Flexible stainless steel air duct | for ventilation | ventilation systems | D80mm | 3m | silver | LON803
Code: 02406Price 23.62 € VAT incl.( 19.52 € VAT excl. )Flexible stainless steel ventilation duct designed for air supply and extraction systems and for connecting ventilation equipment. The segmented construction with a diameter of Ø80 mm and a length of 3 m allows the duct route to be formed conveniently in limited installation spaces and reduces the need for additional elbows. The stainless steel surface offers corrosion resistance, and the duct is suitable for residential, commercial and technical ventilation solutions.
-
Flexible stainless steel duct | for ventilation systems | Ø80 mm | 3 m | silver | LON803
LON803 flexible stainless steel ventilation duct – a metal, segmented air duct designed for air supply and extract systems where a flexible duct connection or route formation in confined spaces is required. The Ø80 mm diameter and 3 m length allow ventilation equipment and air duct components to be connected while adapting to the geometry of the installation area. The stainless steel construction provides resistance to corrosion and mechanical impact, while the silver metallic surface is suitable for technical and visible installations. The duct is installed using suitable metal clamps to ensure mechanically reliable connections and the required airtightness.
Key point:
The connection point of a ventilation unit does not always align with the direction of the duct. In such situations, a rigid pipe may require additional elbows, adapters and connection fittings, while every bend makes installation more complicated. A flexible Ø80 mm stainless steel duct makes it possible to form the required route and connect equipment using one 3 m section where installation conditions allow. This can reduce the number of individual joints, simplify installation and maintain a neat ventilation system layout.⚡ Spark: Phase, why use a flexible duct if a standard rigid pipe and a few elbows can be installed?
⚙ Phase: A rigid duct is excellent for straight routes, but when the fan outlet is in an inconvenient position or a structure has to be bypassed, additional elbows take up space. A flexible metal duct can be shaped to suit the installation location. Just remember – the more sharp bends and restrictions there are, the greater the airflow resistance. Flexibility makes installation easier, but a properly designed duct route is still essential.
Duct diameter
Ø80 mm (D80)Duct length
3 mConstruction
Stainless steel, flexible segmentedPurpose
Air supply and extractOperating principle
A flexible metal duct functions as an air transport channel between a fan, an air distribution element and other components of the ventilation system. The duct itself does not generate airflow – air moves through it because of the fan or another pressure difference created in the system.
The segmented stainless steel construction gives the duct its flexibility. Individual sections of the construction allow the direction of the duct to be changed and bends to be formed, so it can be adapted to locations where installing a rigid pipe would be more difficult.
The Ø80 mm diameter defines the nominal duct size. When selecting connection components, it is necessary to check whether the specified dimension matches the outside or inside diameter of the connection spigots. Properly matched components help ensure mechanically reliable connections.
The duct length – 3 m – allows a continuous connection section to be formed. However, the efficiency of the ventilation system depends not only on duct length but also on the geometry of the internal surface, the number of bends, air velocity and fan characteristics.
The internal surface and bends of a flexible segmented duct may create greater aerodynamic resistance than a smooth rigid duct. Therefore, the route should be kept as short as possible, avoiding sharp bends, compressed sections and unnecessary changes of direction.
The stainless steel construction helps protect the duct surface against corrosion and gives the metal channel mechanical strength. However, specific permissible operating temperatures, pressure and suitability for special media must be assessed according to the product performance characteristics.
Why is this flexible duct useful?
