Electrical distribution | modular enclosure | box | panel | 24 modules | 410x330x120mm | sealed | surface-mounted | steel | IP54 | IEK | MKM11-N-24-54-Z | 4606056087086

Modular metal distribution board – 24 modules, 410x330x120 mm, IP54

Modular metal distribution board, designed for mounting modular electrical equipment in residential, commercial, technical, and industrial buildings. This is a 24-module surface-mounted steel enclosure with a locking mechanism, a metal lock with two keys, sealing gaskets, a mounting plate, and installation accessories. Due to its IP54 protection rating, the board can be used both indoors and in appropriately selected outdoor or technical environments.

• In residential buildings – for mounting electrical groups, protection, and distribution equipment.
• In commercial premises – for small to medium-sized electrical distribution nodes.
• In technical rooms – for mounting automation, protection, and control components.
• In utility buildings and workshops – when a sturdier metal enclosure with a lock is required.
• In outdoor or semi-outdoor conditions – only after evaluating the environment, mounting location, cable entries, and IP54 limits.

For example, the board is installed on a wall in a technical room or utility building. Inside, circuit breakers for separate lighting and socket groups, a residual current device (RCD), a surge arrester, terminal blocks, and other modular components can be installed.

Due to the lockable door, the equipment inside is better protected against unauthorized access, and the metal enclosure provides a stronger and more reliable mounting base for electrical apparatus.

The modular distribution board is part of an electrical installation; before installation, it is necessary to assess the load, cable entries, protection devices, grounding, environmental conditions, and the specific electrical scheme.

• Installation must be performed by a qualified electrician in compliance with electrical safety regulations.
• The metal enclosure must be properly assessed for grounding according to the specific installation scheme.
• IP54 protection only applies if installed correctly – use appropriate cable entries and ensure the integrity of the sealing gaskets.
• The board is not intended for submersion in water or continuous direct water flows.
• Modular equipment must be selected based on load, network type, and protection requirements.
• For outdoor conditions, it is recommended to additionally assess protection against direct precipitation, UV exposure, condensation, and mechanical damage.

Quick selection guide

24-module metal distribution board – a suitable choice when you need a robust, surface-mounted, lockable, and IP54-rated enclosure for modular electrical equipment. It is suitable for electrical distribution systems in residential, technical, commercial, and utility buildings.

Robust 24-module metal board for electrical equipment

The modular distribution board provides a reliable place to mount electrical protection, distribution, and control equipment in one tidy metal enclosure.

With a 24-module capacity, IP54 protection, lockable door, sealing gaskets, mounting plate, and installation accessories, this board is a practical choice for indoor, technical, utility, and properly protected outdoor electrical installations.