Products catalog

Home/Product Catalog/Quality used products/Lamp control ballasts
  • New item   Electronic ballast for CDM metal halide lamp | 35 W | 220–240 V | Philips PrimaVision Compact HID-PV C 35/S CDM | 9137006044 | 9610327651 | 9610327714 | 9610327847

    Electronic ballast for CDM metal halide lamp | 35 W | 220–240 V | Philips PrimaVision Compact HID-PV C 35/S CDM | 9137006044 | 9610327651 | 9610327714 | 9610327847

    Code: 9137006044
    Barcode: 9610327651
    Inquire about this item
    Price 15.95 € VAT incl.
    ( 13.18 € VAT excl. )

    Used product. Philips PrimaVision Compact electronic ballast for one 35 W CDM metal halide lamp, 220–240 V, 50/60 Hz, with integrated ignition. Dimensions 109.6 × 74.4 × 32.2 mm.

  • Product description

    Electronic ballast for CDM metal halide lamp | 35 W | 220–240 V | Philips PrimaVision Compact HID-PV C 35/S CDM | 9137006044 | 9610327651 | 9610327714 | 9610327847

    Philips PrimaVision Compact HID-PV C 35/S is an electronic ballast for one 35 W CDM (ceramic metal halide) lamp. It integrates ignition and stable lamp supply, so the luminaire needs no separate choke, ignitor or capacitor. This is a used product intended for repairing existing luminaires.

    Key idea:
    35 W CDM lamps are widely used in spotlights for shops, shop windows and exhibitions. When the ballast fails, the same Philips HID-PV C 35/S model puts the luminaire back into operation without modification and without changing the lamp.
    Lamp
    1 × 35 W CDM
    Voltage
    220–240 V, 50/60 Hz
    Cable to lamp
    up to 1.5 m
    Dimensions
    109.6 × 74.4 × 32.2 mm

    How it works

    The ballast is mounted inside the luminaire housing and connected between the 220–240 V mains and the lamp holder. When power is applied, it ignites the CDM lamp without an external ignitor.

    Once the lamp is lit, the ballast keeps the lamp power stable. This matters for CDM lamps: a stable supply helps keep the light colour consistent throughout the lamp life.

    The compact plastic housing with /S type connections is designed for built-in use, so it is usually replaced with the same model at the same fixing points.

    Why choose Philips HID-PV C 35/S?
    It is an original Philips PrimaVision Compact replacement for 35 W CDM luminaires: same dimensions, fixing and wiring, so the repair takes only a few minutes.

    Technical specifications

    Product type Electronic ballast for CDM metal halide lamp
    Manufacturer / series Philips PrimaVision Compact
    Model HID-PV C 35/S CDM
    Codes 9137006044, 9610327651, 9610327714, 9610327847
    Condition Used product
    Lamp 1 × 35 W CDM
    Input voltage 220–240 V
    Mains frequency 50/60 Hz
    Inrush current 26 A (0.25 ms)
    Ballasts per 16 A (B) circuit breaker up to 24 pcs
    Max. cable length to lamp 1.5 m
    Max. case temperature tc 80 °C
    Ambient temperature −20…+55 °C
    Dimensions 109.6 × 74.4 × 32.2 mm (mounting hole spacing 98.5 mm)
    Weight 216 g
    Housing Plastic, /S type
    Dimming Not dimmable
    Compliance EN 61347-2-12, CE, ENEC

    Main functions

    • Integrated ignition – no separate ignitor needed
    • Stable lamp power – the CDM lamp light colour stays more consistent
    • Compact housing – fits small spotlights and track luminaires
    • Low inrush current – up to 24 ballasts can be connected to one 16 A (B) circuit breaker
    • Flicker-free and hum-free operation – suitable for shops and exhibitions

    Where is it used?

    • Shop spotlights with a 35 W CDM lamp
    • Track luminaires in shop windows and showrooms
    • Museum and gallery exhibition lighting
    • Hotel and restaurant accent lighting
    • Car showroom lighting
    • Facade accent floodlights with a 35 W CDM lamp

    Use by need

    For a retail chain technical team.
    Quickly restores shop window luminaires with the same Philips model.
    For a luminaire repair technician.
    Original replacement: same dimensions, fixing and wiring.
    For an exhibition lighting maintainer.
    Keeps the same CDM light colour as the other luminaires in the room.

    Practical use

    If one of several identical 35 W CDM luminaires in a shop no longer switches on and a new lamp does not help, replace the ballast with the same HID-PV C 35/S model. The luminaire will again shine with the same colour as the others, because the lamp and ballast remain the same.

    Pros

    • Original Philips PrimaVision Compact model
    • Integrated ignition
    • Compact: 109.6 × 74.4 × 32.2 mm
    • Up to 24 pcs per 16 A (B) circuit breaker
    • Lower price than a new ballast

    Cons / limitations

    • Used product – check the condition and warranty terms on the product page
    • Only for a 35 W CDM lamp – not suitable for 20 W or 70 W lamps
    • Cable to the lamp – no longer than 1.5 m
    • Install only inside a luminaire
    • Not dimmable

    Safety and installation notes

    • Disconnect the power before work and make sure no voltage is present
    • Cable to the lamp – no longer than 1.5 m
    • Do not exceed the 80 °C case temperature: do not cover the ballast with insulation
    • Remove the old ignitor if you replace an electromagnetic system
    • Installation must be carried out by a qualified electrician

    Quick selection guide

    35 W CDM
    220–240 V
    50/60 Hz
    Cable ≤ 1.5 m
    tc 80 °C
    109.6 × 74.4 × 32.2 mm
    Suitable when you need to:
    • Replace a failed Philips HID-PV C 35/S with the same model
    • Restore a 35 W CDM luminaire
    • Keep the same light colour across several luminaires
    Check before use:
    • Lamp type and power (35 W CDM)
    • Cable length to the lamp (up to 1.5 m)
    • Whether the ballast fits the luminaire: 109.6 × 74.4 × 32.2 mm
    • That no old ignitor remains in the luminaire
    Important reminder: the ballast does not replace the lamp – if the lamp changes colour or flickers, check the lamp first. This ballast is not suitable for LED lamps.

    FAQ

    Is it suitable for a 70 W CDM lamp?
    No, this model is intended only for a 35 W CDM lamp.
    Is a separate ignitor needed?
    No, ignition is integrated in the ballast.
    Can it be connected to a 230 V mains?
    Yes, the ballast is intended for 220–240 V, 50/60 Hz mains.
    What is the maximum cable length to the lamp?
    Up to 1.5 m.
    How many ballasts can be connected to a 16 A B circuit breaker?
    Up to 24 units.
    Can the light be dimmed?
    No, the ballast is not dimmable.

    Electronic ballast for CDM metal halide lamp | 35 W | 220–240 V | Philips PrimaVision Compact HID-PV C 35/S CDM | 9137006044 | 9610327651 | 9610327714 | 9610327847

    Used Philips PrimaVision Compact HID-PV C 35/S electronic ballast for a 35 W CDM lamp with integrated ignition – an original replacement for repairing shop, shop window and exhibition luminaires.

    Published: 2026-10-29 · Data verified against the manufacturer datasheet: 2026-10-29

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Subscribtion to new arrivals

    privacy policy

    Information