It allows ventilation system components to be connected where a straight rigid pipe is insufficient or where additional elbows would complicate installation. The 3 m metal construction allows a continuous route to be formed, while the stainless steel surface provides corrosion resistance. It is a practical solution for compact and geometrically more complex air supply or extract connections.Technical data
Product type Flexible metal ventilation duct Product code LON803 Purpose Air supply and extract systems Construction material Stainless steel Colour Silver (metallic) Nominal diameter Ø80 mm (D80) Specified outside diameter Ø80 mm Duct length 3 m (3000 mm) Construction type Flexible segmented metal construction Duct shape Round Route formation By bending the duct according to the installation direction Fixing method With steel clamps on both sides of the connection Additional construction feature Protective edge Corrosion resistance Stainless steel construction Compatibility with connection components Corresponding Ø80 mm fittings after checking actual connection dimensions Installation tools Hand tools suitable for clamps Areas of use Domestic, commercial and appropriate industrial ventilation systems Permissible operating temperature Specific limits not confirmed Permissible operating pressure Specific pressure class not confirmed; not intended for use in high-pressure systems without separate suitability confirmation Ensuring airtightness Suitable fittings, clamps and, if required, sealants intended for ventilation systems Main functions
- Air transport – designed to direct airflow between ventilation equipment and connection components.
- Flexible segmented construction – allows the duct direction to be changed and adapted to confined installation spaces.
- Continuous 3 m section – allows some additional joints to be avoided when forming a route of suitable length.
- Stainless steel construction – the metal surface provides corrosion resistance and mechanical durability.
- Ø80 mm size – intended for compatible small-diameter ventilation system connections.
- Bendable duct – can be shaped according to the geometry of the installation location while observing permissible bending conditions.
- Fixing with steel clamps – helps ensure mechanically reliable connections.
- Protective edge – an additional structural element in the duct edge area.
- Metallic silver finish – suitable for technical and visible engineering installations.
Where is it used?
- In residential house and apartment air extract systems.
- In kitchen hood connection routes, provided that the duct meets the requirements of the specific hood and ventilation system.
- In bathroom and WC ventilation ducts where installation and environmental conditions are compatible with the product characteristics.
- In air extract systems for utility and technical rooms.
- In general ventilation systems for garages and workshops where no special requirements apply to the hazardous nature of the extracted air.
- In connections to ventilation equipment in commercial premises and offices.
- In renovation and reconstruction projects where installation space is limited.
- In air supply or extract connections of technical equipment.
- In auxiliary ventilation systems of industrial premises after assessing the air medium, temperature and pressure.
Use according to need
For domestic users.
A solution for a small-diameter air extract route where a fan or other ventilation unit needs to be connected to an air duct. Flexibility helps avoid more complex combinations of rigid pipes in confined spaces.For ventilation installers.
The 3 m formable metal section allows the connection direction to be adapted to the specific installation situation. The duct ends are fixed to compatible fittings using metal clamps and the required sealing.For engineers / designers.
The flexible duct can be used as a connection element in systems with limited installation space. During design, its diameter, length, aerodynamic resistance, bends and the required fan operating point are evaluated.Practical application
When installing an air extract system in a utility room, the fan may not be aligned on the same axis as the existing ventilation duct. Using a rigid pipe may require several elbows and additional fittings for such a route. Instead, if project conditions allow, a flexible Ø80 mm metal duct can be used. One end is connected to the fan outlet, the other to a compatible ventilation duct fitting. The duct is formed with smooth bends without reducing its cross-section, while both ends are mechanically secured with clamps and sealed if required. The result is a compact air extract connection adapted to the actual installation location. The system airflow must be checked taking into account the resistance created by the duct.Advantages
- Flexible construction – can be adapted to different installation directions.
- 3 m section – reduced need for additional joints.
- Stainless steel construction – corrosion resistance.
- Metal body – mechanical strength.
- Compact Ø80 mm diameter.
- Ability to form the route without using separate elbows at every bend.
- Fixing with metal clamps.
- Suitable for various domestic and technical ventilation solutions.
Limitations
- The duct is intended to be bent, not arbitrarily stretched or lengthened by deforming the construction.
- Sharp bends and deformations increase airflow resistance.
- The segmented internal surface may cause greater pressure loss than a smooth rigid pipe.
- The Ø80 mm diameter may be too small for high-airflow systems.
- Not suitable for high-pressure systems without separate technical suitability confirmation.
- Thermal insulation and acoustic insulation are not declared.
- The exact permissible temperature and airtightness class are unknown.
Installation and safety notes
- Check the connection diameter. Before installation, make sure that the Ø80 mm duct is compatible with the fan, valve or other connection spigot.
