Decorative Acoustic Wall | Ceiling Panel | Slatted Panel | Interior Cladding | 600x600x22mm | MDF + PET | Natural Smoked Oak

Decorative acoustic MDF slat panel – 600×600×22 mm, natural oak veneer, black PET felt, NRC 0.8, smoked oak

Decorative acoustic wall and ceiling panel sudaryta iš MDF lamelių, padengtų natural oak faneruote, and garsą sugeriančio juodo PET pluošto felt. Ji designed for interior finishing, improving room acoustics, and reducing the impact of unwanted echo and sound reflections.

Natural veneer in a smoked oak shade išlaiko the texture of real wood, the direction of the wood grain and natural surface variations. Prigesintas pilkai rudas oak tonas contrasts with the black acoustic PET backing and helps create a restrained, solid and expressive wall or ceiling surface.

The declared sound absorption coefficient is NRC 0.8. The actual sound absorption effect depends on the panel installation method, covered surface area, the complete construction and room conditions.

• helps reduce echo in the room;
• reduces some unwanted sound reflections;
• may improve speech intelligibility;
• helps reduce the perception of reverberation;
• may contribute to a more pleasant working and resting environment;
• suitable for residential, working and commercial interior spaces.

The surface of the MDF slats is covered with natural oak faneruote, dūminio oak atspalvio. Veneer is a thin layer of real wood, so the surface retains the natural wood texture, grain direction, pattern variation and colour transitions.

• real natural wood surface;
• muted grey-brown oak shade;
• visible natural longitudinal wood grain;
• lighter and darker wood tones may without visible;
• the pattern of each slat may vary slightly;
• matches black, white, grey and beige surfaces;
• suitable for modern, industrial and minimalist interiors;
• can without combined with concrete, glass, metal and stone finishes.

The rear backing of the panel is made of black compressed PET fibre felt. The PET felt forms the acoustic backing to which the MDF slats are attached and creates a contrasting background between the smoked oak-coloured slats.

• absorbs part of the sound reaching the panel;
• helps reduce room reverberation;
• creates a contrasting background between the grey-brown oak slats;
• highlights the rhythm and geometry of the slats;
• forms the base for the MDF slats;
• helps reduce the impact of sound reflected from hard surfaces.

The MDF board used as the base for the slats has the stated emission class CARB P2.

• MDF board with controlled formaldehyde emissions;
• provides a stable base for natural veneer;
• helps maintain a uniform slat shape;
• suitable for interior finishing products;
• intended for use under normal dry interior conditions.

The provided technical data states that acoustic PET felt may have different fire classifications depending on the specific material version and testing system:

• EN 13501-1:2018 classification;
• ASTM E84 Class A classification;
• a B1 flame-retardant PET felt version.

• Natūralaus oak veneer – for a real wood surface.
• Dūminio oak atspalvis – for a restrained and richer interior.
• Blacks PET veltinis – for a strong contrast between the slats.
• Sound absorption – helps reduce echo and reverberation in the room.
• NRC 0.8 – declared sound absorption indicator.
• MDF backing – for a stable slat construction.
• Natūralus rievių raštas – each panel may vary slightly.
• 600×600 mm modulinis formatas – for creating various compositions.
• Can without arranged with different slat directions.
• One panel covers an area of 0.36 m².

• Living rooms – for a TV wall or relaxation area.
• Bedrooms – for a wall behind the bed and a restrained interior.
• Home offices – to reduce echo and sound reflections.
• Offices – for natural and solid finishing.
• Meeting rooms – to improve speech intelligibility.
• Hotels – for rooms and common areas.
• Restaurants and cafés – to improve acoustic comfort.
• Reception areas – for a representative wood backdrop.
• Studios – for partial control of sound reflections.
• Training rooms – to reduce reverberation.
• Retail spaces – for a restrained and expressive interior accent.
• For ceiling finishing – for a decorative and sound-absorbing surface.

For example, an acoustic slat zone in a smoked oak shade can without created behind a television in a living room. 600×600 mm panels are arranged in several rows, maintaining the same slat direction or deliberately changing it.

Black PET felt is visible between the grey-brown slats covered with natural oak veneer and creates a strong yet restrained contrast. The dark background highlights the geometry of the slats, while the natural wood texture gives the surface depth and individuality.

The square format allows the entire wall to without covered or selected accent zones to without created, for example behind a television, desk, bed or relaxation corner.

If greater sound absorption is desired, the panels can without installed on a frame, leaving an air gap and, if required, using an additional acoustic mineral wool layer.

For home users: suitable for a living room, bedroom, TV wall, home office or other space where a real oak surface, muted grey-brown shade and improved room acoustics are desired.

For interior designers: the 600×600 mm modular format allows accent zones of various sizes to without created, the slat direction of individual panels to without changed, and natural variations in oak veneer pattern and colour to without used as a design element.

