Industrial LED lamp | E40 | 40W | 230V | 7500lm | 4000K | IP65 | equivalent (sodium vapor lamp 100W) | Philips
Code: 16355Price 41.15 € VAT incl.( 34.01 € VAT excl. )Philips CorePro TForce LED HID SON-T – an LED lamp designed as a direct replacement for high-intensity discharge (HID) lamps. It allows immediate reduction of energy consumption and maintenance costs, requires no major investments, and provides all the benefits of LED technology – long service life, low energy consumption, instant start, and environmental advantages.
Thanks to the E40 base and the same shape as SON-T HID lamps, the LED lamp can be easily replaced without additional modifications. The IP65 construction allows it to be used not only in indoor luminaires but also in outdoor lighting solutions.
-
Technical specifications
Base: E40
Power: 40 W (equivalent to ~100 W HID)
Luminous flux: 7,500 lm
Light color: 4000 K
Color Rendering Index (CRI): 70
Beam angle: 330°
Efficiency: 187 lm/W
Voltage range: 220–240 V, 50/60 Hz
Current: 178 mA
Power factor: 0.9
Nominal lifetime: 25,000 h
Switching cycles: 50,000
Energy class: B
Operating temperature: –30 °C to +45 °C
Maximum housing temperature: 49 °C
Weight: 0.157 kg
CE and RoHS compliance
Use in enclosed luminaires: YesFunctions
HID lamp replacement: specifically designed to replace SON-T lamps without additional adapters.
Energy saving: up to 60–70% lower electricity consumption compared to traditional HID.
Durability: 25,000 h lifetime reduces maintenance needs.
Reliability: reaches full brightness instantly (no warm-up time).
Environmental resistance: IP65 design suitable for outdoor use.
Versatility: suitable for both enclosed and open luminaires.
Applications
For home users: ideal for lighting private yards, driveways, farm buildings when replacing old HID lamps.
For engineers: a reliable alternative for infrastructure lighting – roads, streets, parks, parking lots.
For electricians: quick installation, as the lamp has the same size and base as SON-T HID. Suitable for enclosed luminaires, no additional retrofitting required.
For commercial sites: lighting warehouses, factories, logistics centers.
Pros
Direct HID replacement
Low energy consumption (187 lm/W)
Fast start, no flickering
Long lifetime – 25,000 h
Suitable for outdoor and indoor lighting (IP65)
CE and RoHS certified
Cons
Non-dimmable (cannot adjust brightness)
Limited CRI (70) – weaker color rendering compared to high-quality LED lamps
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.Lumen (lm) – unit of luminous flux: how much light a lamp or luminaire emits in total. Lux (lx) – illuminance: how much of that light falls on 1 m² of surface (1 lx = 1 lm/m²). Watts (W) only show power consumption – compare LED brightness by lumens.
How many lux does a room need?
Corridor, storeroom, basement 100–150 lx Living room, bedroom 100–300 lx Garage, warehouse 100–200 lx Kitchen, bathroom, desk 300–500 lx Office, computer workstation 500 lx Workshop, fine work 500–750 lx How to calculate the lumens you need
Required lumens ≈ illuminance (lx) × area (m²) ÷ 0.5
The 0.5 factor accounts for light absorbed by walls, ceiling and diffusers and for luminaires getting dirty over time. Example: 18 m² garage, 200 lx → 200 × 18 ÷ 0.5 = 7,200 lm. That is about three 150 cm T8 LED tubes of ~2,500 lm each.
This is an estimate. For an exact design (workplaces, production, public areas) use lighting calculation software, e.g. DIALux.
Recommended values are indicative, based on the principles of EN 12464-1 for workplace lighting.
This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
LED bulb E27 | PAR30 | 35W | 4000K | 2350-2800lm | HO-PAR30-35-WF-WCode: HO-PAR30-35-WF-WPrice 25.00 € VAT incl.( 20.66 € VAT excl. )












