Products catalog

Home/Product Catalog/Solar Energy Generation and Management Equipment/Mounting systems for solar power plants – stable and secure installation of solar panels on roofs or ground/Ground-mounted solar module structures
  •   Ground-mounted solar panel structure middle clamp | Goomax | GM-MC-XLM-02-T-D
      Ground-mounted solar panel structure middle clamp | Goomax | GM-MC-XLM-02-T-D 1
      Ground-mounted solar panel structure middle clamp | Goomax | GM-MC-XLM-02-T-D 2

    Ground-mounted solar panel structure middle clamp | Goomax | GM-MC-XLM-02-T-D

    Code: GMMCXLM02TD
    Inquire about this item
    Price 1.36 € VAT incl.
    ( 1.13 € VAT excl. )
    Want another price? Suggest yours!
    This middle clamp is designed for securing two adjacent solar modules on a ground-mounted structure. It is used not as an end clamp, but as an intermediate fastening element between rows or panels of modules when they are mounted side by side.
  • Product description

     

    Middle clamp for ground-mounted solar module structure 

    Middle clamp for solar module panels, designed for fastening solar modules in ground-mounted structures. This clamp is used between two adjacent solar modules, helping to press them against the mounting profile or structure rail. It is an important fastening component of a photovoltaic structure, used when installing solar modules in ground-mounted systems.

    Main idea:
    This middle clamp is designed for fastening two adjacent solar modules on a ground-mounted structure. It is used not as an end clamp, but as an intermediate clamping element between module rows or panels when modules are mounted side by side.
    Type
    Middle clamp
    Manufacturer
    Goomax
    Purpose
    Solar module fastening
    Application
    Ground-mounted structures

    Operating principle

    The middle solar module clamp is installed between two adjacent modules. It presses the frames of both modules against the mounting profile or the rail of the ground-mounted structure, helping to ensure stable and orderly module fastening.

    This type of clamp is used when modules are installed in a row and an even gap together with reliable clamping is required between them. End clamps are usually used on the outer edges of the modules, while middle clamps are used between modules.

    What is the difference between a middle clamp and an end clamp?
    A middle clamp is installed between two solar modules and clamps both modules at the same time. An end clamp is used on the outer edges of the modules, where only one module frame needs to be clamped.

    Technical parameters

    Product type Middle clamp for ground-mounted solar module structure
    Manufacturer Goomax
    Model / code GM-MC-XLM-02-T-D
    Clamp type Middle panel clamp
    Purpose Fastening solar modules in ground-mounted structures
    Mounting position Between two adjacent solar modules
    Application area Ground-mounted solar module structures, photovoltaic systems, PV mounting solutions
    Suitable for use with Solar module frames, mounting profiles, ground-mounted PV structures
    Function in the structure Presses two adjacent modules against the mounting structure

    Where is it used?

    • Ground-mounted solar power plants – for fastening solar modules to structure profiles.
    • Photovoltaic structures – as an intermediate clamping element between two modules.
    • Agricultural and industrial facilities – for installing ground-mounted PV systems.
    • Commercial solar power plants – for forming and fastening module rows.
    • During installation work – when an even gap between modules and reliable frame clamping are required.

    Practical installation example

    For example, when installing a ground-mounted solar module structure, the first module is fastened with an end clamp, while a middle clamp is used between the first and second module. It presses both adjacent module frames against the structure profile and helps maintain an even gap between the panels.

    Such clamps are used along the entire module row between each pair of adjacent modules. Correct selection and tightening of clamps is important for the stability of the entire structure and the safety of the modules.

    Advantages

    • Designed for ground-mounted PV structures – suitable for fastening solar modules in ground-mounted systems.
    • Middle fastening element – clamps two adjacent modules at the same time.
    • Helps maintain an orderly module row – installed between panels and helps form even gaps.
    • Suitable for professional installation – used in photovoltaic structure installation work.
    • Compact component – an important part of the structure that does not take up much space.
    • Convenient solution for module clamping – allows modules to be fastened to the mounting profile.

    Disadvantages / limitations

    • Not suitable for edge fastening of a module – end clamps are usually used at the edges.
    • Compatibility with the profile is required – it is necessary to check whether the clamp fits the specific Goomax or other mounting structure.
    • Not a standalone structure – it is only one component of a solar module mounting system.
    • Correct tightening is required – too weak or too strong tightening may affect fastening reliability.
    • The module frame height must be evaluated – the clamp must match the structural parameters of the solar modules being used.

    Safety and installation notes

    The solar module mounting clamp is a structural component, therefore before installation it is necessary to check compatibility with the solar modules, mounting profiles, bolts, nuts and the entire ground-mounted structure being used.

    • Use only according to the intended purpose of the structure – this clamp is intended for middle module fastening.
    • Check the module frame height – the clamp must match the frame dimensions of the specific solar modules.
    • Check compatibility with the profile – the clamp must fit the ground-mounted structure being used.
    • Follow the manufacturer’s installation instructions – correct tightening torque and fastening sequence are important.
    • Evaluate loads – wind, snow and structural loads must be evaluated by the installer or designer.

    Quick selection guide

    This is a suitable choice when a middle solar module clamp is required for a ground-mounted structure. It is used between two adjacent modules and helps press their frames against the mounting profile.

    Type
    Middle clamp
    Manufacturer
    Goomax
    Application
    Between modules
    System
    Ground-mounted PV structure
    Suitable when you need to:
    • fasten solar modules in a ground-mounted structure;
    • clamp two adjacent modules with one clamp;
    • form an orderly module row;
    • use a Goomax mounting system component;
    • replace or supplement solar module fastening components.
    Check before installation:
    • whether the clamp fits the specific mounting structure;
    • whether the module frame height corresponds to the clamp purpose;
    • whether suitable bolts and nuts are used;
    • whether the manufacturer’s tightening torque is followed;
    • whether a middle clamp, not an end clamp, is required in this position.
    Important reminder:
    This product is one component of the fastening system. To install a complete solar module structure, profiles, bolts, nuts, end clamps, support structure and other mounting components according to the project are additionally required.

    FAQ – frequently asked questions

    What is this middle clamp intended for?
    It is intended for fastening solar modules in ground-mounted structures, installing the clamp between two adjacent modules.
    Is this clamp used at the edge of a module?
    No. This is a middle clamp used between two modules. End clamps are usually used at the edges of the module.
    Is the clamp suitable for all solar modules?
    Before installation, the module frame height, mounting profile type and compatibility with the specific structure must be checked.
    Is this a complete fastening kit?
    No. This is one fastening component. A complete structure requires profiles, supports, bolts, nuts, end clamps and other components according to the project.
    Where is this clamp installed?
    It is installed between two adjacent solar modules, clamping their frames to the profile of the ground-mounted structure.
    Is it necessary to follow the tightening torque?
    Yes. Correct tightening torque is important so that the modules are securely fastened and their frame is not damaged.

    For neat and reliable fastening of solar modules

    The middle clamp is an important component of a ground-mounted solar module structure, used between two adjacent modules and helping to press them securely against the mounting profile.

    A correctly selected and installed clamp helps maintain an orderly module row, reliable fastening and structural stability in photovoltaic systems.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Alternative products

    Cable for solar modules | 1x4mm² | red | TYCO 3S072005040215 Cable for solar modules | 1x4mm² | red | TYCO 3S072005040215 Top seller  
    Cable for solar modules | 1x4mm² | red | TYCO 3S072005040215
    Code: 1-956298-6
    Price 0.98 € VAT incl.
    ( 0.81 € VAT excl. )
    Add to cart 
  • privacy policy

    Information