Flexible aluminum air duct | for ventilation | ventilation systems | D200mm | 3,15m | silver | LAO200U
Code: 18722Price 10.89 € VAT incl.( 9.00 € VAT excl. )Flexible aluminium ventilation duct Ø200 mm – a practical solution for air supply, extraction and ventilation equipment connection systems. The 3.15 m long duct is made of 80 µm aluminium foil, is lightweight, flexible and suitable for use at temperatures from −30 °C to +300 °C. Its flexible construction allows convenient connection of fans, cooker hoods and other Ø200 mm ventilation components in confined or complex installation spaces.
-
Flexible aluminium duct | Ø200 mm | 3.15 m | 80 µm | −30...+300 °C | for ventilation and air-handling systems | silver
Flexible aluminium ventilation duct with a diameter of 200 mm and a length of 3.15 m – a practical solution for air supply, extraction and distribution systems in residential, commercial and industrial buildings. The duct is made of 80 µm thick aluminium foil, providing low weight, flexibility and resistance to temperatures from −30 °C to +300 °C. The flexible construction makes it easier to connect fans, air-distribution ducts, cooker hoods and other ventilation equipment, particularly where installation space is limited or the duct direction must be changed. The silver-coloured metal surface is suitable for technical installations. The 3.15 m length makes it possible to form duct connections of the required length, while the 200 mm diameter allows the product to be integrated into corresponding branches of ventilation systems.
Key point:
A ventilation system cannot always be built exclusively with rigid metal or plastic ducts. Sometimes components positioned at different angles need to be connected, structural obstacles must be bypassed or a fan must be connected to an existing duct. A flexible 200 mm diameter aluminium duct makes it easier to adapt the air-duct route to specific installation conditions. The 80 µm aluminium-foil construction combines flexibility, low weight and resistance to temperature changes. It is a practical solution where fast installation, the correct air-duct diameter and convenient connection of ventilation-system components are important.⚡ Spark: Phase, why choose a flexible aluminium duct instead of an ordinary rigid ventilation pipe? Will a 3.15-metre duct reduce airflow?
⚙ Phase: A flexible duct is particularly useful when a fan, cooker hood or other device needs to be connected and there is no straight duct route at the installation location. It can be bent and adapted to the existing structure. However, it is important to stretch the duct as much as possible and avoid sharp bends. Every corrugation, compression or bend increases aerodynamic resistance. Therefore, a flexible duct is a convenient connecting element, while longer main runs are often more efficient with rigid ducts that have a smoother internal surface.
Duct diameter
Ø200 mmDuct length
3.15 mAluminium foil
80 µmTemperature range
−30...+300 °COperating principle
A flexible aluminium duct is an element of an air-transport system designed to direct airflow between individual ventilation-system components. The duct forms an enclosed air passage through which air is supplied to or extracted from a room.
Air movement inside the duct is created by a fan, heat-recovery ventilation equipment or a natural pressure difference. The duct itself contains no electrical or mechanical components that generate airflow – its purpose is to convey air in the selected direction.
The 200 mm diameter allows the duct to be used with ventilation ducts, fans, air-distribution boxes and other round connections of the corresponding size. Correct duct diameter selection is important for maintaining the required airflow volume and controlling the aerodynamic resistance of the system.
The duct material is 80-micron-thick aluminium foil. A micron (µm) is one thousandth of a millimetre, so 80 µm corresponds to 0.08 mm. This thin metal construction keeps the product lightweight and makes it easy to adapt the duct at the installation site.
Its flexibility makes it possible to form bends, adjust the duct direction and connect components whose connection openings are not aligned. This is useful when installing ventilation systems above suspended ceilings, in technical recesses, attics or other confined spaces.
The 3.15 m duct section can be used as a connecting element between a fan and the main ventilation duct or between an air-extraction device and an exhaust duct.
The aluminium construction is resistant to temperature changes. The duct operating temperature range is from −30 °C to +300 °C, allowing the product to be used in systems where the temperature of the transported air differs from normal room temperature.
Temperature resistance is an important technical parameter, but the duct is not intended to replace certified chimneys, combustion-product exhaust ducts or fire-rated ducts. Components specifically designed for those applications must be used in such systems.
