Industrial weatherproof LED luminaire | garage type | with 3 h emergency module | 40W | 230V | 4000K | 140lm/W | 1200mm | surface-mounted | IP66 | TRI-PROOF

LED weatherproof luminaire with emergency module | 1200 mm | 40 W | 140 lm/W | 5600 lm | 4000 K | IP66 | IK10 | 3 h

Professional 1.2 m LED weatherproof luminaire with an integrated emergency module, designed for warehouses, production areas, technical rooms, garages, corridors, logistics centres and other demanding applications. 40 W power, 140 lm/W luminous efficacy and 5600 lm luminous flux provide efficient general lighting, while in the event of a mains power failure the emergency module allows the luminaire to operate for up to 3 hours. IP66 protection, IK10 mechanical resistance and an aluminium housing are designed for demanding operating conditions.

This model combines efficient 40 W general LED lighting and an emergency mode with up to 3 hours of operation in one housing. It is a practical solution for facilities where lighting must be maintained for safe movement, orientation or evacuation if the main power supply fails. IP66 and IK10 additionally increase suitability for demanding technical and industrial environments.

The integrated emergency module is designed to maintain lighting when the main power supply fails. Up to 3 hours of operation is particularly relevant in corridors, passageways, technical areas, warehouses, production facilities and other locations where orientation or safety lighting is required during a power outage.

A 3-hour emergency operating time does not mean that the full 5600 lm luminous flux of normal operating mode is maintained during emergency operation.

Luminous efficacy indicates how much luminous flux is produced from one watt of electrical power. In this case: 40 W × 140 lm/W = 5600 lm.

• IP6X – complete protection against dust ingress into the housing.
• IPX6 – protection against powerful water jets.
• Practical for dusty, humid and demanding technical environments.
• IP66 does not mean protection against continuous immersion in water.
• The housing and electrical connections must remain properly sealed during installation.

IK10 is a high mechanical impact resistance class. This is an important advantage in garages, parking areas, warehouses, production facilities, technical corridors and other areas where there is a greater risk of accidental mechanical impact.

The aluminium housing provides mechanical strength and helps dissipate heat generated by the LED components and electronics. This is important for stable and long-term operation of the luminaire.

• Warehouses and logistics centres.
• Production and industrial premises.
• Garages and parking areas.
• Corridors and technical passageways.
• Evacuation and safe movement areas.
• Technical and utility rooms.
• Retail and service facilities.
• Loading, storage and transport areas.
• Humid or dusty locations where IP66 protection is required.
• Areas where increased IK10 mechanical resistance is important.

• 3 h indicates the emergency operating duration, not operation at full output.
• Before using the luminaire as compliant emergency escape lighting, project requirements and required illuminance must be assessed.

• The required number of luminaires should be determined according to room geometry, mounting height and required illuminance in lx.
• 5600 lm is the rated luminous flux in normal operating mode.
• The luminaire is not dimmable.
• Power is fixed at 40 W.
• Colour temperature is fixed at 4000 K.
• IP66 does not mean protection against immersion in water.
• A separate lighting calculation is recommended for professional or emergency escape lighting.

1. Disconnect the main electrical supply before installation.
2. Select the mounting location according to the required normal and emergency lighting.
3. Mount the luminaire on a mechanically suitable and sufficiently strong surface.
4. Carry out the electrical connection according to the emergency module wiring diagram.
5. Ensure that power supply and charging of the emergency module are connected according to the manufacturer's wiring diagram.
6. When installing in a humid environment, maintain the sealing of connections and cable entries required for IP66 protection.
7. After installation, check normal operation and simulate a mains power failure to verify emergency mode activation.

LED weatherproof luminaire with emergency module | 1200 mm | 40 W | 5600 lm | 4000 K | IP66 | IK10 | 3 h

Professional 1.2 m LED weatherproof luminaire with 40 W power, 5600 lm luminous flux and 140 lm/W efficiency. 4000 K neutral white light, CRI ≥83, PF >0.95, IP66 protection, IK10 mechanical resistance and an aluminium housing are suitable for warehouses, production facilities, garages, corridors, technical and other demanding areas. The integrated emergency module can provide lighting for up to 3 hours if the main power supply fails, making the luminaire particularly practical in facilities where both general and backup safety lighting are important.