Products catalog

  • Digital voltage control relay with Schuko socket | 16A | 220-240V

    Code: ES-TVPS-16E

    Voltage control relay is an automatic voltage protection device with an EU Schuko socket, designed to protect household electrical appliances from overvoltage, undervoltage and voltage surges. The device can automatically disconnect the power supply when dangerous voltage is detected in the electrical network and restore power after the set delay time. 

  • Automatic voltage protector with socket – AC 220–240V, 16A, 3000W, EU Schuko, adjustable overvoltage and undervoltage protection

    Automatic Voltage Protector – an automatic voltage protector with EU Schuko socket, designed to protect household electrical appliances from overvoltage, undervoltage and voltage surges. The device can automatically disconnect power when dangerous voltage is detected in the electrical network and restore power after the set delay time.

    Main idea:
    This voltage protector is designed to protect refrigerators, household appliances, lighting, decorations and other indoor electrical equipment from dangerous mains voltage fluctuations. It is a simple solution when additional protection is needed directly at the power socket.
    Current
    up to 16A
    Power
    up to 3000W
    Voltage
    220–240V AC
    Socket
    EU Schuko with safety shutter

    Operating principle

    The voltage protector is plugged directly into a wall socket, and the protected appliance is connected to the device’s Schuko socket. The device monitors the mains voltage and automatically disconnects power when overvoltage or undervoltage is detected.

    When the voltage returns to a safe range, power is restored after the set recovery time. The recovery time is adjustable from 5 to 999 seconds, allowing the protection to be adapted to different appliances, such as a refrigerator or other household equipment.

    Why is automatic voltage protection useful?
    It helps reduce the risk of household appliances being damaged by excessively high or low mains voltage. This is especially relevant for refrigerators, freezers, compressor-based appliances, lighting, electronics and other equipment sensitive to voltage fluctuations.

    Technical parameters

    Product type Voltage protector with socket / voltage protector
    Rated voltage AC 220–240V
    Frequency 50Hz / 60Hz
    Maximum current 16A
    Maximum load up to 3000W
    Socket type EU Schuko socket
    Socket protection Socket with safety shutter, protection against accidental contact
    Display LED voltage display
    Control On/Off button, adjustable settings
    Recovery function Automatic power recovery after the set time
    Housing material Flame-retardant PC material
    Contacts High-conductivity copper plate with nickel plating
    Dimensions 101 x 53 x 72.5 mm

    Protection and adjustment functions

    Overvoltage protection 230–300V adjustable, default 260V
    Undervoltage protection 140–210V adjustable, default 175V
    Recovery time 5–999 s adjustable, default 10 s
    Voltage correction from -20V to +20V
    Voltage surge protection Yes, designed for household appliance protection
    Working voltage display Yes, on LED display
    Manual On / Off On/Off button can be pressed during power-on or recovery time

    Where is it used?

    • For refrigerators and freezers – protection against dangerous voltage fluctuations and improper restart.
    • For household appliances – washing machines, dishwashers, microwave ovens, kitchen equipment and more.
    • For lighting – LED lights, lamps and other indoor lighting equipment.
    • For holiday decorations – string lights, decorative lighting and seasonal electrical equipment.
    • For indoor electrical equipment – various 220–240V devices that require additional voltage protection.

    Practical use example

    For example, a refrigerator is connected through this voltage protector. If the mains voltage becomes too high or too low, the device automatically disconnects power and protects the refrigerator electronics and compressor from possible damage.

    When the mains voltage becomes safe again, the device automatically restores power after the set recovery time. This helps avoid sudden and frequent restarting of the appliance after electrical faults.

    Use according to need

    For household users: a simple way to protect a refrigerator, freezer, lighting or another everyday appliance from voltage fluctuations.

    For households: suitable in places where the electrical network is unstable and voltage drops, overvoltages or power supply disturbances occur frequently.

    For electricians: a practical solution to offer customers as additional individual appliance protection without complex installation in the electrical panel.

