Cable tie mounting clip | nail-in masonry type | 37 mm | black | 100 pcs | 4772124000384

Cable tie mounting clip – nail-in masonry type, 37 mm, black, 100 pcs

Cable tie mounting clip is designed for securing cables, wires and installation bundles to masonry, concrete or other solid surfaces. The holder is used together with cable ties when a neat electrical, communication, automation, alarm or low-current cable route needs to be formed.

• Quick fastening into masonry – the holder is hammered into a solid base.
• Designed for cable ties – allows wires or cable bundles to be secured.
• 37 mm size – practical for electrical and communication installations.
• Black colour – matches dark cables, technical areas or black installation elements.
• 100 pcs package – convenient for larger installation works.
• Fast cable route formation – helps maintain a neat cable layout.
• Suitable for electrical, communication, automation and low-current cables – used in various installations.

• Electrical installations – for fixing wires and cables to masonry or concrete.
• Cable routes – for forming cable bundles on walls, ceilings or structures.
• Low-current systems – for communication, alarm, internet, CCTV or control cables.
• Electrical panels and technical areas – for maintaining cable order in auxiliary mounting locations.
• Server rooms and communication cabinets – for cable management where the base is suitable for nail-in fastening.
• Automation cabinets and equipment – for control, signal or auxiliary cable management.
• Garages, workshops and warehouses – for fixing wires to solid surfaces.

For example, when installing electrical wiring in a masonry building, the holders are hammered into the wall at set intervals. Cable ties are passed through the holders and used to secure electrical, communication or alarm cables.

This keeps cables neat, prevents sagging, reduces tangling and keeps them close to the mounting surface. This solution is convenient when cable bundles need to be fixed quickly in one route.

For electricians: convenient for quickly fixing cable bundles to masonry or concrete surfaces.

For low-current installers: suitable for internet, alarm, CCTV or control cable routes.

For automation works: can be used for fixing control, signal or auxiliary cables.

For maintenance and repair works: can be used in garages, warehouses, workshops or utility rooms to keep cables organised.

Before installation, make sure the base is sufficiently strong and suitable for a nail-in holder. The holder should be installed carefully so that the surface is not damaged and the holder remains stable in the selected position.

• Install only into a suitable solid base, such as masonry or concrete.
• Do not use on weak or crumbling surfaces if the holder cannot remain stable.
• Secure cables with cable ties selected according to the number and diameter of cables.
• Do not overtighten cables to avoid damaging their insulation.
• Place holders evenly so that the cable route does not sag.
• Do not use for fastening structural elements.

Quick selection guide

Choose the 37 mm nail-in cable tie holder when cable ties need to be quickly fixed to a masonry or concrete base and a neat cable route needs to be formed.

For neat cable tie fixing into masonry

The 37 mm black nail-in cable tie holder is a practical solution for securing cable routes, electrical installations, communication wires, alarm, automation or control cables to masonry or concrete.

Thanks to nail-in fastening, compatibility with cable ties, 37 mm size, black colour and 100 pcs package, this holder is suitable for electricians, low-current installers, automation works, technical rooms, garages, workshops and other cable management tasks.