Access Panel | Floor Inspection Hatch for Basements | 600x600x50mm | Aluminium Profile | RDL6060FL
Code: 22964Price 761.33 € VAT incl.( 629.20 € VAT excl. )Floor inspection doors are a practical and aesthetic solution that ensures convenient and safe access to engineering systems such as heating units, water meters, valves, pipelines, or other technical devices located beneath the floor. The doors are installed flush with the floor surface, making them blend seamlessly with the surroundings, while the aluminum construction provides lightness and durability.
-
Access Panel | Floor Inspection Hatch for Basements | 600x600x50mm | Aluminium Profile | RDL6060FL
RDL6060FL – 600 × 600 mm floor hatch for basements and service voids with an aluminium profile frame, a lock and two gas struts that ease lifting of the lid and hold it open. Installed flush with the floor and covered with the floor finish.
Key point:
A larger floor hatch with tiles or laminate on the lid is heavy – without support it is awkward and unsafe to lift. A 600 × 600 mm opening suits a heating substation or a water service entry in a basement, and the gas struts make opening controlled.Dimensions
600 × 600 mm, depth 50 mmLifting
2 gas strutsSecurity
with lockFloor finish
tiles, laminate, etc.How it works
The frame is recessed into the floor flush with the final finish and fixed to the substrate.
The lid is prepared for a floor finish – tiles, laminate or other – so the closed hatch blends with the floor.
Once unlocked, the lid is lifted, and two gas struts reduce the force required and hold the lid open while work is carried out below.
Why choose RDL6060FL?
It makes the entrance to a basement or service pit part of the floor rather than a separate cover. Gas struts and a lock make the 600 × 600 mm hatch safer for everyday use.Technical specifications
Product type Floor access hatch with gas struts Code / model 22964 / RDL6060FL Dimensions 600 × 600 mm Depth 50 mm Frame material Aluminium profile Colour Silver Installation Recessed into the floor Lid lifting 2 gas struts, hold the lid open Security With lock Surface preparation For floor finish: tiles, laminate, etc. Key features
- Two gas struts – the lid lifts more easily and stays open.
- Lock – protection against accidental opening, important where there are children in the home.
- Lid for floor finish – the hatch continues the floor pattern.
- Aluminium frame – corrosion-resistant in damp basements.
- 600 × 600 mm opening – convenient for servicing and access down.
Applications
- Basements and service pits in private houses
- Boiler rooms and heating substations below floor level
- Water service entries and metering points
- Indoor pump stations and drainage sumps
- Access to heating and water installations in apartment buildings
- Underground service voids in commercial premises
Use by role
Private homeowner.
The basement entrance remains almost invisible in the floor.Heating system installer.
The installation can be reached with tools, and the lid stays open by itself.Apartment building manager.
The lock restricts access to shared building services.Practical example
If the water service entry and meter assembly of a private house are in a service pit under the hallway floor, a 600 × 600 mm hatch allows access down to service the installation, while the gas struts hold the lid open.Advantages
- Gas struts ease lifting
- With lock
- Covered with the floor finish
- Aluminium frame does not corrode
- Suitable for residential and commercial premises
Disadvantages / limitations
- Load class not stated in the specification – not for vehicle traffic areas
- Must be accurately levelled with the floor during installation
- A heavy finish on the lid increases the lifting force
- Not watertight – not intended for water pressure
Safety and installation notes
- Guard or supervise the open hatch – an open floor opening is a fall hazard
- Do not leave the lid open unattended when there are children in the home
- Before installation, make sure the substrate around the opening can carry the frame and the load
- Do not overload the lid with a heavy finish – the struts may no longer hold it
Quick selection guide
600 × 600 mm50 mm depth2 gas strutswith lockfor tiles / laminateSuitable when you need:- a basement or service pit entrance in the floor
- easy lifting of a large lid
- protection against accidental opening
Check before use:- opening and frame dimensions
- floor build-up height (at least 50 mm)
- weight of the finish on the lid
Important: the hatch is not fire-rated, not watertight and not intended for vehicle loads – it does not replace an external manhole cover.FAQ
What are the gas struts for?
They ease lifting of the lid and hold it open.Is it lockable?
Yes, the hatch has a lock.What finish can be laid on the lid?
Tiles, laminate and similar floor finishes.What floor depth is required?
The hatch depth is 50 mm.Is it suitable for outdoor use?
The specification covers indoor floors; for external chambers choose composite manhole covers.Can the closed hatch be walked on?
Yes, in normal indoor areas; the load class is not stated, so do not place heavy equipment on it.Access Panel | Floor Inspection Hatch for Basements | 600x600x50mm | Aluminium Profile | RDL6060FL
RDL6060FL – 600 × 600 mm floor hatch for basements and service voids with an aluminium frame, a lock and two gas struts, covered with tiles or laminate and installed flush with the floor.
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.ManufacturerThis product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Duct centrifugal fan El-Turbo-D 125P | D125 | 340 m³/h | 64 W | 230 V | 310 Pa | galvanized steel | grey | Eltdad-125 PCode: Eltdad-125 PDuct centrifugal fan El-Turbo-D 125P (Eltdad-125 P): D125, up to 340 m³/h, 310 Pa, 64 W, 230 V.
Price 134.31 € VAT incl.( 111.00 € VAT excl. )Radial scroll-housing fan | steel | 230V | D140 | 120×230×190mm | enlarged stator | silver | Turbo Classic SI 140 2P PS | 4772318404109Code: 03053Radial scroll-housing fan Turbo Classic SI 140 2P PS: 230 V, up to 660 m³/h, Ø140 mm connection, steel housing IP44. For local supply, extraction and cooling.
Price 120.87 € VAT incl.( 99.89 € VAT excl. )Rotary deflector D110 | ball bearings | 300×100 mm | galvanised steel | silverCode: 19428Galvanised steel rotary deflector (wind turbine) D110 with ball bearings. Fits onto a D110 ventilation duct, extracts air without electricity and protects the duct from rain and snow.
Price 79.89 € VAT incl.( 66.02 € VAT excl. )
























