Industrial weatherproof LED luminaire | garage type | 60W | 170–250V | 4000K | 140lm/W | 1200mm | dual-end wiring | surface-mounted | IP65 | TRI-PROOF

LED weatherproof luminaire | 1.2 m | 60 W | 140 lm/W | 4000 K | IP65 | IK08 | dual-side connection

1.2 m LED weatherproof luminaire designed for warehouses, production areas, technical rooms, garages, workshops, commercial premises and other general-purpose indoor areas. The combination of 60 W power and 140 lm/W luminous efficacy provides an estimated luminous flux of approximately 8,400 lm. 4000 K neutral white light, wide 180° beam angle, IP65 protection and IK08 mechanical resistance are suitable for more demanding operating conditions. Dual-side connection makes luminaire layout and cable routing easier in linear lighting systems.

This 60 W LED luminaire is intended for efficient general lighting of technical and commercial premises. 140 lm/W efficiency provides high luminous output from relatively low installed power, while dual-side connection gives greater flexibility when designing longer lighting lines. IP65 and IK08 ratings improve suitability for dusty, more humid indoor zones and areas with increased risk of mechanical impact.

The supply cable can be connected from either side of the luminaire. This provides greater installation flexibility when luminaires are mounted in rows, when cables are routed along a room, or when the connection side needs to match the existing electrical installation.

Luminous efficacy indicates how much luminous flux is produced from one watt of electrical power. At 140 lm/W: 60 W × 140 lm/W = approximately 8,400 lm. This is especially relevant in facilities where lighting operates for many hours per day and energy consumption is important.

• IP6X – protection against dust ingress into the housing.
• IPX5 – protection against water jets.
• IK08 – increased resistance to mechanical impact.
• Suitable for warehouses, workshops, garages and other more demanding indoor premises.
• IP65 does not mean protection against immersion in water.

Dual-side connection allows the more convenient cable entry side to be selected. This design is particularly practical when installing several luminaires in one line, in corridors, garages, warehouses, production areas or other long zones.

• Warehouses and logistics areas.
• Production and industrial premises.
• Garages and enclosed parking zones.
• Workshops and technical rooms.
• Retail and storage areas.
• Corridors and passageways.
• Utility and general-purpose rooms.
• More humid or dusty indoor zones where IP65 protection is required.

A power factor of PF >0.9 indicates a good ratio between active and apparent power. This is particularly relevant in commercial and industrial facilities where many luminaires are installed simultaneously.

• The required number of luminaires should be determined according to room geometry, mounting height and required illuminance in lx.
• The 180° beam angle is intended for wide light distribution, so spacing between luminaires should be considered.
• Dual-side connection provides more options when selecting the cable entry direction.
• The luminaire is not dimmable.
• The colour temperature is fixed at 4000 K.
• The power is fixed at 60 W.
• A professional lighting calculation is recommended for project design.

1. Disconnect the electrical supply before installation.
2. Select the luminaire location according to the required illuminated area.
3. Select the more convenient supply cable connection side.
4. Mount the luminaire on a mechanically suitable ceiling surface.
5. Carry out electrical connection in accordance with applicable electrical installation requirements.
6. Maintain the sealing of cable entries and housing required for IP65 protection.
7. Before switching on, check the mounting, electrical connections and housing closure.

LED weatherproof luminaire | 1.2 m | 60 W | 140 lm/W | 4000 K | IP65 | IK08

Efficient 1.2 m LED weatherproof luminaire with 60 W power, 140 lm/W luminous efficacy and approximately 8,400 lm calculated luminous flux. 4000 K neutral white light, CRI ≥80, wide 180° beam angle, IP65 and IK08 protection are suitable for warehouses, garages, workshops, production and technical premises. Dual-side connection simplifies cable routing and installation in lighting lines, while the rated lifetime of up to 40,000 hours and 20,000 on / off cycles is intended for long-term operation.