Electrical distribution | modular enclosure | box | panel | 2 modules | 107x100x148mm | transparent door | flush-mounted | plastic | IP40 | Makel | 8508

Technical Specifications

Manufacturer: Makel
Product type: modular electrical distribution board / box
Installation type: flush-mounted
Number of modules: 2 modules
Dimensions: 107 x 100 x 148 mm
Door: transparent
Enclosure: plastic
Protection class: IP40
Purpose: for mounting modular electrical components
Installation location: indoor premises
Suitable for: small distribution, protection or control solutions

Functions

Modular device installation – designed for mounting 2-module circuit breakers, relays or other DIN-type components.
Flush installation – the board is installed into the wall, leaving only a neat front cover visible.
Electrical circuit protection – can be used to protect small electrical lines, branches or individual consumers.
Aesthetic solution – suitable for premises where a clean and tidy electrical installation appearance is important.
Transparent door – allows quick visual inspection of the installed devices.
Compact size – convenient for installation in small spaces, niches, technical zones or next to individual devices.
Protection against touch and dust indoors – IP40 protection class is suitable for dry indoor areas where there is no direct moisture or water splashes.

Usage

For household users: Can be used in houses or apartments when a separate small electrical protection point is needed for a specific area or device. For example, it can be installed in a garage, storage room, technical room, next to a heating controller, gate automation or another electrical unit.

For electricians: A convenient solution when 1–2 modular devices need to be installed quickly and neatly. Flush installation allows the enclosure to be hidden inside the wall, while the transparent door makes operation and visual inspection easier.

For engineers or designers: When designing small electrical distribution points, this board is suitable as a compact solution for auxiliary protection, local control or a small electrical unit. Due to its 2-module capacity, it is suitable for simple circuits where a large distribution board is not required.

For commercial premises: Can be used in offices, shops, utility rooms, administrative areas or other facilities where a small, aesthetic and easily accessible electrical distribution point is required.

Advantages

Transparent door allows the device status to be seen.
Suitable for small electrical distribution and protection solutions.
Plastic enclosure – lightweight and easy to install.
Neat flush-mounted installation.

Disadvantages

Suitable only for 2 modules, therefore not suitable for larger electrical circuits.
IP40 protection class is not intended for outdoor conditions or damp rooms.

Where is this modular board used?

This 2-module flush-mounted electrical distribution board is used indoors where a small number of modular electrical devices need to be installed. It is suitable for homes, apartments, garages, storage rooms, offices, technical rooms, utility areas or small electrical control points.

What is the board made of?

The board enclosure is made of plastic, and the door is made of transparent plastic. This solution allows the status of the devices installed inside to be easily seen without opening the door.

What is this board intended for?

It is intended for mounting modular electrical components, such as circuit breakers, relays, small control modules or other DIN-type devices. The board is used to protect, control or distribute small electrical circuits.

Is the board suitable for outdoor use?

No, this board has an IP40 protection class, so it is intended for use in dry indoor premises. For outdoor use, damp rooms or places where water splashes may occur, a board with a higher IP protection class should be selected, such as IP54, IP65 or IP66.