Products catalog

  • Lighting control unit MyLux | 0–10 V | IP55 | Coolibrì | F92450

    Code: F92450

    Lighting control unit MyLux F92450: 0–10 V | IP55, Coolibrì.

  • Lighting control unit MyLux | 0–10 V | IP55 | Coolibrì | F92450

    Coolibrì control unit for lighting systems: automatic or manual light intensity control via a 0–10 V signal.

    Key point:
    Controls photoperiod luminaires – light and dark cycles in livestock buildings.
    Control
    0–10 V
    Modes
    auto / manual
    Protection
    IP55
    Country of origin
    Italy

    We will help you select and match the system

    We will advise which Coolibrì fans, control units and accessories suit your site and explain how to combine them into one system.

    Contact us: tel. +370 658 01033 or e-mail info@elsprendimai.eu

    In your email briefly describe the site: purpose, floor area and height, existing equipment and what you want to control.

    Wholesale quantities: special prices for larger orders. State the required quantity in your e-mail and we will send you an individual offer.

    Operating principle

    The unit adjusts luminaire intensity via a 0–10 V signal according to a set programme or manually.

    Parameters are set on the front panel; sensors connect to the unit inputs.

    What does this product offer?
    Automatic fan control based on real conditions.

    Technical specifications

    Product type Lighting control unit MyLux
    Code F92450
    Controlled zones lighting zone(s), see note
    Control 0–10 V analogue
    Modes automatic / manual
    Display LCD
    Power supply 220 V, 50 Hz
    Protection IP55
    Country of origin Italy

    Main functions

    • Light control – 0–10 V dimming.
    • Automatic mode – By programme.
    • Manual mode – Intensity by hand.
    • IP55 – Suitable for farms.

    Where is it used?

    • Livestock farms
    • Production halls
    • Warehouses
    • Sports halls
    • Greenhouses

    Use by need

    For farms.
    Automatic ventilation by temperature.
    For installers.
    Simple 0–10 V connection.
    For businesses.
    Less manual work and energy.

    Practical application

    Install the temperature probe in a representative spot, away from direct sunlight and heat sources.

    Pros

    • 0–10 V
    • Auto / manual
    • LCD display
    • IP55

    Cons / limitations

    • Requires a 0–10 V controlled fan or inverter
    • Connection by a qualified electrician
    • Additional sensors sold separately

    Safety and installation notes

    • Connection must be made by a qualified specialist
    • Fit overload protection in the supply circuit
    • Mount the fan on a solid base
    • Disconnect power before maintenance
    • Keep inlet and outlet unobstructed

    Quick selection guide

    0–10 V
    auto / manual
    IP55
    Italy
    Suitable when you need:
    • control photoperiod luminaires
    • automate lighting
    • reduce lighting costs
    Check before use:
    • how many zones need control
    • whether fans accept 0–10 V
    • which sensors are needed
    Important reminder: Choose accessories and control equipment according to the specific fan model and power.

    FAQ

    How many zones does it control?
    The old description states 1 zone, the manufacturer states 2 independent – we will confirm when ordering.
    Which luminaires does it control?
    0–10 V dimmable ones, e.g. Coolibrì photoperiod LEDs.
    Is there a manual mode?
    Yes.

    F92450 lighting control unit mylux 0–10 V | IP55

    Lighting control unit MyLux F92450: 0–10 V | IP55, Coolibrì.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Subscribtion to new arrivals

    privacy policy

    Information