Rotary deflector D355 | ball bearings | 450×100 mm | painted steel | brown
Code: 28006Price 87.53 € VAT incl.( 72.34 € VAT excl. )Painted steel rotary deflector (wind turbine) D355 with ball bearings. Fits onto a D355 ventilation duct, extracts air without electricity and protects the duct from rain and snow.
-
Painted steel rotary deflector D355
A rotary deflector is a wind-turbine-type cap at the top of a ventilation duct. The wind spins the vaned head, creating negative pressure above the duct, so air is extracted from the rooms more effectively than through an open pipe. This model is designed for a D355 duct.
Key point
The head rotates on ball bearings – thanks to low friction it starts turning even in lighter wind, while the bearing wears less and runs more quietly. The brown paint coating applied to the steel adds colour and extra protection – the deflector matches brown roofing. The duct is protected from rain, snow and birds.
Connection diameterD355 mmMaterialPainted steelBearingsballColourBrown⚠ For ventilation only
The deflector is intended for ventilation ducts only – to extract humid and warm air. Do not install it on flues of stoves, fireplaces, sauna heaters or boilers: hot flue gases and acidic condensate will damage it, and there is a risk of fire and carbon monoxide (CO) poisoning.
How it works
- The deflector is fitted onto a D355 duct or pipe and fixed mechanically.
- The wind spins the head; centrifugal force and the pressure difference draw air out of the duct.
- Without wind the duct stays open – warm air rises by natural draught; as the wind picks up, extraction increases.
Estimated air extraction – D355
Wind speed 2 m/s 4 m/s 6 m/s Air extraction, m³/h 360 710 1070 Indicative estimate, not manufacturer data: actual flow depends on duct length and resistance, temperature difference and air supply to the room. Without wind, the duct works by natural draught.
Technical specifications
Product type Rotary deflector (wind turbine) for a ventilation duct Connection diameter D355 mm Dimensions (supplier data) 450×100 mm Material Painted steel Colour Brown Rotating assembly Ball bearings Power supply Not required – wind-driven Purpose Removal of ventilation (exhaust) air Not suitable for Smoke and combustion products – flues Manufacturer Elsp Group Which material to choose?
Material When to choose Deflector of this size Galvanised steel Houses, garages and outbuildings in a normal environment. D355 – view Painted steel Houses with brown or dark roofing, where appearance matters. this one Stainless steel Coastal areas, livestock farms, production sites, damp rooms – where galvanised steel would last less. D355 – view Where it is used
- Ventilation ducts of houses, cottages and homesteads
- Natural ventilation ducts of bathrooms, kitchens and basements
- Ventilation of attics and roof spaces
- Garages, workshops, storerooms
- Outbuildings and technical rooms
Installation diagram: common mistakes and the correct way
☝ Click the diagram to open an enlarged version.⚠ The diagram is for guidance only and may contain inaccuracies. Before installation, check it against the manufacturer's instructions and the roofing requirements.
Responsibility for installation lies with the qualified specialist performing it. UAB „Elektrotechnikos sprendimai“ is not liable for installation or possible errors.☝ Elsprendimai.eu recommends:- We do not have a separate base for this diameter – lead the duct through the roof with a tight seal (e.g. with a sheet-metal collar) or contact us and we will help you choose.
- All painted steel deflectors – in the subgroup.
✓ Pros
- Ball bearings – smooth rotation even in lighter wind
- Works without electricity, no running costs
- Protects the duct from rain, snow and birds
- Exact D355 size – no need to reduce the duct
- Same-size versions available in other materials
→ Limitations
- Most effective with at least a light wind (~2–3 m/s); without wind it acts as an open duct
- In winter the head may ice up and stop – the duct stays open for draught
- Not suitable for flues
⚠ Installation and maintenance
- The deflector D must match the duct D – do not reduce the duct.
- Install in an open spot, as close to the ridge as possible, not in the wind shadow of higher walls or trees.
- Fix with screws, rivets or a clamp; seal the joint with the roof using a UV-resistant sealant.
- Once a year check that the head rotates freely, without noise or wobble.
- Roof work is work at height: use fall protection equipment.
FAQ
Does the deflector need electricity?
No – it is driven by the wind and the natural draught of warm air.
Will it turn in light wind?
Ball bearings reduce friction, so the head starts turning even in lighter wind; with no wind at all, the duct works as an open one.
Will it freeze in winter?
