Electric wall-mounted / freestanding convector radiator | 1000 W | 230 V | 420×540×84 mm | IP24C | Electronic programmable thermostat | Adax VP1110 KET

Electric wall-mounted / freestanding convector radiator | 1000 W | 230 V | 420×540×84 mm | IP24C | Electronic programmable thermostat | Adax VP1110 KET

Adax VP1110 KET is a convector electric radiator with an electronic programmable thermostat, designed for heating rooms in residential and commercial premises. Mounted on a wall with the included bracket, or, with separately purchased legs, placed on the floor. IP24C protection class allows installation in bathrooms and other damp rooms.

Main point:
Many convector heaters are unsuitable for damp rooms or only have a mechanical thermostat with large temperature swings. VP1110 KET solves both problems: IP24C protection allows mounting in a bathroom near the shower zone boundary, and the electronic thermostat maintains temperature more precisely than a mechanical one across the 5–35 °C range, saving electricity. Connection via a cable with a plug into a socket means that additional electrical installation work is usually not required – wall mounting is enough.

What makes VP1110 KET useful?
It lets you heat a specific room – a bathroom, bedroom, office – without reworking the central heating: just mount it on the wall and plug it into a socket. The IP24C class and the 75 °C limited surface temperature together provide a safe solution for damp rooms and rooms used by children.

• Electronic programmable thermostat – maintains the set temperature within the 5–35 °C range more precisely than a mechanical thermostat.
• IP24C protection class – can be mounted in bathrooms and other damp rooms.
• Plug connection – 1.20 m cable with plug, additional electrical installation is usually not required.
• Overheat protection – a built-in protective cut-out limiting the heating element's temperature.
• Does not burn air or dust – suitable for long-term use in living spaces without extra air drying.
• Flexible mounting location – normally hung on the wall, or, with legs, additionally placed on the floor.

• Bathrooms and shower rooms (due to IP24C protection class)
• Bedrooms and children's rooms
• Additional or main heating for offices and work rooms
• Summer houses and garden cabins without central heating
• Basements and utility rooms
• Hallways and corridors
• Rented flats, where a simple heater requiring no installation work is needed
• Temporary work spaces, storage rooms, garage spaces with an electricity supply

In a 10 m² tiled bathroom with no underfloor heating, VP1110 KET is hung on the wall beyond the shower's damp zone boundary, with the thermostat set to 22 °C. The 1000 W power is enough to maintain a comfortable temperature after a shower, and the electronic thermostat switches the element on only when needed, avoiding continuous operation and unnecessary electricity consumption.

• When installing in a bathroom, keep a safe distance from the shower or bath's damp zone according to electrical installation requirements.
• Leave at least 250 mm of free space above the radiator and 50 mm below it for air circulation.
• Do not cover the radiator with fabric or furniture – the heating element needs a free air flow.
• Use only the included or manufacturer-recommended mounting bracket.
• The socket must be reachable without stretching the cable and must meet the room's dampness zone requirements.
• Before mounting, make sure the wall will bear the radiator's weight together with the mounting elements.

Quick selection guide

Can it be mounted in a bathroom?
Yes, the IP24C protection class allows mounting in damp rooms, keeping a safe distance from direct water flow.

Is a separate electrical supply needed?
No, the radiator is connected via a 1.20 m cable with a plug to a standard 230 V socket.

Can it be placed on the floor?
Yes, with separately purchased legs; a wall mounting bracket is included as standard.

What temperature range does the thermostat support?
The electronic thermostat regulates temperature within the 5–35 °C range.

How much room area is 1000 W of power sufficient for?
Depends on insulation, but as a guideline up to approx. 10–12 m² – for a larger area a higher-power version or several units is recommended.

What is the manufacturer's warranty?
A 5-year Adax warranty is provided.

Electric wall-mounted / freestanding convector radiator | 1000 W

Adax VP1110 KET is a 1000 W convector electric radiator with an electronic programmable thermostat and IP24C protection class, suitable for both dry and damp rooms. Mounted on the wall or, with additional legs, on the floor, connected via a plug into a socket, with a 5-year manufacturer warranty.