Industrial weatherproof LED luminaire | garage type | 30W | 230V | 4000K | 140lm/W | 600mm | surface-mounted | IP66 | TRI-PROOF

LED weatherproof luminaire | 600 mm | 30 W | 140 lm/W | ~4200 lm | 4000 K | IP66 | IK10

Professional 600 mm LED weatherproof luminaire designed for industrial, technical, storage, garage, parking, production and other demanding indoor and outdoor areas. 30 W power and declared luminous efficacy of 140 lm/W correspond to approximately 4200 lm calculated luminous flux. Aluminium housing, IP66 protection, IK10 mechanical resistance, CRI >83 and PF >0.95 are suitable for professional and intensive operation.

The main advantage of this luminaire is the combination of high 140 lm/W efficiency, IP66 protection and IK10 mechanical resistance. It is intended for locations where a conventional indoor luminaire may be exposed to excessive dust, moisture or mechanical impact. A 0.5 m connection cable attached at one end and included surface-mounting accessories simplify installation.

Luminous efficacy indicates how much luminous flux is produced from one watt of electrical power. In this case: 30 W × 140 lm/W = approximately 4200 lm. This is a calculated value based on the declared 140 lm/W efficiency.

• IP6X – complete protection against dust ingress.
• IPX6 – protection against powerful water jets.
• Suitable for dusty, humid and more demanding technical environments.
• Can be used in indoor and outdoor areas provided the installation conditions comply with the product's intended use and electrical installation requirements.
• IP66 does not mean protection against continuous immersion in water.

IK10 is a high mechanical impact resistance class, making the luminaire suitable for areas with a greater risk of accidental impact or mechanical stress. This is particularly relevant in garages, parking areas, warehouses, production and industrial premises, technical corridors and similar environments.

The aluminium housing provides mechanical strength and helps dissipate heat generated by the LED components and power supply. This is important for stable long-term operation of the LED components and the luminaire.

• Industrial and production premises.
• Warehouses and logistics centres.
• Garages and technical rooms.
• Indoor and outdoor parking areas.
• Corridors and technical passageways.
• Workshops and repair areas.
• Commercial and public areas.
• Construction sites and industrial zones.
• Humid or heavily dusty areas where IP66 protection is required.
• Areas where higher IK10 mechanical resistance is important.

A power factor of PF >0.95 indicates a high ratio between active and apparent power. This is particularly relevant in professional installations where many luminaires are installed and efficient electrical network loading is important.

• The required number of luminaires should be determined according to room or area geometry, mounting height and required illuminance in lx.
• The ~4200 lm luminous flux is calculated from the declared 140 lm/W efficiency.
• The luminaire is not dimmable.
• Power is fixed at 30 W.
• Colour temperature is fixed at 4000 K.
• IP66 does not mean protection against continuous immersion in water.
• IK10 increases resistance to mechanical impact, but the luminaire must still be installed safely and according to its intended use.
• A professional lighting calculation is recommended for professional projects.

1. Disconnect the electrical supply before installation.
2. Select the mounting location according to the required illuminated area and environmental conditions.
3. Use the included surface-mounting accessories.
4. Mount the luminaire on a mechanically suitable and sufficiently strong surface.
5. Connect the electrical supply using the 0.5 m cable attached at one end and comply with applicable electrical installation requirements.
6. When installing in humid or outdoor environments, maintain the electrical connection sealing required for IP66 protection.
7. Before switching on, check the mounting, electrical connections and cable protection.

LED weatherproof luminaire | 600 mm | 30 W | 140 lm/W | ~4200 lm | 4000 K | IP66 | IK10

Compact professional LED weatherproof luminaire with 30 W power, high 140 lm/W efficiency and approximately 4200 lm calculated luminous flux. 4000 K neutral white light, Ra >83, PF >0.95, aluminium housing, IP66 protection and IK10 mechanical resistance are suitable for warehouses, garages, production, parking, technical and other demanding indoor and outdoor areas. The luminaire has a 0.5 m connection cable, included surface-mounting accessories, a stated lifetime of up to 50,000 hours and a 5-year warranty.