Products catalog

Home/Product Catalog/Lighting solutions for industrial | commercial | residential | outdoor environments | accessories/Commercial lighting/Moisture-resistant hermetic luminaires | enclosures/Moisture-resistant luminaires | hermetic
  •   Industrial waterproof LED light | garage type | with motion sensor | 36W | 165-240V | 4000-4500K | 100lm/W | 1230x83x48mm | surface-mounted | IP65 | TRIPROOF-003 | 4772124003712
      Industrial waterproof LED light | garage type | with motion sensor | 36W | 165-240V | 4000-4500K | 100lm/W | 1230x83x48mm | surface-mounted | IP65 | TRIPROOF-003 | 4772124003712 1

    Industrial waterproof LED light | garage type | with motion sensor | 36W | 165-240V | 4000-4500K | 100lm/W | 1230x83x48mm | surface-mounted | IP65 | TRIPROOF-003 | 4772124003712

    Code: TR-003-36
    Barcode: 4772124003712
    Inquire about this item
    Price 18.63 € VAT incl.
    ( 15.40 € VAT excl. )
    Want another price? Suggest yours!

    Industrial sealed LED light is designed for garages, warehouses, corridors, workshops, stairwells, technical and utility rooms where moisture- and dust-resistant lighting is required. The integrated motion sensor switches the light on when movement is detected, helping reduce energy consumption in areas that are not used continuously. 

  • Product description

    Sealed LED Light with Motion Sensor – 36W, 4000K, IP65, 1230 mm, for Garages and Technical Rooms

    Industrial sealed LED light is designed for garages, warehouses, corridors, workshops, stairwells, technical and utility rooms where moisture- and dust-resistant lighting is required. The integrated motion sensor switches the light on when movement is detected, helping reduce energy consumption in areas that are not used continuously.

    Main idea:
    This light is intended for automatic general lighting control in places where good visibility, reliable IP65 protection and switching the light on only when movement is detected are important.
    Power
    36W ±5%
    Light color
    4000K
    Protection
    IP65
    Motion sensor
    120°

    Operating principle

    The light is connected to a 220-240V AC electrical network and mounted on the ceiling or wall. The integrated motion sensor monitors the environment at a 120° angle and, when movement is detected, switches the light on for a set period of time.

    After the last detected movement, the light remains on for approximately 35-55 seconds and then automatically switches off or enters standby mode according to the device’s operating logic. This solution is especially convenient in passage areas, garages, warehouses and other rooms where lighting is not required all the time.

    When is it worth choosing a light with a motion sensor?
    This solution is especially useful in rooms where people move for a short time: garages, corridors, storage rooms, stairwells, technical areas or entrances. The light turns on only when needed, reducing unnecessary electricity consumption.

    Technical parameters

    Product type Sealed LED light with motion sensor
    Power 36W ±5%
    Rated voltage 220-240V AC
    Frequency 50 / 60 Hz
    Light color 4000K
    Luminaire efficiency 100 lm/W ±5%
    Approximate luminous flux Approx. 3600 lm
    Beam angle 120°
    Color rendering index Ra ≥80
    Protection class IP65
    Power factor >0.9
    Dimming No
    Motion sensor detection angle 120°
    Motion sensor delay time 35-55 s
    Lighting threshold Specified values around 50-100 lx – it is recommended to confirm the exact sensor operating logic before ordering
    Installation location On ceiling or wall
    Dimensions 1230 x 83 x 48 mm
    Housing material Polycarbonate
    Diffuser material Polycarbonate (PC)
    Housing color White
    Connection type Cable, 2-pole connection

    Main functions

    • Motion detection – the light turns on when movement is detected within the 120° zone.
    • Automatic switch-off – after approximately 35-55 s without movement.
    • 4000K neutral white light – suitable for garages, technical rooms and work areas.
    • Approx. 3600 lm luminous flux – for general room lighting.
    • IP65 sealing – protection against dust and water jets.
    • 120° beam angle – for wide and more even light distribution.
    • Polycarbonate housing and diffuser – lighter construction for technical areas.
    • Surface-mounted installation – convenient fixing to ceiling or wall.

    Where is it used?

    • Garages – for lighting parking, maintenance and passage areas.
    • Warehouses – for shelf aisles, utility and technical rooms.
    • Workshops – in work and tool storage areas.
    • Corridors and stairwells – for automatic lighting based on movement.
    • Basements and storage rooms – in areas used only periodically.
    • Technical rooms – boiler rooms, electrical rooms, equipment and maintenance areas.
    • Utility and industrial buildings – where a more sealed luminaire is required.

    Practical usage example

    For example, the light is mounted on a garage ceiling above a parking space or passage area. When a person enters or a car drives in, the sensor detects movement and automatically switches on the light.

