Products catalog

  • Cam switch | changeover switch | 1-0-2 | 3P | 16A | IP65 | surface-mounted | Vexen | PNRS1653

    Code: PNRS1653

    A cam switch-changeover switch is a reliable three-position 1-0-2 surface-mounted changeover switch designed for controlling, switching and disconnecting electrical circuits. Thanks to its 3-pole construction, 16A current rating and IP65 protection class, this switch is suitable for use both indoors and in more demanding environments where protection against dust and water splashes is required.

    This 1-0-2 cam changeover switch is most commonly used for switching electrical equipment, motors, control circuits, fans, pumps, lighting or other systems between two operating modes. The middle 0 position allows the circuit to be safely disconnected. 

  •  

    Industrial Angled Socket – 3P 32A 230V 2P+PE IP44

    Industrial angled socket, designed for connecting 230 V electrical equipment in industrial, commercial, technical, or agricultural environments. This is a 3P / 2P+PE type, 32 A rated socket with an angled connection, designed for wall or surface mounting. The IP44 protection class provides resistance against solid particles and water splashes, making it suitable for technical rooms, workshops, warehouses, and other locations where a reliable industrial electrical connection is required.

    Key concept:
    This angled industrial socket is designed for the convenient and secure connection of 32 A 230 V equipment, when wall mounting and an angled cable entry are required. It is a practical solution when equipment needs to be connected to a stationary installation using an industrial plug.
    Current
    32 A
    Voltage
    230 V
    Contacts
    3P / 2P+PE
    Protection
    IP44

    Working principle

    The industrial socket is used as a stationary electrical connection point. The socket is mounted on a wall or other surface, and 230 V electrical equipment with a compatible industrial plug is connected to it. The angled design allows for more convenient cable routing and reduces uncomfortable cable protrusion from the mounting location.

    The 2P+PE contact system means the socket has two working poles and a protective earthing contact. The 6h position indicates the orientation of the earthing contact according to the standard industrial connector marking logic to prevent incorrect plug and socket matching.

    Why is an angled connection important?
    The angled socket housing allows for more convenient wall mounting and tidier routing of the connected cable. This is especially useful when there is limited space at the installation site, when the cable must run along the wall, or when you want to reduce mechanical stress at the connection point.

    Technical parameters

    Product type Industrial socket
    Manufacturer IEK
    Socket type Industrial angled socket
    Pole / contact marking 3P / 2P+PE
    Rated current 32 A
    Rated voltage 230 V
    Earthing contact position 6h
    Protection class IP44
    Mounting method Angled wall / surface mounting
    Connection type Angled connection
    Area of use Industrial, technical, commercial, agricultural and workshop electrical installation
    Suitable for use with Compatible 32 A 230 V 2P+PE industrial plugs

    Where is it used?

    • In workshops and service centers – for connecting 230 V equipment where a more robust industrial socket is required.
    • In warehouses and technical rooms – for setting up stationary connection points.
    • In agricultural buildings – for connecting equipment, pumps, fans, or other electrical loads, if parameters are compatible.
    • In industrial environments – when a 32 A 230 V industrial connection with grounding is required.
    • In temporary or technical installations – when convenient surface/wall mounting of the socket is required.

    Practical installation example

    For example, the socket is mounted on the wall of a workshop, warehouse, or technical room. 230 V equipment with a compatible 32 A 2P+PE industrial plug is connected to it. The angled design of the socket allows the cable to run more conveniently along the wall and reduces the protrusion of the connection from the mounting location.

    Such a solution is suitable where a household-type socket is insufficient due to load, environmental conditions, or the need for mechanical durability.

    Pros

    • 32 A rated current – suitable for higher-load 230 V equipment when using a compatible plug and proper wiring.
    • 2P+PE contact system – includes a protective earthing contact.
    • Angled design – more convenient cable routing against the wall or surface.
    • IP44 protection – protection against solid particles and water splashes.
    • Industrial format – more reliable solution than a standard household socket for technical environments.
    • Wall mounting – suitable for setting up a stationary connection point.
    • Clear 6h position – helps ensure compatibility with the correct type of industrial plug.

