Products catalog

  • Copper PV interconnect ribbon | 1.2 × 0.20 mm | solder coated | 1 m | Sunwire Luvata

    Code: 1.2x0.20mm

    Copper Sunwire ribbon for electrical interconnection of photovoltaic cells.

    Price per 1 m.

  • Copper PV interconnect ribbon | 1.2 × 0.20 mm | solder coated | 1 m | Sunwire Luvata

    Luvata Sunwire is a flat copper ribbon with a solderable coating used to electrically connect solar cells and collect current in photovoltaic modules. Nominal dimensions – 1.2 × 0.20 mm, price per 1 m.

    Key point:
    Inside a solar module, cells are connected not with wires but with thin solder-coated copper ribbons. Such ribbon is needed for module repair, for making test or training modules and wherever a flat conductor must be soldered to a cell busbar.
    Dimensions
    1.2 × 0.20 mm
    Material
    Copper with solder coating
    Purpose
    Solar cell interconnection
    Sales unit
    1 m

    How it works

    The ribbon is soldered to the cell busbar and connects the front of one cell to the back of the next – this connects the cells in series.

    The coating provides the solder needed for the joint and protects the copper from oxidation. When heated, the coating melts and bonds to the cell metallisation.

    The result is a flat, low-resistance connection that fits between cells and lamination layers.

    Why choose Sunwire ribbon?
    A dedicated PV interconnect ribbon from a manufacturer serving module production – not a generic copper strip. The flat profile allows it to be laminated inside the module.

    Technical specifications

    Product type Photovoltaic interconnect (tabbing) ribbon
    Manufacturer Luvata
    Series Sunwire
    Product code 1.2x0.20mm
    Nominal dimensions 1.2 × 0.20 mm
    Material Copper with solderable coating
    Purpose Interconnecting solar cells and collecting current
    Sales unit 1 m

    Main features

    • Flat copper profile – low resistance and fits between cells and lamination layers.
    • Solder coating – no need to tin the ribbon before soldering.
    • Oxidation protection – the coating protects the copper during storage.
    • 1.2 mm width – suits narrow cell busbars.
    • Sold by the metre – buy only as much as needed for repair or testing.

    Where is it used?

    • Solar module repair – restoring broken connections
    • Test and training modules
    • Small self-built modules
    • Laboratory and prototype work
    • Connecting cells into small strings
    • Vocational training in PV technology

    Use by need

    For module repair specialists.
    Ribbon of the right profile to restore a broken cell connection.
    For training institutions.
    Material for assembling demonstration PV modules.
    For makers / enthusiasts.
    A way to connect solar cells in your own prototype.

    Practical example

    If a cell connection breaks in a small module, expose the damaged area, clean the busbar, place a piece of Sunwire ribbon of the required length and solder it with a temperature-controlled iron and flux. After repair the area must be re-sealed, otherwise moisture will damage the joint.

    Pros

    • Dedicated PV ribbon from the Luvata Sunwire series
    • Flat, low-resistance profile
    • Solder coated
    • Suitable for repair and prototypes
    • Sold by the metre

    Cons / limitations

    • Coating composition and thickness must be checked in the product documentation
    • Soldering requires a temperature-controlled iron and flux
    • Not intended for replacing cables or external connections
    • The repaired area of the module must be re-sealed

    Safety and installation notes

    • Disconnect and cover the module before repair – it generates voltage in daylight.
    • Choose the soldering temperature according to coating and cell manufacturer recommendations – an overheated cell cracks.
    • Work in a well-ventilated area and wear safety glasses.
    • Clean flux residues after soldering.

    Quick selection guide

    1.2 × 0.20 mm
    Copper + coating
    Cell interconnection
    Luvata Sunwire
    1 m
    Suitable when you need:
    • connecting solar cells
    • repairing an internal module connection
    • a demonstration or test module
    Check before use:
    • cell busbar width
    • coating type and soldering temperature
    • required length
    Important reminder: the ribbon is for cell connections inside the module – it does not replace PV cable or MC4 connectors.

    FAQ

    How is it sold?
    By the metre – price per 1 m.
    What are the dimensions?
    1.2 × 0.20 mm.
    Does it need tinning?
    No – the ribbon already has a solderable coating.
    What is the coating composition?
    Check the exact coating composition and thickness in the product documentation.
    Is it suitable for module repair?
    Yes, for restoring cell connections.
    Can it be used to connect cables?
    No – use PV cable and MC4 connectors for cables.

    Copper PV interconnect ribbon | 1.2 × 0.20 mm | solder coated | 1 m | Sunwire Luvata

    Luvata Sunwire – 1.2 × 0.20 mm copper PV interconnect ribbon with solder coating, sold by the metre. For connecting solar cells in module repair, prototypes and training modules.

    Published: 2026-11-17 · Data verified against manufacturer / supplier information: 2026-11-17

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

  • privacy policy

    Information