The internal surface and bends of a flexible duct affect airflow. If the duct is compressed or many sharp bends are formed, airflow resistance increases, which can reduce the actual transported air volume and increase fan operating noise.
For this reason, during installation it is recommended to stretch the duct as much as possible, form smooth bends and avoid using a longer section than required for the specific connection.
The duct is connected to round ventilation components using appropriately sized couplings, metal hose clamps or other purpose-designed fastening elements.
To reduce air leakage through the joints, connection points are sealed using sealing materials suitable for duct systems. This improves air-transfer efficiency and reduces losses through leaking joints.
The aluminium duct has no additional thermal-insulation layer. When cold or warm air is transported through an environment at a different temperature, separate thermal insulation may be used to help limit heat loss and condensation formation.
The silver colour is characteristic of the aluminium surface. It is a practical choice for technical spaces, ventilation-equipment connections and other installations where material properties and installation flexibility are important.
What are the benefits of this flexible aluminium duct?
The flexible Ø200 mm aluminium duct allows ventilation-system components to be connected quickly and conveniently, even when their connection openings are positioned differently. The 3.15 m length provides installation flexibility, while the 80 µm aluminium foil ensures a lightweight construction and resistance to temperatures from −30 °C to +300 °C. It is a practical solution for air supply, extraction and fan-connection systems.Technical data
General data Product type Flexible ventilation duct Purpose Air supply and extraction Duct type Flexible, round Material Aluminium foil Colour Silver Dimensions and construction Duct diameter 200 mm Nominal size Ø200 mm / D200 Duct length 3.15 m Duct length in millimetres 3150 mm Aluminium foil thickness 80 µm (0.08 mm) Construction feature Flexible, suitable for bends and connections Thermal insulation Without additional insulation layer Temperature characteristics Minimum operating temperature −30 °C Maximum operating temperature +300 °C Operating temperature range −30...+300 °C Installation and application Installation type Connection of ventilation-system components Connection form Round Ø200 mm connection Connection components Duct couplings, clamps and sealing materials Ventilation type Air supply and extraction systems Areas of use Residential, commercial, technical and industrial premises Connectable components Fans, cooker hoods, air ducts and ventilation-equipment connections Main functions
- Air supply – designed to transport air into rooms through the ventilation system.
- Air extraction – can be used to remove air from rooms and technical spaces.
- Flexible construction – allows the duct direction to be changed and bends to be formed.
- 200 mm diameter – intended for ventilation connections of the corresponding size.
- 3.15 m length – makes it possible to connect equipment located in different positions.
- Aluminium foil construction – low weight and convenient installation.
- 80 µm foil thickness – metal construction adapted for flexible air ducts.
- Temperature resistance – from −30 °C to +300 °C.
- Fan connection – suitable for connecting duct sections.
- Cooker hood connection – used in suitable kitchen air-extraction systems.
- Installation flexibility – convenient for installing ducts in confined spaces.
- Easy adaptation – allows different connection positions to be matched.
- Silver aluminium surface – practical for technical ventilation installations.
- Versatile use – suitable for ventilation connections in residential, commercial and industrial buildings.
Where is it used?
- In ventilation systems of residential houses and apartments.
- In kitchen cooker-hood extraction connections.
- For connecting fans to main air ducts.
- In connecting sections of heat-recovery ventilation systems.
- In air supply and extraction systems of technical rooms.
- In ventilation equipment for warehouses and workshops.
- In air-distribution systems of offices and administrative buildings.
- In ventilation-equipment connections in commercial premises.
- In branches of industrial air-extraction systems.
- In ventilation ducts of auxiliary and utility rooms.
- In ventilation connections above suspended ceilings and in technical recesses.
- In modernised and renovated ventilation systems.
- In duct sections where a flexible transition between components is required.
- In warm-air transport systems operating within the corresponding temperature range.
Use by requirement
For the domestic user.
Suitable for connecting a kitchen cooker hood, fan or other ventilation device to an Ø200 mm air duct. The flexible construction simplifies installation when the ventilation opening is not directly opposite the device.For the ventilation installer.