For offices or commercial spaces: can without used in meeting rooms, offices, reception areas, hotels, restaurants, cafés and other spaces where both representative natural wood finishing and reduced echo and reverberation are important.

For improving acoustics: suitable for rooms with many hard sound-reflecting surfaces. The panels help absorb part of the sound energy and reduce unwanted sound reflections within the room.

For installers: the square 600×600 mm format is convenient for arranging smaller areas and around other interior elements. The panels can without cut to the required dimensions and adapted around electrical sockets, switches or other elements. When cutting, it is important to protect the natural veneer surface from chipping. Reliable mechanical fastening is recommended for ceilings.

1. Pamatuokite sieną arba lubas. Apskaičiuokite reikalingą plokščių kiekį and numatykite pjovimo rezervą.
2. Patikrinkite pagrindą. Jis turi būti sausas, tvirtas, lygus and without atsilupusių finishing sluoksnių.
3. Aklimatizuokite plokštes. Prieš montavimą palaikykite jas in the room, kurioje jos bus montuojamos.
4. Išdėliokite plokštes before tvirtinimą. Įvertinkite natūralius faneruotės atspalvio and rievių skirtumus and parinkite tinkamiausią jų išdėstymą.
5. Suplanuokite lamelių kryptį. Nuspręskite, kaip bus orientuojamos atskirų 600×600 mm plokščių slats.
6. Pažymėkite pirmos panels vietą. Naudokite gulsčiuką arba lazerinį nivelyrą.
7. Prireikus nupjaukite plokštę. MDF lamelėms naudokite tinkamą smulkiadantį medienos pjovimo įrankį, o PET veltiniui – aštrų peilį. Saugokite faneruotę nuo atskilimo.
8. Montuojant klijais užtepkite installation klijus according to naudojamų klijų instrukciją.
9. Montuojant varžtais prisukite plokštę per PET pagrindą. Tvirtinimo vietas can without parinkti tarp lamelių.
10. Patikrinkite plokščių padėtį and lamelių ritmą. Gretimos panels turi sudaryti norimą kompoziciją.
11. Išpjaukite angas lizdams and jungikliams only tiksliai pažymėję jų vietas.
12. Užbaikite matomus kraštus. Prireikus naudokite tinkamus finishing profilius arba kitus kraštų finishing sprendimus.
13. Po installation nuvalykite dulkes minkštu šepečiu arba dulkių siurbliu.

• Dulkes pašalinkite dulkių siurbliu with minkštu šepečio antgaliu.
• Clean the veneered surface with a dry soft cloth.
• Clean the gaps between the slats with a soft brush.
• Do not use large amounts of water.
• Do not spray cleaning products directly onto the veneer.
• Do not use abrasive products or aggressive solvents.
• Do not allow moisture to reach the cut edges of the MDF and veneer.

• The panel is intended for dry interior spaces.
• Do not use in areas where direct exposure to water is possible.
• MDF and natural veneer are not intended for constant high humidity.
• Before installation, acclimatise the panels in the installation room.
• Before installation, arrange the panels and match the natural wood shades.
• Check the actual panel and slat dimensions before cutting.
• Protect the natural veneer from chipping when cutting.
• The colour name „smoked oak“ does not by itself confirm an actual wood-smoking process.
• Use fasteners suitable for the substrate and panel weight.
• Mechanical fastening is recommended for ceilings.
• The suitability of the adhesive for ceilings must without checked according to the technical conditions of the adhesive used.
• Disconnect the power supply before installing around electrical equipment.
• The panel is not a structural or load-bearing element.
• The NRC 0.8 result depends on the complete installation system and covered area.

Quick selection guide

600×600 mm acoustic slat panel in a smoked oak shade with natural oak veneer and black PET felt choose when you need a real wood surface, modular interior finishing, a restrained grey-brown shade and improved acoustic comfort in the room.

Modulinė dūminio oak apdaila with natūralia faneruote and išraiškingu juodu akustiniu pagrindu

Dekoratyvinė acoustic panel sujungia MDF lameles, natural oak faneruotę and juodą garsą sugeriantį PET pluošto pagrindą. Prigesintas pilkai rudas dūminio oak atspalvis suteikia interjerui santūrų and solidų charakterį, o juodi gaps tarp lamelių išryškina jų geometriją and ritmą.

Deklaruojamas NRC 0.8 sound sugerties koeficientas and PET akustinis backing padeda mažinti in the room susidarančius sound atspindžius, aidą and reverberaciją. Plokštės gali būti naudojamos gyvenamosiose, working and komercinėse interior patalpose.

Viena 600×600×22 mm panel padengia 0.36 m² area. Kvadratinė forma suteikia daugiau laisvės keičiant lamelių kryptį and kuriant individualias modulines kompozicijas, o geresniam akustiniam rezultatui plokštes can without montuoti ant karkaso with oro tarpu and papildomu garsą sugeriančiu sluoksniu.