Products catalog

  • Flexible current probe (Rogowski coil) with integrator | 5 A / 50 A | Ø100 mm | 500 mV AC | BNC | battery powered | S2-LC

    Code: ESS2-LC

    Flexible current measurement probe designed for accurate measurement of small and medium alternating current (AC) values. The device uses a Rogowski coil (SRC-100) and an integrated S2 series integrator, forming a single, inseparable system optimized for use with oscilloscopes, data loggers, and laboratory measurement equipment. The S2-LC stands out for its excellent accuracy in the low-current range (from a few mA up to 50 A), making it suitable for electronics, automation, servo motors, control circuits, and energy analysis. 

  • Technical Specifications

    Type: Flexible current measurement probe (Rogowski coil) with integrator
    Model: S2-LC
    Coil window size: 100 mm
    Rated current: 5 A / 50 A (switchable measurement ranges)
    Output signal: 500 mV AC
    Output type: 0.15 m cable with BNC (male) connector
    Accuracy (by current range):
    10 mA – ±10%; 50 mA – ±4%; 100 mA – ±2%;
    500 mA – 999 mA – ±0.5%;
    1 A – 4.99 A – ±0.5%;
    5 A – 50 A – ±0.5%
    Frequency bandwidth: 10 Hz – 10 kHz
    Power supply: 2 × AA 1.5 V batteries (not included); DC 5 V / 2 A adapter, 3.5 × 1.3 mm (included)
    Design note: S2 integrator fixed to the Rogowski coil – non-separable
    Package contents: Rogowski coil SRC-100 included
    Measurement type: AC current only

    Functions

    Non-invasive AC current measurement – no need to disconnect conductors

    Two switchable ranges (5 A / 50 A) in one device

    High accuracy in the low-current range

    Battery-powered operation – mobile measurements without fixed power supply

    BNC connector – direct connection to oscilloscopes and analyzers

    Applications

    Home / advanced user:
    Monitoring energy consumption and loads of electrical equipment, long-term measurement points where reliability is important

    Electrician:
    Measurements in electrical installations and panels, convenient solution for diagnostics and commissioning, fast and safe current measurement without interrupting circuits

    Engineer / automation specialist:
    Integration with energy analyzers, PLC, SCADA, BMS, EMS; suitable for electronics, automation, control systems, laboratory measurements, and OEM solutions where accuracy is critical

    Advantages

    Excellent accuracy from mA up to 50 A

    5 A / 50 A ranges in a single device

    Battery or adapter-powered operation

    Flexible Ø100 mm Rogowski coil

    BNC connector – professional measurement interface

    Limitations

    Designed for alternating current (AC) only

    Integrator and coil are not separable

    Not suitable for very high currents (hundreds or thousands of amperes) 

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

  • privacy policy

    Information