Products catalog

  • Industrial axial wall fan | 1.1 kW | 3×380 V | 950 rpm | 12000–18000 m³/h | aluminium alloy | IP66

    Code: ES-CFM111218

    Industrial axial wall fan 1.1 kW, 3×380 V, 950 rpm, 12000–18000 m³/h, 60–150 Pa, IP66, aluminium alloy housing and blades. For production halls, warehouses, farms and greenhouses.

  • Industrial axial wall fan | 1.1 kW | 3×380 V | 950 rpm | 12000–18000 m³/h | aluminium alloy | IP66

    Industrial axial wall fan with a 1.1 kW three-phase 380 V motor and aluminium alloy housing and blades. It delivers 12000–18000 m³/h at 60–150 Pa static pressure, and IP66 protection allows use in dusty and wet industrial environments.

    Key point:
    A high-capacity solution for production halls, warehouses, farms and greenhouses where tens of thousands of cubic metres of air per hour must be moved. The three-phase motor speed is best controlled with a frequency inverter.
    Airflow
    12000–18000 m³/h
    Power / voltage
    1.1 kW / 3×380 V
    Speed
    950 rpm
    Protection
    IP66

    We will help you set up speed and automatic control

    We will advise how to adjust this fan's speed and how to switch or control it automatically according to room conditions – humidity, temperature or CO₂ concentration. We will select a suitable speed controller, thermostat, humidity or CO₂ sensor and explain how to connect them.

    Contact us: tel. +370 658 01033 or e-mail info@elsprendimai.eu

    In your e-mail, briefly describe the situation: room purpose and size, fan model and what you want to control – speed, humidity, temperature or CO₂.

    Wholesale quantities: special prices for larger orders. State the required quantity in your e-mail and we will send you an individual offer.

    Operating principle

    The fan is installed in a prepared opening in a wall or partition. The three-phase 380 V, 50 Hz motor drives the aluminium alloy blades at 950 rpm and moves air along its axis.

    Operating at 60–150 Pa static pressure, the fan delivers 12000–18000 m³/h – the lower value corresponds to higher resistance, the higher value to free discharge. Housing and blades are electrophoretically coated, and IP66 protects against dust and powerful water jets.

    Why the 1.1 kW fan?
    High airflow with a reliable three-phase motor and corrosion-resistant aluminium construction – industrial ventilation and cooling without complex ductwork.

    Technical specifications

    Product type Industrial axial wall fan
    Code ES-CFM111218
    Power 1.1 kW
    Power supply 3-phase, 380 V, 50 Hz
    Airflow 12000–18000 m³/h
    Static pressure 60–150 Pa
    Speed 950 rpm
    Bearings Hydraulic
    Blades Aluminium alloy, electrophoretic coating
    Housing Aluminium alloy, electrophoretic coating
    Protection rating IP66

    Main functions

    • High airflow – 12000–18000 m³/h for large industrial volumes.
    • IP66 protection – suitable for dusty and wet environments, washable.
    • Aluminium construction – light and corrosion-resistant.
    • Three-phase motor – reliable long-term industrial operation.
    • Inverter speed control – airflow can be matched to demand to save energy.

    Where is it used?

    • Production halls and warehouses
    • Farms and livestock buildings
    • Greenhouses
    • Workshops and logistics centres
    • Process heat removal
    • Large commercial premises

    Use by need

    For farmers.
    High airflow for barns and greenhouses, resistant to moisture and dust.
    For manufacturers.
    Efficient removal of heat and polluted air from halls.
    For designers.
    Clear parameters: 1.1 kW, 380 V, 12000–18000 m³/h, 60–150 Pa, IP66.

    Practical application

    If a 5000 m³ hall overheats in summer, two 1.1 kW fans installed as exhaust on the end wall can remove up to 36000 m³ of air per hour. With a frequency inverter and temperature sensor, output is increased only when the temperature rises.

