible use and fixed installation, both indoors and outdoors, as well as in industrial and agricultural environments. Additionally, the cable can be directly buried in the ground and is resistant to UV radiation, ozone, and extreme temperatures. 

    Due to its flexible, finely stranded class 5 tinned copper conductor construction, the cable offers high conductivity efficiency and mechanical resistance. The double cross-linked polyolefin copolymer insulation ensures durability and resistance to harsh conditions. 

  • Solar PV cable | H1Z2Z2-K | 1x70 mm² | black | 1.5 kV DC | EN 50618 | SolarPlus | 1 m

    Single-core flexible 70 mm² H1Z2Z2-K cable to EN 50618 for high-current DC lines in solar plants and energy storage systems: from combiner boxes to the inverter, between the battery bank and a hybrid inverter. Price is per 1 m.

    Key point:
    A 70 mm² cross-section is needed where DC current is measured in hundreds of amps – in low-voltage (48 V) battery systems or combined string lines. Fine-stranded class 5 copper bends easily in panels and battery cabinets, and the EN 50618 design withstands outdoor conditions.
    Cross-section
    1x70 mm², tinned Cu, class 5
    Rated voltage
    1.0/1.0 kV AC; 1.5/1.5 kV DC
    Current rating
    347 A – single cable in air, 60 °C ambient
    Standard
    EN 50618 · TÜV

    How it works

    The cable connects high-current DC circuit points: the battery bank to the inverter or DC isolator, the combiner box to a central inverter, DC busbars in panels. Construction: fine-stranded class 5 tinned copper conductor, cross-linked polyolefin insulation and a halogen-free flame-retardant (FRNC) sheath.

    The conductor may operate continuously up to +120 °C, and fixed installations are permitted at -40…+90 °C ambient. The sheath resists UV, ozone, moisture and abrasion, so the cable can be routed indoors and outdoors.

    The result is low resistance (≤ 0.277 Ω/km) and low voltage drop even at hundreds of amps, provided the cable is sized and terminated with suitable lugs.

    Why choose H1Z2Z2-K 1x70 mm²?
    One flexible cable for high DC current – no need for several thinner conductors in parallel. That means simpler installation, fewer joints and lower overheating risk in battery and inverter circuits.

    Technical specifications

    Product type Solar (PV) cable, single-core, flexible
    Type designation H1Z2Z2-K
    Product code 041046
    Cross-section 1x70 mm²
    Conductor Tinned copper, fine-stranded, class 5 (IEC 60228)
    Conductor resistance at 20 °C ≤ 0.277 Ω/km
    Rated voltage AC 1.0/1.0 kV; DC 1.5/1.5 kV
    Current rating (60 °C ambient, EN 50618) 347 A – single cable in air
    Operating temperature Fixed installation -40…+90 °C; flexible use -25…+60 °C; conductor up to +120 °C
    Insulation Cross-linked polyolefin copolymer
    Sheath FRNC – halogen-free, flame retardant
    Flammability and smoke IEC 60332-1-2; low smoke IEC 61034; halogen-free IEC 60754
    Resistance UV, ozone, moisture, abrasion
    Outer diameter approx. 16.5 mm
    Minimum bending radius Fixed – 4 × D; moving – 6 × D
    Weight approx. 741 kg/km (copper – 672 kg/km)
    Max. pulling force 1050 N
    Colour Black
    Standard, certificate EN 50618 (VDE 0283-618), TÜV
    Sales unit 1 m

    Main features

    • 70 mm² cross-section – high DC current through one cable, without parallel conductors.
    • Low resistance – lower losses and voltage drop in 48 V battery systems.
    • Fine-stranded class 5 copper – bends in tight battery cabinets and panels.
    • Tinned conductor – more stable contact in crimped lugs, less oxidation.
    • FRNC sheath – halogen-free, low smoke – suitable for technical rooms.
    • UV and ozone resistance – can also be routed outdoors.

    Where is it used?

