Indoor wall-mounted speaker | 30W | 8 Ohm | 190x150x300mm | white

Wall-mounted broadcast speaker – 30W / 60W, 8 Ω, 130 Hz-18 kHz, wooden enclosure

Wall-mounted broadcast speaker designed for clear reproduction of speech, background music and general audio in educational institutions, classrooms, shopping centres, offices, conference spaces and other indoor areas. The two-speaker design with 5.5" and 2.5" speaker units helps reproduce clear, natural and pleasant sound.

• 30 W rated power – suitable for voice announcements, teaching and background music.
• 60 W maximum power – for short-term audio signal peak loads.
• 97 dB sensitivity – for more efficient sound reproduction.
• 130 Hz-18 kHz frequency range – for clear speech and mid-frequency reproduction.
• 5.5" + 2.5" speaker system – for wider sound reproduction than a single-speaker design.
• Wall-mounted installation – for convenient installation in classrooms, offices and public spaces.
• Wooden enclosure – for a more solid construction and more aesthetic appearance.
• Overload protection – helps protect the speaker from excessive load.

• Classrooms and training rooms – for a teacher’s voice, lesson audio or announcements.
• Universities and educational institutions – for lecture halls, corridors and common areas.
• Shopping centres – for background music and information announcements.
• Offices – for meeting rooms, reception areas and common spaces.
• Conference halls – for speech, presentations and audio playback.
• Public indoor spaces – for general sound reinforcement and information delivery.

For example, in a classroom, two such speakers are mounted on the wall at the front or side of the room. They are connected to a compatible audio amplifier that transmits sound from the teacher’s microphone, computer or multimedia system.

This distributes sound more clearly and evenly, so speech, video lessons, presentations or announcements are heard better throughout the room.

For an educational institution: suitable for classrooms, lecture halls and training spaces where clear speech reproduction is important.

For an audio system installer: a practical wall-mounted 8 Ω speaker for low-impedance sound systems.

For an office or conference hall: helps reproduce speech, presentation audio and background music more clearly.

For retail or public spaces: can be used for information announcements and background sound reinforcement.

Before installation, it is necessary to make sure that the selected amplifier supports an 8 Ω load and that the total load of all connected speakers does not exceed the amplifier’s capabilities.

• Disconnect the amplifier power before connection.
• Use a speaker cable with a suitable cross-section.
• Observe polarity, especially when connecting several speakers.
• Do not exceed the 30 W rated power.
• Mount on a solid surface using suitable brackets.
• Protect from direct moisture if the outdoor protection level is not confirmed.
• Do not disassemble or repair it yourself if the device does not operate properly.

Quick selection guide

Choose a wall-mounted 30 W broadcast speaker when clear speech, background music or announcements are needed in a classroom, office, retail space or another indoor area.

For clear speech, announcements and background sound reinforcement

The 30 W wall-mounted broadcast speaker is a practical solution for educational institutions, classrooms, retail spaces, offices and public indoor areas where clear speech and music reproduction are important.

Thanks to its 8 Ω impedance, 97 dB sensitivity, 130 Hz-18 kHz frequency range, 5.5" and 2.5" speaker design, wooden enclosure and wall-mounted installation, this speaker is suitable for reliable everyday indoor sound reinforcement.