
Cable 4x6 | copper | flexible | round | BVV-F 4G6 | 1 m | white
Code: BVV-F 4G6Price 4.41 € VAT incl.( 3.65 € VAT excl. )- Round flexible cable for connecting electrical appliances and equipment.
- Manufacturer AB Lietkabelis, DoP LK-DoP 07/006/LT, Eca.
- Minimum order quantity – 10 m.
-
Cable 4x6 | copper | flexible | round | BVV-F 4G6 | 1 m | white
BVV-F 4G6 – round flexible copper cable with PVC insulation and PVC sheath, 300/500 V: 4 cores of 6 mm², L1, L2, L3 and PE (green-yellow). Manufacturer – AB Lietkabelis.
Main idea
Round flexible cable for connecting electrical appliances and equipment. Class 5 flexible conductors are easy to terminate, but the cable is not intended for continuously moving circuits, laying in soil or water, or long-term direct UV exposure.Technical specifications
Cable type BVV-F (OMY, OWY) Cores 4G6 (4 × 6 mm²) Core functions L1, L2, L3 and PE (green-yellow) Conductor Annealed copper, class 5 (flexible) per EN 60228 Insulation / sheath PVC (TI1/TI2) / PVC (TM2) Rated voltage U₀/U 300/500 V Test voltage 2 kV Max. conductor temperature +70 °C; +160 °C during short circuit Installation temperature −5…+40 °C Operating temperature −15…+70 °C Outer diameter 13.08 mm Insulation thickness 0.8 mm Sheath thickness 0.9 mm Approx. weight ≈ 343 kg/km Conductor resistance at +20 °C, max. 3.30 Ω/km Minimum bending radius > 5 × cable thickness Reaction to fire class Eca Declaration of Performance LK-DoP 07/006/LT Sheath colour white Sales unit 1 m (minimum order – 10 m) Applications
- Connecting three-phase equipment without neutral: motors, heaters, pumps (L1, L2, L3, PE).
- Flexible three-phase supply leads between the panel and the equipment.
- Equipment connection in dry and damp indoor rooms.
Advantages
- Class 5 flexible conductors – easy to route and connect to equipment terminals.
- Copper conductors, PVC insulation and sheath, 300/500 V, tested at 2 kV.
- Reaction to fire class Eca, DoP LK-DoP 07/006/LT; made in Lithuania.
What to check
- Current-carrying capacity depends on installation method, temperature and grouping – select the circuit breaker for the whole circuit, not by cross-section alone.
- Not suitable for laying in soil or water; a PVC sheath is not proof of UV resistance.
- A flexible conductor does not mean suitability for continuous flexing cycles – use a dedicated cable for moving parts.
⚡ Safe installation
- Terminate flexible conductors with ferrules of the correct size when the terminal manufacturer requires it.
- Provide strain relief – pulling forces must not act on the terminals. The green-yellow core is for PE only.
- Installation must be carried out by a qualified electrician in accordance with HD 60364 and the project.
How to choose
Other variants in this group: BVV-F 2×6 · BVV-F 3G6 · BVV-F 5G6 · BVV-PL 2×1.5 · BVV-PL 2×2.5
Full comparison, load and voltage-drop tables and the sidebar filter are in the BVV-F and BVV-PL selection guide. Open the selection guide →Frequently asked questions
Can BVV-F be buried in plaster instead of an installation cable?
BVV-F is intended for connecting appliances and equipment. For fixed installation under plaster choose a dedicated cable, e.g. BVV-PL or BVV-P.Does 6 mm² always suit a 32 A circuit breaker?
Not always. Current-carrying capacity depends on the installation method, ambient temperature and grouping – this must be assessed by an electrician.Cable 4x6 | copper | flexible | round | BVV-F 4G6 | 1 m | white
Flexible round copper cable 4 × 6 mm², 300/500 V, class 5 conductors, Eca. Sold by the metre, minimum order – 10 m.
Published: 2026-11-16 · Data verified against the AB Lietkabelis manufacturer datasheet: 2026-11-16
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.ManufacturerSingle-core wires are also called monolithic wires,
while multi-core wires are flexible wires.Wires usually have a single conductor covered with an insulating layer.
Cables have several insulated wires, covered with a common sheath.
Conductor properties of wires:
The resistance of copper conductors is lower (0.017Ω) than that of aluminum (0.028Ω),
but copper has better conductivity.
Copper has better electrical and thermal conductivity than aluminum.
Copper wires are more flexible, more resistant to corrosion, and more durable.
Aluminum wires quickly oxidize upon contact with air, forming a film that weakens the contact.
Copper wires carry higher currents than aluminum wires.
Copper conductors are denser than aluminum. Therefore, copper wire is heavier.The cross-sectional area of wires is chosen according to the power of specific equipment,
for example: for a 1kW load, a 1.57 mm² cross-sectional area of the conductor is required.
For aluminum wires: 5A per 1mm², and for copper wires: 8A per 1mm².This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Cable sheath and wire stripper 0.2–4.0 mm² | ErgoStrip KNIPEXCode: 169501SBKNIPEX high-quality, ergonomically designed wire and cable stripping tool for fast, precise, and safe work. This stripping knife is highly favored by professional electricians for its versatility, durability, and practical design. Suitable for removing insulation from both signal and power wires, as well as for installation, data, and coaxial cables.
Perfectly suited for use on construction sites and in domestic installations, especially where wires need to be quickly and accurately prepared for connection in confined spaces.
Price 48.40 € VAT incl.( 40.00 € VAT excl. )