The 3.15 m aluminium duct makes it possible to form a connecting section between different ventilation components. Low weight and flexibility simplify installation in technical recesses, above ceilings and in other difficult locations.For the engineer / designer.
When designing an Ø200 mm air-supply or extraction route, a flexible connecting duct can be provided where differences in component positions must be compensated. Aerodynamic losses, airflow velocity, number of bends and transported-air temperature should be evaluated.Practical application
An Ø200 mm extraction fan is installed in the technical area of a commercial premises and must be connected to the main exhaust-air duct. Due to the existing structural elements and pipe layout, installing a straight rigid duct is inconvenient. A 3.15 m flexible aluminium duct with 80 µm foil thickness is selected. The duct section is adapted to the available space by forming smooth bends and avoiding unnecessary compression. Both ends are secured to the Ø200 mm connections using suitable clamps, and the joints are sealed with materials suitable for ventilation systems. This creates a flexible connection between the fan and the exhaust-air main, ensuring the intended direction of airflow.Advantages
- Flexible and lightweight construction.
- 200 mm nominal diameter.
- 3.15 m length.
- 80 µm thick aluminium foil.
- Temperature range −30...+300 °C.
- Convenient installation in confined spaces.
- Ability to form bends.
- Suitable for air-supply and extraction systems.
- Suitable for fan connections.
- Can be used in cooker-hood air-extraction connections.
- Convenient for renovation projects.
- Low weight simplifies transport.
- Silver aluminium surface.
- Versatile use in technical systems.
Limitations
- No additional thermal-insulation layer.
- The flexible internal surface creates greater airflow resistance than a smooth rigid duct.
- Sharp bends reduce airflow capacity.
- Aluminium foil may be damaged by sharp installation elements.
- Not designed to carry mechanical loads.
- Joints require appropriate clamps and sealing materials.
- Condensation may form on uninsulated cold-air sections.
- Outdoor installation requires suitable protection from environmental and mechanical effects.
- Not intended for use as a certified chimney.
Installation and usage recommendations
- Diameter selection. The duct is intended for Ø200 mm ventilation-system connections.
- Duct routing. During installation, the airflow route should be made as straight as possible.
- Forming bends. Sharp bends that may reduce the effective duct cross-section should be avoided.
- Compression prevention. The duct must not be compressed between structures, pipes or other equipment.
- Securing connections. Metal clamps or other ventilation fasteners suitable for Ø200 mm connections should be used.
- Sealing connections. Connection points should be sealed with materials suitable for duct systems.
- Foil protection. During installation, protect the duct from sharp edges, screws and other surfaces that could puncture the metal construction.
- Duct supports. Longer sections should be properly supported to prevent sagging and compression.
- Airflow direction. The duct can be used for both air supply and extraction.
- Aerodynamic resistance. The effect of bends, the flexible surface and route length must be considered when designing the ventilation system.
- Temperature. Operating temperature range – from −30 °C to +300 °C.
- Thermal insulation. Where heat loss or condensation must be reduced, an additional insulation layer should be provided.
- Condensation. Installation conditions for cold-air ducts should provide suitable protection against moisture accumulation.
- Cooker-hood systems. The duct may be used in suitable air-extraction connections, taking into account grease accumulation and cleaning requirements.
- Fire safety. The duct does not replace certified smoke-extraction, combustion-product exhaust or fire-rated ducts.
- Fan selection. Fan performance must match the airflow resistance of the complete duct route.
- Maintenance. The condition of the duct, joint tightness and possible dirt accumulation should be checked periodically.
- Mechanical loads. Do not place objects on the duct, hang equipment from it or use it to transfer structural loads.
- Outdoor conditions. In an open environment, the duct must be protected against atmospheric and mechanical effects.