    • Battery bank connection to a hybrid inverter
    • 48 V energy storage systems
    • Combined string lines to a central inverter
    • Connecting DC busbars and DC isolators
    • Commercial and farm solar plants
    • Off-grid systems with a large battery bank
    • Technical rooms and containerised storage
    • Outdoor DC routes between equipment

    Use by need

    For electricians / installers.
    A flexible 70 mm² cable that bends more easily in a battery cabinet than a rigid conductor, matched with 70 mm² lugs.
    For designers.
    Clear resistance (≤ 0.277 Ω/km) and current rating (347 A in air per EN 50618) for voltage-drop and protection calculations.
    For farm or business owners.
    Lets you install a higher-power storage system without compromising on cable cross-section.

    Practical example

    If a 48 V battery bank is connected to a 10 kW hybrid inverter, DC current can reach about 210 A. With batteries and inverter 5 m apart (10 m of cable for plus and minus), the voltage drop in 70 mm² cable at 20 °C is about 0.6 V – about 1.2 % of 48 V. The cable and protective device are still selected according to the inverter manufacturer's instructions and installation conditions.

    Pros

    • High current rating – 347 A in air (EN 50618)
    • Low resistance – ≤ 0.277 Ω/km
    • Flexible class 5 tinned copper
    • Halogen-free FRNC sheath, low smoke
    • UV, ozone and abrasion resistant
    • Sold by the metre – as much as you need

    Cons / limitations

    • Requires 70 mm² lugs and a hydraulic crimper
    • Heavy (approx. 0.74 kg/m) – needs firm fixing
    • Current rating decreases when grouped or at higher temperatures
    • Intended for DC circuits; for the AC side select an installation cable per design

    Safety and installation notes

    • Open the battery DC isolator before connecting the battery circuit – a short circuit causes very high current.
    • Crimp lugs only with a proper 70 mm² tool; check that the conductor is fully inserted.
    • Tighten each battery terminal connection to the manufacturer's torque.
    • Fix the cable so its weight does not load the terminals; observe the 4 × D bending radius.
    • Protect each cable with a fuse or DC breaker according to the design.
    • Install according to HD 60364-7-712 and the equipment manufacturer's instructions.

    Quick selection guide

    H1Z2Z2-K
    1x70 mm²
    1.5 kV DC
    347 A in air (60 °C)
    -40…+90 °C
    EN 50618 · TÜV
    Suitable when you need:
    • high DC current between batteries and inverter
    • combined string lines to a central inverter
    • flexible conductor in a battery cabinet
    • cable for outdoor and indoor routes
    Check before use:
    • the cross-section accepted by inverter and battery terminals
    • suitability of lugs and crimper for 70 mm²
    • current rating with derating factors for your installation conditions
    Important reminder: the cable does not replace DC protection – fuses and DC isolators are selected according to the design and equipment manufacturer requirements.

    FAQ

    How is it sold?
    By the metre – price is per 1 m.
    What is the current rating?
    Per EN 50618 – 347 A for a single cable in air at 60 °C ambient; it decreases when grouped.
    Is it suitable for batteries?
    Yes, it is a flexible 1.5 kV DC cable suitable for battery and inverter DC connections.
    Which lugs should I use?
    Copper (tinned) 70 mm² tubular lugs with the required stud size.
    Can it be routed outdoors?
    Yes, the sheath is UV and ozone resistant.
    What is the bending radius?
    Fixed – at least 4 × D (approx. 66 mm), moving – 6 × D.

    Solar PV cable | H1Z2Z2-K | 1x70 mm² | black | 1.5 kV DC | EN 50618 | SolarPlus | 1 m

    H1Z2Z2-K 1x70 mm² black flexible cable to EN 50618 – 1.5 kV DC, tinned class 5 copper, ≤ 0.277 Ω/km, 347 A in air, halogen-free FRNC sheath. For high-current DC lines between batteries, inverters and solar plant combiner boxes.

    Published: 2026-11-17 · Data verified against EN 50618 requirements and the supplier SolarPlus 1x70 mm² specification: 2026-11-17

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

  • privacy policy

    Information