Products catalog

Home/Product Catalog/Automation and Control Systems/Automation control accessories/Signal towers | beacons | modules | accessories/Assembled signal towers | LED | with buzzer
  • New item   Industrial signal tower light (traffic light) with push-button control box | Andon | 4 tiers R/Y/G/B | LED | Ø60 mm | 230 V EU plug | buzzer | IP53 | ONN-M4F

    Industrial signal tower light (traffic light) with push-button control box | Andon | 4 tiers R/Y/G/B | LED | Ø60 mm | 230 V EU plug | buzzer | IP53 | ONN-M4F

    Code: ESONN-M4F-4RYGB-EU
    Inquire about this item
    Price 93.24 € VAT incl.
    ( 77.06 € VAT excl. )
    Want another price? Suggest yours!

    Pre-assembled industrial LED signal tower (traffic light) for Andon systems, showing machine and workstation status. 4 tiers (red, yellow, green, blue) and push-button control box, AC 100–240 V supply via EU plug, steady or flashing light, 85/40 dB buzzer or silent mode, IP53.

  • Product description

    Industrial signal tower light (traffic light) with push-button control box | Andon | 4 tiers R/Y/G/B | LED | Ø60 mm | 230 V EU plug | buzzer | IP53 | ONN-M4F

    ONN-M4F is a pre-assembled, ready-to-use industrial LED signal tower (traffic light) with four colour tiers (red, yellow, green, blue) and a push-button control box. It plugs straight into a 230 V socket via an EU plug, and the operator shows the workstation status with a single press: all good, attention needed, or stoppage and help required, while the blue tier is free for an additional signal, e.g. a quality control call. It is the simplest way to display machine status and workstation state without an automation project.

    Key point:
    In production and warehousing, time is usually lost not because of the fault itself, but because nobody finds out about it in time. An Andon tower makes the problem visible from a distance: the supervisor or technician sees the colour and hears the signal, with no need to search for someone or make a phone call. Since everything is pre-assembled and powered from a standard socket, the system can be put into use the same day, without an electrician or controller programming.
    Signals
    4 tiers: red / yellow / green / blue
    Power supply
    AC 100–240 V, EU plug, 1.5 m cable
    Audible signal
    85 dB / 40 dB or off
    Light mode
    Steady or flashing, set per colour

    Operating principle

    The tower is supplied fully assembled: the LED tiers are mounted on a pole fixed to a control box with four coloured push buttons. The box is placed or fixed at the workstation, and the power cable with EU plug is connected to a 230 V socket. The built-in power supply converts mains voltage into a safe DC 24 V for the light modules.

    Each button corresponds to its own colour tier. The operator presses a button – the matching colour lights up, and if the audible signal is enabled, the buzzer sounds at the same time. DIP switches in the tower body, under the bottom LED module, set steady or flashing light separately for each colour, and for the buzzer – on/off, volume (85 dB or 40 dB) and continuous or intermittent sound. Factory setting: steady light with buzzer.

    The result is a clear status signal visible through 360°, which a supervisor, logistics or maintenance worker can spot from the other end of the hall. Response time is shortened and problem tracking becomes simpler.

    What makes ONN-M4F useful?
    It is a separate, stand-alone Andon point: no PLC, no additional power supply and no cabling to the distribution panel are needed. A socket near the workstation is enough – signalling can be installed in a few minutes and moved elsewhere when the line layout changes.

    Technical specifications

    Product type Industrial modular LED signal tower (traffic light) with push-button control box, for Andon systems
    Manufacturer ONN (Shenzhen Onn Semi-conductor Lighting)
    Model ONN-M4F-ANDON
    Number of tiers 4
    Colours Red (R), yellow (Y), green (G), blue (B)
    Control 4 push buttons on the control box (one per colour)
    Supply voltage AC 100–240 V
    Light module voltage DC 24 V (built-in power supply)
    Power 1.2 W per colour (up to 4.8 W with all 4 lit)
    Light mode Steady / flashing, set per colour (DIP switches)
    Audible signal Buzzer: 85 dB (loud) / 40 dB (quiet), continuous or intermittent, can be switched off
    Tier diameter Ø60 mm
    Control box dimensions 73 × 66 × 172 mm (4-button version)
    Power cable 1.5 m with EU plug
    Protection rating IP53
    Operating temperature -20 … +45 °C
    Materials ABS housing, PC (polycarbonate) lenses
    LED lifetime 50,000 h
    Visibility 360°
    Warranty 2 years
    Factory setting Steady light with buzzer
    Weight approx. 1.1 kg (net)
    Packaging Individual box for each tower; 12 pcs per carton

    Key functions

    • Four-colour status signal – green, yellow and red distinguish normal operation, need for attention and stoppage, while blue is used for an additional message.
    • Push-button control at the workstation – the operator reports a problem within a second, without a phone or radio.
    • Flashing or steady light – flashing can be set separately for each colour, e.g. red only, so urgent cases stand out from the general line background.
    • Adjustable sound 85 / 40 dB – loud mode for a noisy shop floor, quiet mode for an office or lab, or no sound at all.
    • Powered from a 230 V socket – EU plug and built-in power supply, no separate 24 V source required.
    • Factory assembled – ready-to-use set, installation takes a few minutes.
    • Long LED lifetime – 50,000 h, no lamp replacement during operation.

