Products catalog

  • Digital weekly time switch | LCD | 16 A | 220–240 V AC | 1 CO | 3-year reserve | DIN 2 modules | OURTOP ATHC15A

    Code: ATHC15A

    Programmable DIN-rail weekly time switch: memory for 90 on/off programs, pulse programs and a 3-year time reserve during power loss.

  • Digital weekly time switch | LCD | 16 A | 220–240 V AC | 1 CO | 3-year reserve | DIN 2 modules | OURTOP ATHC15A

    Programmable DIN-rail weekly time switch: memory for 90 on/off programs, pulse programs and a 3-year time reserve during power loss. Changeover contact 16 A / 250 V AC (cos φ = 1).

    Key point:
    A dependable way to switch equipment on a daily and weekly schedule without internet or apps. ATHC15A keeps time for up to 3 years during a power cut, and pulse programs suit school bells too.
    Contact rating
    16 A / 250 V AC, 1 CO
    Programs
    90 on/off
    Power reserve
    3 years
    Mounting
    DIN 2 modules

    Operating principle

    The timer mounts on a 35 mm DIN rail (2 modules, 36 mm), is powered with 220–240 V AC, and the load is connected through a 16 A changeover contact.

    The memory holds 90 on/off programs and 44 pulse programs (22 pulses); the minimum interval is 1 min and pulses start from 1 s.

    Accuracy is ≤ 2 s per day (25 °C), and during a power cut the clock runs on its reserve for up to 3 years, so the schedule is not lost.

    Why choose ATHC15A?
    Many programs, short pulses and a long time reserve – one timer covers lighting, school bells and sites with frequent power cuts.

    Technical specifications

    Product typeDigital weekly time switch
    Manufacturer / modelOURTOP ATHC15A
    Supply voltage220–240 V AC, 50/60 Hz
    Contact rating16 A / 250 V AC (cos φ = 1), 10 A (cos φ = 0,6), 1 CO
    Programs90 on/off programs, 44 pulse (22 pulses)
    Minimum interval1 min (pulse 1 s)
    Accuracy≤ 2 s / 24 h (25 °C)
    Power reserve3 years
    Incandescent lamp load2300 W
    Own consumption≤ 5 VA
    DisplayLCD
    MountingDIN 35 mm, 2 modules (36 mm)
    MarkingCE

    Key functions

    • 90 on/off programs – complex weekly schedules.
    • Pulse programs – 44 programs, 22 pulses from 1 s.
    • 3-year time reserve – the schedule survives power cuts.
    • 16 A changeover contact – NO or NC as needed.
    • Accurate time – ≤ 2 s per day.
    • LCD display – programs clearly visible.

    Where is it used?

    • Outdoor and advertising lighting
    • School and factory bells
    • Heating and ventilation schedules
    • Irrigation and pumps
    • Shops and offices by working hours
    • Sites with frequent power cuts

    Use by need

    For schools and businesses.
    Pulse programs automate bells without a separate controller.
    For the electrician.
    A dependable timer without apps – the customer does not depend on internet.
    For the building manager.
    The 3-year reserve means the schedule need not be reset after a power cut.

    Practical example

    If a school bell must ring for a few seconds according to the lesson timetable on weekdays only, ATHC15A pulse programs do it on their own, and the time is not lost in a power cut.

    Advantages

    • 90 programs and pulse modes
    • 3-year time reserve
    • 16 A changeover contact
    • Accuracy ≤ 2 s per day
    • Low own consumption (≤ 5 VA)

    Limitations

    • No remote control via app
    • Takes 2 DIN modules
    • Inductive load (cos φ = 0.6) only 10 A
    • Supply 220–240 V AC only
    • No overload or short-circuit protection – a circuit breaker is required

    Safety and installation notes

    • Install only with the power disconnected; work in the panel must be done by a qualified electrician.
    • Protect the supply and load circuits with a circuit breaker selected for the cable and load.
    • Do not exceed 16 A (cos φ = 1), 10 A (cos φ = 0.6) or 2300 W of incandescent lamps.
    • Use an intermediate contactor for motors and high-inrush loads.

    Quick selection guide

    16 A, 1 CO
    220–240 V AC
    90 programs
    3-yr reserve
    DIN 36 mm
    Suitable when you need:
    • Complex weekly schedules without internet
    • Short pulses (bells, signals)
    • The schedule to survive power cuts
    Check before use:
    • Load current and type (resistive / inductive)
    • That there are 2 free modules in the panel
    • Supply is 220–240 V AC
    Important: ATHC15A switches the circuit by time but is not a protective device and does not replace a circuit breaker.

    FAQ

    How many programs can be set?
    90 on/off and 44 pulse programs.
    What happens during a power cut?
    The clock runs on its reserve for up to 3 years and programs are kept.
    What is the shortest pulse?
    1 second; the minimum normal interval is 1 min.
    What load can be connected?
    16 A (cos φ = 1), 10 A (cos φ = 0.6), incandescent lamps up to 2300 W.
    How much panel space does it take?
    2 DIN modules (36 mm).
    Is internet required?
    No, the timer works stand-alone.

    Digital weekly time switch | LCD | 16 A | 220–240 V AC | 1 CO | 3-year reserve | DIN 2 modules | OURTOP ATHC15A

    ATHC15A is a digital weekly DIN-rail timer with 90 programs, pulse modes, a 3-year time reserve and a 16 A changeover contact. Suitable for lighting, school bells, heating and irrigation.

    Published: 2026-11-19 · Data verified against the manufacturer specification: 2026-11-19

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • privacy policy

    Information