    After leaving the area, the light switches off after the set delay time, so there is no need to look for a switch and electricity consumption is reduced when the garage or room is empty.

    Use according to need

    For an electrician: a convenient surface-mounted light with an integrated motion sensor, suitable for ceiling or wall installation in technical and more humid areas.

    For a building administrator: a solution for passage and utility rooms where automatic light switching helps reduce electricity consumption.

    For a garage owner: suitable for garages, workshops, storage rooms or basements where bright and automatically operating lighting is required.

    For an industrial specialist: can be used in warehouses, technical maintenance rooms, production areas and other places where IP65 sealing is important.

    Advantages

    • Integrated motion sensor – light turns on only when movement is detected.
    • IP65 protection – suitable for dustier and more humid rooms.
    • 36W power – sufficient for general lighting in many technical areas.
    • Approx. 3600 lm luminous flux – bright neutral white light.
    • 4000K color temperature – more comfortable for work and orientation.
    • 120° beam angle – wide light distribution.
    • Ra ≥80 – suitable color recognition in everyday work areas.
    • Surface-mounted installation – easier installation in garages, workshops and technical rooms.
    • Power factor >0.9 – more efficient use of electrical energy.

    Disadvantages / limitations

    • No dimming function – luminous flux is not adjustable manually or via 0-10V control.
    • Motion sensor operating time is limited – the specified delay is approximately 35-55 s.
    • The sensor detection zone depends on the installation location – obstacles, height and direction of movement may affect operation.
    • 2-pole connection – the specific wiring diagram must be checked before installation.
    • The lighting threshold should be confirmed – the 50-100 lx values provided in the specification are not fully clearly described.

    Safety and installation notes

    The light must be installed according to electrical installation requirements and the specific manufacturer’s wiring diagram. The IP65 protection level remains valid only when cable entries are properly sealed and the housing is correctly installed.

    • Installation must be carried out by a qualified electrician.
    • Before installation work, the power supply must be disconnected.
    • Check that the mains voltage is 220-240V AC.
    • Mount the light on a solid surface suitable for its weight and operating conditions.
    • Cable entries must be properly sealed to maintain IP65 sealing.
    • The motion sensor zone must be directed toward the actual movement path.
    • Before final installation, it is recommended to check the sensor sensitivity, delay and lighting threshold.
    • Do not use a damaged light or cable.

    Quick selection guide

    Choose a sealed LED light with motion sensor when you need automatically controlled 36W lighting for a garage, workshop, warehouse, corridor or technical room. It is especially useful where the room is used only periodically.

    Power
    36W
    Light color
    4000K
    Sealing
    IP65
    Sensor
    120° / 35-55 s
    Suitable when you need:
    • automatic garage or warehouse lighting;
    • an IP65-class light for technical or more humid rooms;
    • neutral 4000K lighting for a work area;
    • a light with an integrated motion sensor;
    • surface-mounted installation on ceiling or wall.
    Check before ordering:
    • whether the 1230 mm long light fits the installation location;
    • whether 4000K neutral white light is required;
    • whether approximately 3600 lm luminous flux is sufficient;
    • whether the sensor’s 120° detection angle covers the intended movement zone;
    • whether automatic rather than continuous lighting is required;
    • whether the specific installation location allows IP65 sealing to be maintained.
    Important reminder:
    The effectiveness of the motion sensor depends on installation height, obstacles, direction of movement and ambient lighting. Before final installation, it is recommended to check whether the sensor detection zone and light activation threshold match the specific room.

    FAQ – Frequently Asked Questions

    Does the light have a motion sensor?
    Yes, the light has an integrated 120° motion sensor that automatically switches on the light when movement is detected.
    How long does the light stay on after motion is detected?
    According to the provided specification, the light delay time is approximately 35-55 seconds.
    Is the light suitable for a garage?
    Yes. Due to its 36W power, 4000K light, IP65 protection and motion sensor, it is suitable for garages, workshops, warehouses and technical rooms.
    Can the light be mounted on a wall?
    Yes, the light is intended for surface-mounted installation on the ceiling or wall.
    Is the light dimmable?
    No. According to the provided specification, the light does not have a dimming function.
    What is the approximate luminous flux?
    With 36W power and 100 lm/W efficiency, the approximate luminous flux is about 3600 lm.

    Automatic IP65 Lighting for Garages and Technical Areas

    The sealed 36W LED light with motion sensor is a practical solution for garages, workshops, warehouses, corridors, stairwells and other periodically used rooms.

    Thanks to 4000K neutral white light, approximately 3600 lm luminous flux, IP65 protection, 120° motion sensor and 35-55 s delay, the light helps ensure better visibility and more economical electricity use in daily operation.

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.

  • Alternative products

  • Subscribtion to new arrivals

    privacy policy

    Information