- Shape the duct by bending it. Do not arbitrarily stretch it lengthwise unless this type of length adjustment is allowed by the specific construction.
- Avoid sharp bends. Too small a bending radius may deform the duct cross-section and increase airflow resistance.
- Do not compress the duct. There must be no obstacles at the installation location that reduce the duct cross-section or cause unwanted deformation.
- Secure with suitable metal clamps. Connections must be mechanically reliable so that the duct does not slip off the connection spigot.
- Ensure connection airtightness. A clamp alone may not be sufficient to achieve a specified airtightness class. If necessary, use sealing materials intended for ventilation systems.
- Provide suitable duct support. Do not allow the duct to hang freely in a way that places its weight on the fan housing or connection spigot.
- Beware of sharp metal edges. When cutting or shortening the metal duct, use protective gloves and tools suitable for the product.
- Check the operating temperature. Stainless steel itself does not mean that the complete product is suitable for any high temperature. The limits of the construction, connections and sealing materials must be taken into account.
- Do not classify the duct for smoke extraction systems without appropriate approval. A standard ventilation duct is not automatically suitable for fire smoke extraction.
- Connection of cooker hoods and special extract systems. The requirements of the specific equipment, temperature, possible grease accumulation and applicable fire-safety requirements must be assessed.
- Do not use for removing combustion products without approved suitability. This ventilation duct must not be considered a certified flue or combustion-product exhaust duct.
- Check airflow parameters. When selecting a fan, duct length, number of bends and pressure losses must be taken into account.
- Inspect the duct periodically. During operation, monitor the condition of the connections, possible deformations, contamination and reliability of the fixings.
⚡ Phase tip:
When installing a flexible duct, avoid the temptation to create the shortest route with sharp bends. In practice, a gentler bend may be more beneficial than a shorter but heavily deformed route. Before finally tightening the clamps, check that the duct is not compressed anywhere and that its ends are not under tension at the connection points. If you are designing a system for a higher airflow rate, first assess whether the Ø80 mm diameter is sufficient at all.Quick selection guide
Ø80 mm3 m lengthStainless steelFlexible constructionSuitable when you need:- an Ø80 mm ventilation system connection
- a flexible metal duct in confined installation spaces
- a 3 m air supply or extract section
- a duct that can be shaped according to the installation direction
- a stainless steel construction with a metallic finish
Check before buying:- whether the connection spigot of the fan or other equipment is compatible with an Ø80 mm duct
- whether the 3 m length is sufficient for the intended route
- whether the system airflow allows a duct of this diameter to be used
- whether suitable bending radii can be formed along the intended route
- whether the operating temperature remains within the product's permissible limits
- whether additional clamps, fittings or sealing materials are required
- whether the system has any special fire-safety, pressure or airtightness requirements
Important reminder: a flexible metal duct is not a universal replacement for all types of rigid ducts. Its use must comply with the designed airflow rate, temperature, pressure and safety requirements. Stainless steel construction by itself does not confirm suitability for smoke extraction, combustion-product transport or high-pressure systems.FAQ – Spark asks, Phase answers
⚡ Spark: What advantage does a flexible stainless steel duct have over a rigid plastic pipe?
⚙ Phase: The main advantage is the ability to change the route direction without using separate elbows at every bend. Stainless steel also provides corrosion resistance. However, a smooth rigid pipe often has lower aerodynamic resistance, so it may be more suitable for longer straight routes.⚡ Spark: Can this Ø80 mm duct be connected to a kitchen hood?
⚙ Phase: Only if the hood connection size and operating requirements allow this type of duct to be used. Many cooker hoods have an outlet diameter larger than 80 mm, so reducing the diameter may increase airflow resistance and noise and reduce extraction performance.⚡ Spark: Can the 3 m duct be stretched to make it longer?
⚙ Phase: No. This type of construction is intended to be bent and shaped, not arbitrarily lengthened by stretching. Excessive pulling force may damage the segmented joints, alter the cross-section or reduce airtightness.⚡ Spark: Can a stainless steel duct withstand high temperatures?
