Directional speaker | for 5 mm magnetic track | with Bluetooth | 10W | 2448VDC | Ø65x75mm | black
Code: ES-HS-UN5The 5 mm magnetic system Bluetooth speaker is designed to integrate background music into modern magnetic track lighting systems. The device operates on a DC 24–48V power supply, supports Bluetooth 5.4, delivers 10 W of output power, and can operate as either a Host or Sub Unit, allowing multiple speakers to be connected into a single wireless audio system without additional audio cables. It is ideal for homes, offices, cafés, hotels, and minimalist interior projects.
-
Bluetooth Speaker for 5 mm Magnetic System – 10W, Bluetooth 5.4, Host + Sub Unit, DC 24-48V
Bluetooth speaker for 5 mm magnetic system is designed for modern Universal Superslim 5MM magnetic track systems where wireless background audio is desired together with minimalist lighting. The device is installed into a compatible magnetic track, operates in a low-voltage DC 24-48V system, supports Bluetooth V5.4 connection and can be used as the main Host or an additional Sub Unit speaker.
Main idea:
This model is intended for 5 mm magnetic track systems when a compact Bluetooth speaker is needed for background music without separate ceiling speakers, additional audio cables and visible audio equipment.Power
10 WBluetooth
V5.4Power supply
DC 24-48VSystem
5 mm magnetic trackOperating principle
The speaker is installed into a compatible Universal Superslim 5MM magnetic track and powered from a low-voltage DC 24-48V system. One device is set as the Host – a phone, tablet or another audio source connects to it via Bluetooth.
Additional speakers are set as Sub Unit and automatically connect to the main Host device. This allows a wireless multi-speaker background music system to be created, where the audio signal between devices is transmitted without separate audio cables.
What does the Host + Sub Unit system mean?
Host is the main speaker that receives the Bluetooth signal from a phone or another device. Sub Unit is an additional speaker that synchronizes with the Host device and reproduces the same audio. The mode is selected using a DIP switch on the rear side of the device. The DIP switch must only be changed when the device is not connected to power.Technical parameters
Product type Bluetooth speaker for magnetic system Magnetic system Universal Superslim 5MM System Magnetic Track Rated power 10 W Maximum power consumption ≤10 W Power supply voltage DC 24V-48V System type Low-voltage magnetic track system Bluetooth version Bluetooth V5.4 Bluetooth operating distance Up to 10 m barrier-free Distance between Host and Sub Unit Up to 20 m barrier-free Operating modes Host / Sub Unit Mode switching By DIP switch on the rear side of the device Signal 12 dB LED indicator LED breathing light Dimensions Ø65 x 75 mm Colour Black Installation type Installed into a compatible 5 mm magnetic track Key features
- Universal Superslim 5MM magnetic system – designed for compatible ultra-slim magnetic tracks.
- Bluetooth V5.4 connection – for wireless music playback from a phone, tablet or another device.
- Host and Sub Unit modes – allow a multi-speaker system to be created.
- Automatic connection of additional speakers – one Host can connect several Sub Unit devices.
- Low-voltage DC 24-48V power supply – adapted for magnetic track systems.
- Up to 10 m Bluetooth distance – when used without obstacles.
- Up to 20 m between Host and Sub Unit – for wireless audio distribution in the room.
- LED breathing light – for visual operating status indication.
- Black minimalist enclosure – matches modern magnetic track systems.
Where is it used?
- Modern living rooms – when lighting and background audio are integrated into one magnetic system.
- Kitchens and dining areas – for discreet music playback without separate speakers.
- Cafés – for a minimalist background music solution in customer areas.
- Hotel rooms – for aesthetic integration of audio and lighting.
- Offices – for lounge areas, waiting rooms and representative spaces.
- Showrooms – when it is important to maintain a clean, modern ceiling or wall design.
- Smart home projects – for wireless audio playback together with a magnetic lighting system.
Practical usage example
For example, in a modern living room, a 5 mm magnetic track system with LED luminaires is installed. One Bluetooth speaker, set as Host, is inserted into the same system, while additional Sub Unit speakers are placed in other areas of the room.
A phone connects to the Host device via Bluetooth, and music is automatically transmitted to the additional speakers. This integrates lighting and background audio into one aesthetic system without separate ceiling speakers or visible audio cables.
Use according to need
For a home user: suitable for a living room, kitchen or bedroom when integrated sound without separate speakers is desired.
For an interior designer: allows lighting and sound to be combined in one minimalist magnetic system.
For a café or hotel owner: helps install background music while maintaining a clean and modern interior appearance.