    Cons / limitations

    • Requires a compatible plug – use only with a corresponding 32 A 230 V 2P+PE 6h industrial plug.
    • Not suitable for three-phase 400 V equipment – this socket is intended for 230 V 2P+PE connection.
    • IP44 is not full outdoor protection – in open environments, consider the risk of rain, UV, dust, and mechanical impact.
    • Installation must be performed by a professional – it is necessary to correctly select the cable, protection, and wiring diagram.
    • Not suitable if a fully hermetic solution is required – for aggressive or very humid environments, a higher IP class may be needed.

    Safety and installation notes

    An industrial socket is an electrical installation component; therefore, before installation, it is necessary to evaluate the load, cable cross-section, protection device, grounding, and the compatibility of the plug being used.

    • Installation must be performed by a qualified electrician in compliance with applicable electrical safety requirements.
    • Use only with a compatible plug – 32 A, 230 V, 2P+PE, 6h type industrial connector.
    • Before connection, check that the electrical line and protection devices are adapted for 32 A current.
    • IP44 protection does not mean the socket can be mounted in any outdoor conditions without additional protection.
    • Do not exceed rated current and voltage – this can cause overheating, contact damage, or fire risk.

    Quick selection guide

    IEK PSN11-032-3 – a suitable choice when you need a 230 V industrial angled socket with 32 A rated current, 2P+PE contact system, and IP44 protection class. The socket is designed for wall or surface mounting and use with compatible industrial plugs.

    Current
    32 A
    Voltage
    230 V
    Contacts
    2P+PE
    Protection
    IP44
    Suitable when you need to:
    • set up a 230 V 32 A industrial connection point;
    • mount the socket on a wall or surface;
    • use an angled connection for more convenient cable routing;
    • connect equipment with a compatible 2P+PE 6h industrial plug;
    • use the socket in workshops, technical rooms, warehouses, or agricultural facilities.
    Check before installation:
    • whether the equipment uses 230 V, not 400 V power;
    • whether the 2P+PE 6h connector type is specifically required;
    • whether the electrical line is adapted for 32 A load;
    • whether the IP44 protection class is sufficient for the mounting location;
    • whether a compatible industrial plug will be used.
    Important reminder:
    This socket is intended for 230 V 2P+PE connection. It cannot be used as a 400 V three-phase socket if the equipment requires a different number of poles, voltage, or earthing contact position.

    FAQ – frequently asked questions

    What is this industrial socket for?
    This socket is designed for connecting 230 V electrical equipment using a compatible 32 A 2P+PE industrial plug.
    Is this a three-phase 400 V socket?
    No. Although the marking indicates a 3P / 2P+PE construction, this product is intended for 230 V 2P+PE connection, not 400 V three-phase equipment.
    What does 2P+PE mean?
    2P+PE means two working poles and a protective earthing contact. Such a connector is used for 230 V equipment with grounding.
    What does 6h mean?
    6h indicates the position of the earthing contact in an industrial connector. This helps ensure that the socket is used only with a compatible plug.
    Can this socket be mounted outdoors?
    The socket has an IP44 protection class, but when mounting outdoors, direct rain, UV exposure, dust, and mechanical damage must be assessed. In open environments, additional protection may be required.
    Is the socket wall-mounted?
    Yes, it is an angled type socket designed for mounting on a wall or another suitable surface.
    Is a special plug required?
    Yes. A compatible 32 A, 230 V, 2P+PE, 6h type industrial plug is required.

    Reliable 230 V industrial connection point

    The IEK industrial angled socket allows for the installation of a tidy, convenient, and more robust 32 A 230 V electrical connection point in a technical, commercial, or industrial environment.

    Used with a compatible 2P+PE industrial plug, this socket becomes a practical solution for workshops, warehouses, agricultural buildings, and technical rooms where a more reliable electrical connection than a standard household socket is required.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

  • privacy policy

    Information