    Pros

    • Adjustable overvoltage protection – 230–300V limit can be set.
    • Adjustable undervoltage protection – 140–210V limit can be set.
    • Adjustable recovery time – 5–999 s range allows adaptation to different appliances.
    • LED display – convenient for viewing the working voltage.
    • EU Schuko socket with safety shutter – additional protection against accidental contact.
    • Flame-retardant PC housing – strong and safer construction.
    • Nickel-plated copper contacts – better conductivity, lower heating and rust resistance.
    • Easy to use – no panel installation required, simply plug it into a socket.

    Cons / limitations

    • Designed for indoor use – not recommended outdoors or in damp rooms without additional protection.
    • Limited load – 16A and 3000W load must not be exceeded.
    • Does not protect against all electrical faults – does not replace a circuit breaker, RCD or other mandatory protections.
    • Suitable only for one connected appliance or limited load – not suitable for protecting the entire house supply.
    • Limits must be set correctly – incorrect settings may disconnect power too often or provide insufficient protection.

    Safety and usage notes

    This voltage protector is a plug-in protection device designed to protect household electrical appliances from voltage fluctuations. It must be used according to the permitted current, power and voltage parameters.

    • Do not exceed 16A and 3000W load.
    • Use only in a suitable 220–240V network.
    • Do not use in damp places if there is no additional IP protection.
    • Do not connect several high-power appliances through one protector.
    • Before use, set suitable overvoltage and undervoltage limits.
    • The device does not replace electrical installation protections – circuit breakers, RCD/RCBO or grounding.
    • If the device frequently disconnects power, the condition of the electrical network should be checked or an electrician should be contacted.

    Quick selection guide

    Choose the automatic voltage protector with socket when you need a simple way to protect one household appliance or a limited 220–240V load from overvoltage, undervoltage and voltage surges.

    Voltage
    220–240V AC
    Current
    16A
    Power
    up to 3000W
    Socket
    EU Schuko
    Suitable when you need to:
    • protect a refrigerator, freezer or another household appliance;
    • monitor the working voltage on an LED display;
    • have adjustable overvoltage and undervoltage protection;
    • set a power recovery delay after an electrical fault;
    • use simple protection without installation in an electrical panel.
    Check before use:
    • whether the connected appliance power does not exceed 3000W;
    • whether the current does not exceed 16A;
    • whether suitable 220–240V AC voltage is used;
    • whether suitable overvoltage and undervoltage limits are set;
    • whether the device is used in a dry indoor environment.
    Important reminder:
    This voltage protector is designed for individual appliance protection. It does not replace full electrical installation protection in the panel, so proper circuit breakers, RCD/RCBO, grounding and other protection measures must be used for house or facility protection.

    FAQ – frequently asked questions

    What is this voltage protector used for?
    It is designed to protect household electrical appliances from overvoltage, undervoltage and voltage surges.
    Is it suitable for a refrigerator?
    Yes, this protector can be used to protect a refrigerator or freezer from dangerous voltage fluctuations.
    What is the maximum load?
    The maximum load is up to 16A and up to 3000W.
    Can the protection limits be adjusted?
    Yes. The overvoltage limit is adjustable from 230–300V, the undervoltage limit from 140–210V, and the recovery time can also be adjusted.
    Does the device restore power automatically?
    Yes. When the voltage returns to a safe range, power is restored after the set recovery time.
    Is this protector suitable for the whole house?
    No. This is a plug-in protector for one appliance or a limited load. For whole-house protection, panel-mounted protection devices are required.

    Automatic voltage protector with EU Schuko socket for household appliances

    This automatic voltage protector with socket is a practical solution for protecting household electrical appliances from overvoltage, undervoltage and voltage surges. It can automatically disconnect power when the voltage becomes dangerous and restore it after the set delay.

    With 16A current, up to 3000W load, LED display, adjustable protection limits, EU Schuko socket with safety shutter, flame-retardant PC housing and automatic recovery function, this protector is suitable for refrigerators, freezers, lighting, household appliances and other indoor electrical equipment.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

  • Subscribtion to new arrivals

    privacy policy

    Information