⚡ Phase tip:
When installing a flexible duct, it is important not only to select the correct diameter but also to keep airflow resistance as low as possible. An Ø200 mm duct allows connection of ventilation components of the corresponding size, but heavy compression or a sharp bend reduces the effective airflow area. Therefore, the duct should be stretched, smooth bends should be used and the joints should be securely fixed. If the system transports cold air, additional thermal insulation helps reduce the risk of condensation. If warm air is transported, the temperature resistance of not only the aluminium foil but also all joints and sealing materials must be considered.Quick selection guide
Ø200 mm3.15 mAluminium | 80 µm−30...+300 °CSuitable when you need:- a flexible 200 mm diameter aluminium duct
- a 3.15 m ventilation connection
- an 80 µm aluminium-foil construction
- an air-supply or extraction duct
- a fan connection to the main air duct
- a cooker-hood extraction connection
- a flexible section in a difficult installation location
- a temperature-resistant metal duct
- a lightweight and quickly installed ventilation component
- a silver-coloured technical ventilation connection
Key selection parameters:- duct diameter – 200 mm
- duct length – 3.15 m
- material – aluminium foil
- foil thickness – 80 µm
- operating temperature – −30...+300 °C
- air-supply or extraction purpose
- diameter of connecting components
- duct-route length and number of bends
- need for thermal insulation
- connection fastening and sealing solution
Important: the flexible aluminium duct is intended for transporting air in ventilation systems. It is not a certified chimney or fire-rated duct. Correct installation, smooth bends and airtight joints are important for maintaining efficient airflow.FAQ – Spark asks, Phase answers
⚡ Spark: What ventilation-system diameter is this duct intended for?
⚙ Phase: It is intended for Ø200 mm round ventilation connections, fans and other compatible ventilation components.⚡ Spark: What is the length of this duct?
⚙ Phase: The duct length is 3.15 m, or 3150 mm. It is used for connecting ventilation sections where flexibility is required.⚡ Spark: What does an 80-micron foil thickness mean?
⚙ Phase: This is the thickness of the aluminium foil. 80 µm corresponds to 0.08 mm. This construction provides flexibility and low weight.⚡ Spark: Is the duct suitable for both air supply and extraction?
⚙ Phase: Yes. It can be used in both airflow directions. Actual airflow is determined by the ventilation equipment and the aerodynamic characteristics of the system.⚡ Spark: Can this duct be connected to a cooker hood?
⚙ Phase: Yes, it can be used in a kitchen air-extraction system of the corresponding diameter. The duct connections must be securely fixed and the air-extraction system itself must be suitable for kitchen operating conditions.⚡ Spark: Can hot air be transported through this duct?
⚙ Phase: The duct operating temperature range is from −30 °C to +300 °C. In higher-temperature systems, the temperature resistance of the joints, sealing components and surrounding structures must also be considered.⚡ Spark: Can it be used as a chimney?
⚙ Phase: No. This is a ventilation duct, not a combustion-product exhaust duct. Certified systems specifically designed for chimney applications must be used.⚡ Spark: Can the duct be bent at a 90-degree angle?
⚙ Phase: The flexible construction allows the duct direction to be changed, but smooth bends with a larger radius are recommended. A sharp bend can narrow the air passage and increase resistance.⚡ Spark: Does a flexible duct reduce fan performance?
⚙ Phase: Every duct creates some airflow resistance. A flexible surface, many bends and compressed sections can increase pressure losses. Stretching the duct properly reduces this effect.⚡ Spark: Can this duct be used in a heat-recovery ventilation system?
⚙ Phase: It can be used as a flexible connecting section with compatible Ø200 mm heat-recovery ventilation components. Air resistance and the need for thermal insulation should be properly evaluated.⚡ Spark: Does the duct have thermal insulation?
⚙ Phase: This is an uninsulated aluminium duct. If heat loss must be reduced or condensation prevented, additional duct thermal insulation should be used.⚡ Spark: How should the duct be attached to a fan?
⚙ Phase: The duct is slipped over a compatible Ø200 mm connection and secured with a suitable clamp. Appropriate duct-sealing materials are used to ensure airtightness.⚡ Spark: Can the duct be installed above a suspended ceiling?
⚙ Phase: Yes. The flexible construction is convenient in confined installation spaces such as above ceilings or in technical recesses. The duct must be properly supported and protected against compression.⚡ Spark: Can the duct be used outdoors?
⚙ Phase: In an open outdoor environment, the duct must be protected from direct atmospheric and mechanical effects. Outdoor ventilation routes generally use suitably protected or purpose-designed ducts.⚡ Spark: Can the duct be used in a boiler room?