    Pros

    • 12000–18000 m³/h airflow
    • IP66 protection
    • Corrosion-resistant aluminium construction
    • Three-phase industrial motor
    • Can be controlled with a frequency inverter

    Cons / limitations

    • Requires a three-phase 380 V supply
    • No built-in speed control – frequency inverter recommended
    • May need an additional mounting frame, louvres or guard
    • Not suitable for small rooms

    Safety and installation notes

    • Installation and connection must be done by a qualified electrician.
    • Protect the motor with a circuit breaker or motor protection.
    • Check the direction of rotation – swap two phases if needed.
    • Fix to a solid structure to avoid vibration.
    • Install with a protective guard in accessible locations.
    • Before maintenance disconnect power and wait until the blades stop.

    Quick selection guide

    1.1 kW
    3×380 V
    12000–18000 m³/h
    IP66
    Suitable when you need:
    • to ventilate a large hall, warehouse or farm
    • to remove process heat
    • a fan for wet and dusty environments
    Check before use:
    • that a three-phase 380 V supply is available
    • that an opening and mounting can be made in the wall
    • that an air inlet is provided
    • how the speed will be controlled
    Important reminder: a three-phase fan’s speed is most efficiently controlled with a frequency inverter – we will help you choose one.

    FAQ

    What voltage is required?
    Three-phase 380 V, 50 Hz.
    What is the airflow?
    12000–18000 m³/h depending on resistance.
    Can the speed be adjusted?
    Yes, with a frequency inverter – we will help you choose one.
    Is it suitable for wet environments?
    Yes, protection rating IP66.
    What is it made of?
    Housing and blades – aluminium alloy with electrophoretic coating.
    What is its speed?
    950 rpm.

    Industrial axial fan 1.1 kW | 12000–18000 m³/h | IP66

    Industrial axial wall fan 1.1 kW, 3×380 V, 950 rpm, 12000–18000 m³/h, 60–150 Pa, IP66, aluminium alloy housing and blades. For production halls, warehouses, farms and greenhouses.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Shut-off damper for round air duct | for ventilation | air handling systems | D100 | silver | galvanized steel | 100USO
    Code: 04963

    Round duct shut-off damper, designed to shut off, restrict, or regulate airflow in round air ducts. The damper is used in supply, exhaust, or recirculation air systems where simple and efficient control of air movement within premises is required.

    Due to its galvanized steel construction, the product is resistant to corrosion, durable, and suitable for use in residential, commercial, and technical ventilation systems. Manual operation allows easy airflow adjustment without the need for an additional electric actuator or automation system. 

    Price 6.50 € VAT incl.
    ( 5.37 € VAT excl. )
    Supply air ventilation damper in wall | with G3 filter | ASA plastic wall outlet | D125 | 1m | white | 12,5TOV1-02
    Code: 09230

    Wall-mounted supply air vent D125 with a 1000 mm insulated duct, G3 filter and adjustable diffuser. Outdoor side – ASA plastic external wall outlet. Intended for controlled air inflow in rooms with forced exhaust.

    Price 30.65 € VAT incl.
    ( 25.33 € VAT excl. )
    Rotary deflector D100 | ball bearings | stainless steel | silver
    Code: 19471

    Stainless steel rotary deflector (wind turbine) D100 with ball bearings. Fits onto a D100 ventilation duct, extracts air without electricity and protects the duct from rain and snow.

    Price 85.06 € VAT incl.
    ( 70.30 € VAT excl. )
    Flexible aluminum air duct | for ventilation | ventilation systems | D100mm | 3m | white | LAO100B
    Code: 23033

    Flexible aluminium air duct - a reliable and universal solution for professional and residential ventilation systems. Designed to connect ventilation elements, fans, heat recovery components or other air distribution units.

    Due to its low weight, high flexibility and resistance to high temperatures, the duct ensures quick installation, tightness and long-term operation even in more demanding conditions. The white surface blends aesthetically in technical and visible installation areas. 

    Price 7.20 € VAT incl.
    ( 5.95 € VAT excl. )
  • privacy policy

    Information