For an installer: it is important to check magnetic system compatibility, power supply voltage and Host / Sub Unit layout before installation.
Advantages
- Designed for a 5 mm magnetic system – integrates into modern magnetic tracks.
- Bluetooth V5.4 – for convenient music playback from smart devices.
- Host + Sub Unit function – for a multi-speaker system.
- No separate audio cables required between speakers.
- DC 24-48V low-voltage power supply – for compatible magnetic systems.
- 10 W power – for background music in small and medium spaces.
- Minimalist black enclosure – matches contemporary interiors.
- LED indicator – for clearer operating status.
Disadvantages / limitations
- Works only with a compatible 5 mm magnetic system – not suitable for any track.
- Bluetooth distance is limited – approx. 10 m without obstacles.
- Host and Sub Unit connection may be weakened by obstacles, walls or metal structures.
- Requires DC 24-48V power supply from a compatible system.
- Not suitable for 100V line sound systems and is not an IP network audio terminal.
Installation and usage notes
Before installation, it is necessary to check whether the magnetic track system used is compatible with the Universal Superslim 5MM standard and whether the power supply voltage meets the DC 24-48V requirement. It is also important to plan the placement of Host and Sub Unit devices according to actual room conditions.
- Switch the DIP switch only when the device is not connected to power.
- Set one device as Host and additional devices as Sub Unit.
- Check DC 24-48V power supply compatibility.
- Do not install into incompatible magnetic tracks.
- Do not set too large a distance between Host and Sub Unit, especially if there are obstacles between them.
- Use indoors unless a clear IP protection rating is specified.
- Before installation, check the load capacity of the magnetic track and the condition of the contacts.
- Installation is recommended to be entrusted to a qualified specialist.
Quick selection guide
Choose a Bluetooth speaker for a 5 mm magnetic system when a background music solution is needed that integrates into a modern magnetic track system together with lighting.
Power
10 WBluetooth
V5.4Power supply
DC 24-48VSystem
5 mm Magnetic TrackSuitable when you need:- a Bluetooth speaker for a magnetic 5 mm track system;
- background music together with minimalist lighting;
- a Host + Sub Unit multi-speaker system;
- a low-voltage DC 24-48V audio solution;
- a black, aesthetic and almost invisible speaker for a modern interior.
Check before ordering:- whether the existing magnetic system is Universal Superslim 5MM type;
- whether DC 24-48V voltage is used in the track;
- whether Bluetooth is required instead of a 100V or IP network speaker;
- whether 10 W power is sufficient for the planned room;
- how many speakers will be used as Sub Unit;
- whether there will be obstacles between Host and Sub Unit that may weaken the connection.
Important reminder:
This is a Bluetooth speaker for a magnetic 5 mm track system. It is not intended for 100V line audio systems or IP network sound reinforcement. Before installation, magnetic track compatibility and DC 24-48V power supply must be checked.FAQ – frequently asked questions
Is this speaker suitable for all magnetic tracks?
No. It is designed for a compatible Universal Superslim 5MM magnetic system. Before ordering, the track type and power supply voltage must be checked.Can several speakers be used at the same time?
Yes. One device is set as Host, while additional devices are set as Sub Unit. One Host can automatically connect several additional speakers.Is a separate audio amplifier required?
No, the audio signal is transmitted via Bluetooth. However, the device requires a compatible DC 24-48V power supply from the magnetic system.Is this an IP network speaker?
No. This is a Bluetooth speaker, not an Ethernet / IP network audio terminal.What is the maximum distance between devices?
The Bluetooth connection distance is specified up to 10 m without obstacles, and between Host and Sub Unit – up to 20 m without obstacles. The actual distance depends on the room structure.Bluetooth audio solution for 5 mm magnetic track systems
The Bluetooth speaker for 5 mm magnetic system is a practical solution for modern interiors where lighting and background music are to be combined in one aesthetic magnetic track system.
Thanks to Bluetooth V5.4 connection, Host + Sub Unit operating modes, DC 24-48V low-voltage power supply, up to 10 m Bluetooth distance, up to 20 m distance between the main and additional device, LED indicator, black enclosure and compatibility with the Universal Superslim 5MM system, this speaker is suitable for homes, cafés, hotels, offices and smart space projects.
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Terminal clamp | electrical wire connector | universal | 2x0.2-4mm² | for all wire types | WAGO | 221-412 | 4050821808435Code: WAGO 221-412Price 0.30 € VAT incl.( 0.25 € VAT excl. )


