In cold, damp weather the head may ice up and stop temporarily; the duct stays open, and once it thaws the head turns again. Do not cover the deflector for winter.
Can it be installed on a chimney?
No. This deflector is intended for ventilation ducts only; flues require dedicated chimney cowls.
Do the bearings need lubrication?
Normally not; once a year it is enough to check that the head rotates freely and does not squeak.
What does 450×100 in the name mean?
These are the product dimensions in millimetres according to supplier data; check the drawing and actual dimensions before installation.
In short
Painted steel rotary deflector D355 with ball bearings – natural ventilation without electricity for a D355 duct. Choose by duct diameter and, if needed, add a base of the same size. Unsure about the size or roofing? Send us the duct diameter and roof type – we will help you choose.
Phone: +370 620 72733
E-mail: info@elsprendimai.euIllustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.ManufacturerThis product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Inspection hatch door | 200x400x55mm | steel | RDL2040CSCode: 21360High-quality inspection doors designed for convenient and aesthetic access to engineering systems – water meters, valves, electrical or heating equipment. The sturdy steel body, resistant to corrosion, combined with a moisture-resistant gypsum board, allows for easy integration of the hatch into various types of walls and partitions. A modern adjustable tilt hinge ensures easy opening and closing of the doors with just a touch.
These doors can be finished with a variety of materials – tiles, stone, mirrors, or other decorative coatings – seamlessly blending into the overall interior design.
Price 41.12 € VAT incl.( 33.98 € VAT excl. )Decorative steel radiator grille | for 3-section cast iron radiator | 290×610×140 mm | white | DRG3Code: 36390Decorative steel grille for covering a 3-section cast iron radiator. Dimensions 290×610×140 mm (W×H×D), colour white, polymer coating.
The grille hides an old radiator and reduces the risk of direct contact with hot sections – important in children's rooms, kindergartens and schools. Before ordering, measure the radiator width including fittings, its height and its projection from the wall.
For a longer radiator, grilles can be combined side by side – sections add up, e.g. 10 sections = DRG5 + DRG5.
Fixings are not included. Side panels in the same colour (610×140 mm) are sold separately: side panel.
Price 31.46 € VAT incl.( 26.00 € VAT excl. )Flexible aluminum air duct | for ventilation | ventilation systems | D250mm | 3,15m | silver | LAO250UCode: 18723Flexible aluminum air duct - a reliable solution for various ventilation, air circulation and air extraction systems. Thanks to the 80 micron thick aluminum foil, the duct is durable, resistant to high temperature and maintains its shape even under demanding operating conditions.
The lightweight, flexible and easy-to-install duct is suitable for connecting fans, heat recovery systems, air extraction ducts, kitchen hoods and other ventilation components.
Price 13.61 € VAT incl.( 11.25 € VAT excl. )Inspection hatch-door with push-to-open mechanism | 400x500x15mm | aluminum profile | RDL4050BCode: 12120Inspection doors-hatch are designed to conveniently and aesthetically conceal access to utility systems such as water meters, valves, electrical installations, or ventilation equipment. Made from durable aluminum profile and filled with moisture-resistant plasterboard, these doors are not only long-lasting but also adaptable to any interior – they can be painted or decorated along with the wall. The doors open and close with a push mechanism, so no additional handles or locks are needed for installation. Perfect for mounting in plasterboard walls or partitions where frequent access to hidden components is required.
Price 69.41 € VAT incl.( 57.36 € VAT excl. )Supply air ventilation damper in wall | with G3 filter | ASA plastic outdoor grille | D125 | 0,5m | white | 12,5TOVCode: 09452Wall-mounted supply air vent D125 with a 500 mm insulated duct, G3 filter and adjustable diffuser. Outdoor side – ASA plastic outdoor grille. Intended for controlled air inflow in rooms with forced exhaust.
Price 33.58 € VAT incl.( 27.75 € VAT excl. )Radial scroll-housing fan | steel | 230V | D120 | 116×205×173mm | silver | Turbo Classic SI 120 2P | 4772318404057Code: 03051Radial scroll-housing fan Turbo Classic SI 120 2P: 230 V, up to 395 m³/h, Ø120 mm connection, steel housing IP44. For local supply, extraction and cooling.
Price 177.54 € VAT incl.( 146.73 € VAT excl. )