    Where is it used?

    • Production and assembly line workstations (Andon system)
    • Machine status indication: running, waiting, stopped, fault
    • Manual assembly, packing and quality control tables
    • Warehouse picking and dispatch areas
    • CNC machine and other equipment operator stations
    • Repair workshops and service centres – to show job status
    • Laboratories and test benches (quiet sound mode)
    • Help call points in service areas

    Use by user type

    Production manager / supervisor.
    Sees the status of all workstations at a glance and reacts to stoppages before they turn into downtime.
    Lean / production process engineer.
    Gets a simple Andon point for a pilot project without PLC and automation integration costs.
    Warehouse or service manager.
    Staff signal missing materials or a need for help without leaving their workstation.

    Practical application

    If an operator on the assembly line runs out of parts, he presses the yellow button – the logistics worker sees the yellow light from a distance and brings materials. If a machine stops, the operator switches on the red flashing signal with sound, and the technician arrives without having to search for the fault location. When the problem is solved, green is lit again. The blue button can be assigned, e.g., to calling quality control.

    Advantages

    • Plugs directly into a 230 V socket, no additional power supply
    • Assembled and ready to use out of the box
    • Integrated buttons, so control happens right at the workstation
    • Flashing set separately for each colour
    • Sound settings: 85 / 40 dB, continuous or intermittent, or off
    • Low power consumption – 1.2 W per colour
    • 50,000 h LED lifetime

    Disadvantages / limitations

    • IP53 – intended for indoor use, not for outdoor conditions or wash-down areas
    • Stand-alone device: no outputs to PLC, SCADA or MES systems
    • Brightness is not adjustable
    • Operating temperature up to +45 °C – not suitable for hot zones near furnaces or dryers
    • Requires a 230 V socket near the workstation

    Safety and installation notes

    • The DIP switches are located in the tower body – unscrew the bottom LED module to access them. Do this only with the plug removed from the socket.
    • Route the power cable so that it cannot be damaged by moving mechanisms, forklifts or sharp edges.
    • Connect to an earthed socket protected by a circuit breaker and a residual current device (RCD).
    • Do not use outdoors, under direct water jets or in areas where condensation may occur.
    • Position the tower so that the signal is visible from the main traffic directions and not blocked by shelving or equipment.
    • Do not open the power supply unit – it contains mains voltage.

    Quick selection guide

    4 tiers R/Y/G/B
    AC 100–240 V | EU plug
    Ø60 mm | 360°
    85 / 40 dB | IP53
    Suitable when you need:
    • to deploy Andon signalling quickly without an automation project
    • to let operators report a problem or need for help themselves
    • a signal that is visible and audible in a noisy room
    Check before use:
    • whether there is a 230 V socket near the workstation (1.5 m cable)
    • whether the environment is within IP53 and -20 … +45 °C limits
    • whether 4 colours are enough or more states are needed
    Important reminder: this tower is an informational signalling device. It does not replace an emergency stop circuit, machine safety systems or a fire alarm.

    FAQ

    Is an electrician needed for connection?
    No, the tower plugs into a standard 230 V socket via an EU plug.
    Can the sound be switched off?
    Yes, DIP switches turn the sound off or select loud (85 dB) or quiet (40 dB), continuous or intermittent mode.
    Can the light flash?
    Yes, DIP switches set steady or flashing light separately for each colour.
    Can the tower be connected to a PLC?
    No, this version is controlled by the buttons on the control box and has no control inputs for automation.
    Is it suitable for outdoor use?
    No, the IP53 protection rating is intended for indoor use.
    Can the configuration be adapted to your needs?
    Yes, if required we adapt the tower to your needs: 1–5 tiers, colours (R/Y/G/B/W), pole height 240 or 375 mm, diameter Ø60 or Ø70 mm, with or without buzzer, EU/UK/US plug.

    Industrial signal tower (traffic light) ONN-M4F | Andon | 4 tiers R/Y/G/B | 230 V EU plug

    Pre-assembled industrial LED signal tower (traffic light) for Andon systems with push-button control box, steady or flashing mode and 85/40 dB buzzer. Plugs into a 230 V socket and immediately shows machine and workstation status in production, warehouses or service workshops.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Subscribtion to new arrivals

    privacy policy

    Information