Electronic keypad lock | digital | 110x28x19mm | zinc alloy | backlit | black

Electronic keypad cabinet lock – touch keypad, public and private modes, emergency USB Type-C power input

Electronic keypad cabinet lock is designed for locking wardrobes, cabinets, drawers, changing-room storage compartments and other wooden or metal furniture. The door is unlocked by entering the configured password, eliminating the need to carry a mechanical key or worry about losing it.

The touch-sensitive numeric keypad is backlit, making the lock convenient to operate even in poorly lit rooms. A password of 4 to 15 digits can be set, the protective virtual password function can be used, and the public and private operating modes allow the lock to be adapted for both personal use and temporary use by multiple users.

The lock is powered by four AA batteries. A warning is issued when the batteries are running low, and if they are completely discharged, the lock can be temporarily powered through the external USB Type-C emergency power connector to enter a valid code.

• No mechanical key is required.
• The password can be set and changed by the user.
• The numeric keypad remains visible in low-light conditions.
• The lock can be used both privately and on publicly used lockers.

• The cabinet is assigned to a permanent user.
• The user sets their own password.
• The same code remains valid for repeated use.
• The password remains valid until it is changed.

1. The user selects an available cabinet.
2. They place their belongings inside and set a temporary password.
3. They later unlock the cabinet using the same code.
4. After unlocking, the previous user's code is deleted and the cabinet is prepared for the next user.

1. Connect a suitable USB power source to the Type-C connector.
2. Wait for the touch keypad to switch on.
3. Enter a valid user or administrator code.
4. Open the cabinet.
5. Replace the four AA batteries.

• Code unlocking – no mechanical key required.
• Backlit touch keypad.
• 4–15-digit user password.
• Separate administrator password.
• Public mode for changing users.
• Private mode for permanent personal use.
• Single-use code in public mode.
• Virtual password function to protect against code observation.
• Automatic warning after four incorrect code entries.
• Low-battery warning.
• USB Type-C emergency power.
• Password memory during power loss.
• Automatic locking system.
• Separate control panel and internal mechanism.
• Zinc alloy construction.
• Suitable for wooden and metal furniture 0.6–20 mm thick.

1. Check the furniture construction. Assess the thickness, material and opening direction of the door or drawer.
2. Check the installation location. There must be sufficient space on the inside for the lock body, battery compartment and locking mechanism.
3. Use the installation drawing. Accurately mark the openings for the front panel and fasteners.
4. Prepare the openings. Select the drilling or milling method according to the wooden or metal furniture construction.
5. Install the front panel. The touch keypad must be easily accessible from the outside.
6. Secure the internal lock mechanism. Do not overtighten the fasteners.
7. Install the strike plate. It must align precisely with the lock latch.
8. Insert four AA batteries. Observe the indicated polarity.
9. Set the administrator code. The factory code should be changed immediately.
10. Select the operating mode. Set public or private mode.
11. Set the user password.
12. Perform several test cycles. Check locking, unlocking, keypad operation and latch movement before finally closing the door.

• Before closing the door, check that the configured code works.
• Change the factory administrator password.
• Do not use easily guessed codes such as 1234 or 0000.
• Do not store the administrator code in a publicly accessible location.
• When a low-battery warning appears, replace the batteries immediately.
• Do not mix old and new batteries.
• Protect the touch panel from strong impacts and scratching.
• Do not use the lock in wet or outdoor environments unless a suitable IP protection rating has been confirmed.
• Do not use the USB Type-C connector to charge the AA batteries.
• Do not force the door closed if the lock mechanism is pressing against the strike plate.
• When installing in a publicly used location, establish an administrator procedure for cases where the user code is forgotten.

• Clean the front panel with a soft, dry or slightly damp cloth.
• Do not use abrasive cleaners or aggressive solvents.
• Periodically check the alignment of the lock and strike plate.
• Check that the fasteners have not loosened.
• Replace the batteries as soon as the low-charge signal appears.
• If the lock will not be used for a long period, remove the batteries.
• Periodically check the operation of the administrator code.
• If the mechanism begins to jam, first check its alignment and the condition of the batteries.

Electronic keypad cabinet lock for public and private use

The compact electronic lock allows a furniture door or drawer to be unlocked without a mechanical key. The backlit touch keypad makes it convenient to enter a password of 4 to 15 digits even in a poorly lit room.

Private mode is intended for permanent use by one person, while public mode allows each new user to set a temporary code for one locking and unlocking cycle. This makes the lock suitable for homes, offices, fitness clubs, yoga studios, schools and other shared-use spaces.

The virtual password function allows the actual code to be hidden among additional digits, while a warning signal is activated after four incorrect entries. Separate user and administrator passwords are supported.

The lock is powered by four AA batteries and provides a low-battery warning. If the batteries become completely discharged, the keypad can be temporarily powered through the USB Type-C connector, allowing the cabinet to be unlocked with a valid code and the batteries to be replaced.

The zinc alloy construction and split front-panel and internal-mechanism design are suitable for wooden and metal furniture with a thickness of 0.6–20 mm.