⚙ Phase: Stainless steel is resistant to temperature effects, but the operating limit of the complete duct is determined by its specific construction, connections and installation components. Therefore, without a confirmed temperature class, it should not be used in high-temperature systems based solely on the material name.⚡ Spark: How should the duct be correctly secured to the fan?
⚙ Phase: First check the dimensions of the connection spigot and the duct. The duct must be properly pushed over or connected according to the fitting construction, secured with a metal clamp and sealed if necessary. The clamp must not be tightened so much that it deforms the duct.⚡ Spark: Does a flexible duct reduce fan performance?
⚙ Phase: It can increase the aerodynamic resistance of the system, especially if it is long, has many sharp bends or is compressed. Higher resistance may reduce the fan's actual airflow rate. Therefore, the route should be as straight as possible and of an appropriate diameter.⚡ Spark: Can this duct be used outdoors?
⚙ Phase: Stainless steel provides corrosion resistance, but suitability for continuous outdoor exposure depends on the steel grade, connections and environmental conditions. If the duct will be exposed to precipitation, salts or aggressive atmospheres, its performance characteristics must be checked.⚡ Spark: Is an Ø80 mm diameter sufficient for bathroom or WC ventilation?
⚙ Phase: This depends on the required airflow rate, fan characteristics and duct route. A small-diameter duct may be suitable for certain systems, but Ø80 mm should not be considered a universal solution for all bathroom or WC ventilation applications.⚡ Spark: Are clamps alone sufficient to make the connection airtight?
⚙ Phase: Clamps primarily provide mechanical fixing. Airtightness also depends on the geometry of the connection spigot, the duct edge and installation quality. If the system has specified airtightness requirements, additional gaskets or special sealing materials may be required.LON803 – flexible stainless steel ventilation duct Ø80 mm, 3 m
Flexible segmented stainless steel duct designed for connecting air supply and extract systems. The Ø80 mm diameter, 3 m length, silver metallic surface and ability to form the route by bending make it suitable for ventilation installation solutions in confined spaces. The duct ends are secured with steel clamps, while connection airtightness is provided according to the requirements of the specific system. Suitable for domestic, commercial and appropriate technical ventilation solutions after assessing airflow rate, operating temperature, pressure and installation conditions.
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.ManufacturerThis product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Radial scroll-housing fan | steel | 230V | D120 | 116×205×173mm | silver | Turbo Classic SI 120 2P | 4772318404057Code: 03051Radial scroll-housing fan Turbo Classic SI 120 2P: 230 V, up to 395 m³/h, Ø120 mm connection, steel housing IP44. For local supply, extraction and cooling.
Price 177.54 € VAT incl.( 146.73 € VAT excl. )Rotary deflector D100 | ball bearings | stainless steel | silverCode: 19471Stainless steel rotary deflector (wind turbine) D100 with ball bearings. Fits onto a D100 ventilation duct, extracts air without electricity and protects the duct from rain and snow.
Price 85.06 € VAT incl.( 70.30 € VAT excl. )Access Panel | Floor Inspection Hatch for Basements | 200x200x50mm | with Concealed Lock | Aluminium Profile | RDL2020FCode: 17318Floor inspection doors – a reliable and aesthetic solution designed to provide easy and safe access to concealed engineering systems in homes or commercial premises. The robust aluminum profile, the possibility to embed and decorate the hatch with the selected floor covering, and the concealed lock give the product exceptional functionality and versatility.
Price 140.20 € VAT incl.( 115.87 € VAT excl. )Mixed-flow duct fan Turbo Join Compact 250 | D250 | 1405 m³/h | 225 W | 230 V | 2 speeds | 383×310×261 mm | white | 01868Code: 01868Mixed-flow duct fan Turbo Join Compact 250 (01868): D250, 2 speeds, up to 1405 m³/h, 488 Pa, 225 W, 230 V.
Price 224.94 € VAT incl.( 185.90 € VAT excl. )





















