Industrial weatherproof LED luminaire | garage type | 80W | 230V | 4000K | 140lm/W | 1500mm | surface-mounted | IP66 | TRI-PROOF

Sealed LED Luminaire | 80 W | 140 lm/W | ~11,200 lm | 4000 K | 1500 mm | IP66 | IK10

High-efficiency 80 W linear LED luminaire designed for general lighting of warehouses, production areas, workshops, garages, technical zones, sports halls and other large spaces. An efficacy of 140 lm/W at a nominal power of 80 W corresponds to a calculated luminous flux of approximately 11,200 lm. 4000 K neutral white light is suitable for working environments, IP66 provides a high level of protection against dust and powerful water jets, while the IK10 housing is designed for increased mechanical loads.

This 1500 mm LED luminaire is designed for professional general lighting and combines high 140 lm/W efficiency, IP66 protection and IK10 mechanical resistance. The 80 W power rating is suitable for larger work and technical areas, while the aluminium housing and included surface-mounting accessories simplify installation.

High luminous efficacy allows a large amount of light to be produced from 80 W of electrical power. This is particularly relevant in warehouses, production areas and other spaces where lighting operates for many hours and both energy consumption and sufficient general illumination are important.

140 lm/W means approximately 140 lumens of luminous flux for each watt of electrical power consumed. At 80 W, the calculated nominal luminous flux is approximately 11,200 lm. This level of efficiency is particularly relevant in commercial, industrial and warehouse areas where lighting operates for long periods.

The 4000 K colour temperature produces neutral white light suitable for workspaces, technical, production, warehouse and sports facilities. A CRI ≥83 provides suitable differentiation of object and surface colours in everyday working environments.

The IP66 rating means that the luminaire housing is fully protected against dust ingress and resistant to powerful water jets. This protection is particularly relevant in warehouses, production areas, workshops, technical rooms and other environments where dust or increased humidity may be present. IP66 does not mean protection against continuous immersion in water.

IK10 is a high mechanical impact resistance rating, providing better protection against accidental mechanical impacts than luminaires with lower IK ratings. This is an important advantage in production, warehouse, garage and other technical environments.

The aluminium housing provides mechanical rigidity and helps dissipate heat generated by the LED components and power supply. This is important for long-term operation and stable performance in technical environments.

• 80 W nominal LED power.
• 140 lm/W luminous efficacy.
• Approx. 11,200 lm calculated nominal luminous flux.
• 4000 K neutral white light.
• CRI ≥83.
• PF >0.95.
• IP66 protection against dust and powerful water jets.
• IK10 mechanical impact resistance.
• 200–240 V AC, 50/60 Hz supply.
• Aluminium housing.
• 1500 mm linear construction.
• 0.5 m power cable at one end.
• Surface-mounting accessories included.
• Rated operating life of 50,000 hours.

The 1500 mm construction distributes light over a larger linear area and is particularly suitable for long work areas, warehouse aisles, production lines and other elongated spaces. It helps create more continuous general lighting when several luminaires are installed in a row.

The 80 W power and calculated luminous flux of approximately 11,200 lm alone do not determine the illuminance in lux at a particular workplace. Lighting design should consider room area, mounting height, luminaire layout, surface reflectance and the required lighting level for the specific work zone.

• Electrical connection work must be performed by a qualified specialist.
• Disconnect the power supply before installation or maintenance.
• The luminaire must be securely fixed to the mounting surface.
• Before connection, check that the power supply is within 200–240 V AC, 50/60 Hz.
• Use the supplied mounting accessories or suitable fixings for the specific mounting surface.
• Do not cover the luminaire with materials that may obstruct heat dissipation.
• IP66 does not allow continuous immersion of the luminaire in water.
• Ensure proper protection of cable entries and electrical connections during installation.

Sealed LED Luminaire | 80 W | 140 lm/W | 4000 K | IP66 | IK10

80 W linear LED luminaire designed for professional lighting of technical and larger work areas. 140 lm/W efficacy corresponds to approximately 11,200 lm calculated luminous flux, while 4000 K neutral white light, IP66 protection, IK10 mechanical resistance, CRI ≥83, PF >0.95 and the robust 1500 mm aluminium housing make it suitable for warehouses, production areas, garages, workshops and technical zones.