⚙ Phase: Yes, in general ventilation air-supply or extraction systems, provided the room ventilation and equipment requirements are observed. It must not be used instead of a dedicated combustion-product exhaust duct.⚡ Spark: How can noise be reduced in a flexible-duct system?
⚙ Phase: Avoid sharp bends and compression, ensure the duct is properly stretched and use an appropriate fan operating mode. Sound attenuators may be installed in the system if required.⚡ Spark: Is an aluminium-foil duct easy to damage?
⚙ Phase: Aluminium foil is lightweight and flexible, so it must be protected from sharp edges, excessive stretching and mechanical compression. A properly installed and protected section can reliably perform its air-transport function.Notes and technical information
- The duct is intended for connecting components of air-supply and extraction systems.
- Aluminium foil thickness – 80 µm (0.08 mm).
- Operating temperature range – from −30 °C to +300 °C.
- Correct duct routing and airtight connections are important for efficient air transport.
- For uninsulated sections, additional thermal insulation should be selected according to operating conditions.
- The duct is not intended to perform the functions of a chimney or certified fire-rated duct.
- Connection-fastening and sealing components should be selected according to the duct diameter and system temperature conditions.
Flexible aluminium ventilation duct Ø200 mm × 3.15 m – 80 µm, temperature-resistant up to +300 °C
Flexible silver-coloured aluminium duct intended for Ø200 mm ventilation, air-supply and extraction systems. The 3.15 m construction is made from 80 µm thick aluminium foil and provides low weight, flexibility and an operating temperature range from −30 °C to +300 °C. The duct is suitable for connecting fans, cooker hoods, air ducts and other ventilation components. Its flexible construction allows bends to be formed and the duct route to be adapted in confined installation spaces. Suitable for ventilation solutions in residential houses, apartments, offices, warehouses, workshops, commercial and technical premises. To maintain efficient airflow, the duct should be installed as fully stretched as possible, with smooth bends and tightly secured joints.
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.ManufacturerThis product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Rotary deflector D100 | ball bearings | stainless steel | silverCode: 19471Stainless steel rotary deflector (wind turbine) D100 with ball bearings. Fits onto a D100 ventilation duct, extracts air without electricity and protects the duct from rain and snow.
Price 85.06 € VAT incl.( 70.30 € VAT excl. )Shut-off damper for round air duct | for ventilation | air handling systems | D100 | silver | galvanized steel | 100USOCode: 04963Round duct shut-off damper, designed to shut off, restrict, or regulate airflow in round air ducts. The damper is used in supply, exhaust, or recirculation air systems where simple and efficient control of air movement within premises is required.
Due to its galvanized steel construction, the product is resistant to corrosion, durable, and suitable for use in residential, commercial, and technical ventilation systems. Manual operation allows easy airflow adjustment without the need for an additional electric actuator or automation system.
Price 6.50 € VAT incl.( 5.37 € VAT excl. )Duct centrifugal fan El-Turbo-D 200 | D200 | 935 m³/h | 144 W | 230 V | 490 Pa | galvanized steel | silver | Eltdad-200Code: Eltdad-200Duct centrifugal fan El-Turbo-D 200 (Eltdad-200): D200, up to 935 m³/h, 490 Pa, 144 W, 230 V.
Price 159.90 € VAT incl.( 132.15 € VAT excl. )Duct silencer | for ventilation | air ventilation systems | D125 | 600mm | silver | galvanized steel | 125DUS60Code: 04935The duct silencer is designed for effective noise reduction in ventilation, heat recovery, and industrial air supply and exhaust systems. This noise attenuator is engineered to absorb turbulent air vortices and aerodynamic noise generated by fans in round air ducts, significantly reducing the overall sound emitted by the system.
The silencer is intended for use in general ventilation systems with clean air, non-explosive environments, and airflows free of sticky or aggressive particles.
Integrated connection flanges simplify installation into standard round air ducts.
To achieve maximum noise reduction efficiency, it is recommended to install the silencer as close to the fan as possible.
Price 29.72 € VAT incl.( 24.56 € VAT excl. )



















