Electronic lock with RFID reader | fingerprint | PIN code | Bluetooth BLE 4.0 unlocking | for cabinet | drawer | 63x58x20mm | black

Smart Cabinet Lock | Bluetooth BLE 4.0 | RFID | Fingerprint | PIN Code | App | Type-C

Multifunctional smart cabinet lock designed for drawers, cabinets, shoe cabinets, sliding doors and other single-door or double-door furniture. The lock can be opened in several ways – via Bluetooth, RFID card, fingerprint or PIN password, allowing one lock to be adapted to different users and access scenarios.

This is an electronic cabinet lock combining four main access methods in one device: Bluetooth control, RFID card, fingerprint and digital password. It is intended for furniture where a mechanical key is to be replaced by electronic access control.

Several unlocking methods are combined in one device, so the user is not limited to a single access method. For example, a fingerprint can be used for everyday access, while an RFID card, PIN code or Bluetooth control can be used as alternatives.

• Bluetooth BLE 4.0 unlocking via smartphone.
• RFID card recognition.
• Fingerprint unlocking.
• PIN password entry via integrated keypad.
• Up to 45 users.
• Smartphone app control.
• Bluetooth communication range up to 10 m.
• Powered by a CR123A 3 V lithium battery.
• Type-C interface for power / charging.
• Reinforced 8.5 mm stainless steel latch.

• Drawers.
• Shoe cabinets.
• Document cabinets.
• Office furniture.
• Locker cabinets.
• Home furniture.
• Single-door cabinet doors.
• Double-door cabinet doors.
• Sliding furniture doors, provided that their construction allows the latch to be installed correctly.

The external control module is installed in a user-accessible position on the furniture door or drawer, while the electronic locking mechanism is mounted inside the furniture. The mating locking part must be positioned so that when the door is closed, the lock latch aligns precisely with the locking mechanism. Depending on the cabinet construction, the installation direction and angle of the internal components may vary.

Cabinet designs vary, so before drilling or permanently fixing the lock, it is recommended to check the relative position of the control module, locking mechanism and mating part, as well as the direction of door movement.

• Before installation, check that the lock dimensions and mechanism travel are suitable for the specific furniture.
• Install the internal mechanism and latch in precise alignment with each other.
• Prevent condensation from forming inside the electronics.
• Use the specified type of battery.
• When the battery level is low, replace the battery or use the provided Type-C power function according to the instructions.
• Do not use the lock outside the specified 0–60 °C temperature range.
• Before final fixing, test the mechanism several times without closing the cabinet in a way that could prevent reopening.

Smart Cabinet Lock | Bluetooth | RFID | Fingerprint | PIN

Compact multifunctional electronic cabinet lock with Bluetooth BLE 4.0, RFID card, fingerprint and PIN code unlocking. Designed for drawers, cabinets, shoe cabinets and other suitably constructed furniture doors. Supports up to 45 users, can be controlled by smartphone and features a reinforced stainless steel locking mechanism.