Products catalog

  • Insulated bootlace ferrule | 50mm² | 20mm | crimp | blue | 50 pcs | Sofamel APF-50,00/20 | 245210

    Code: 245210

    Insulated wire end ferrule 50 mm² for flexible wires, 20 mm tube, blue. Sofamel APF-50,00/20, tin-plated copper, PA collar. 50 pcs per pack.

  • Insulated bootlace ferrule | 50mm² | 20mm | crimp | blue | 50 pcs | Sofamel APF-50,00/20 | 245210

    The insulated ferrule terminates a large flexible 50 mm² wire or cable core before it is connected to a power terminal, switch-disconnector or circuit breaker. The strands are crimped in a tin-plated copper tube, so the terminal clamps the full cross-section.

    Key point:
    Without a ferrule, a large flexible core splays in a power terminal, some strands stay unclamped and the contact heats up. The ferrule forms a solid pin, so the terminal clamps the full metal cross-section.
    Cross-section
    50 mm²
    Tube length
    20 mm
    Colour
    blue
    Pack
    50 pcs

    Operating principle

    Strip the insulation to the ferrule tube length (20 mm), twist the strands and insert the wire fully – the wire insulation must enter the insulating collar.

    For this cross-section the ferrule is crimped with a hydraulic or mechanical press using a hexagonal die for 50 mm². The tube and strands are compressed into one solid pin.

    The crimped pin is inserted into the terminal and tightened to the equipment manufacturer's torque – the terminal clamps solid metal, not individual strands.

    Why choose Sofamel APF-50,00/20?
    Tin-plated copper tube and PA collar; the blue colour (Sofamel F) identifies the cross-section at a glance, without measuring.

    Technical specifications

    Product typeInsulated bootlace ferrule (wire end ferrule)
    ManufacturerSofamel (Spain)
    ModelAPF-50,00/20
    Manufacturer code245210
    Wire cross-section50 mm²
    Tube (pin) length20 mm
    Overall length36 mm
    Tube inner Ø10.3 mm
    Collar Ø15 mm
    Collar colourblue (colour code Sofamel F)
    Materialelectrolytic copper, tin-plated; insulating collar – polyamide (PA)
    Pack50 pcs
    CertificateUL

    Key functions

    • Strand compression – the terminal clamps the full cross-section, not individual strands.
    • Tin-plated copper – lower contact resistance and protection against oxidation.
    • Insulating collar – protects the wire entry and eases insertion.
    • Colour code – the cross-section is recognised at once during installation and panel inspection.
    • Exact tube length – 20 mm matches the terminal depth – no bare wire, no protruding pin.

    Where is it used?

    • Incoming and power distribution panels
    • Switch-disconnectors and power circuit breakers
    • Busbar and power terminal connections
    • Frequency inverters and soft starters
    • Power factor correction units
    • Generator, transformer and motor connections

    Use by need

    Power panel builder.
    Reliable entry of large cores into power terminals.
    Industrial electrician.
    Lower risk of a power connection overheating at rated load.
    Generator and substation installer.
    Neatly prepared flexible cable ends.

    Practical use

    If you connect a flexible 50 mm² cable to an incoming switch-disconnector, crimp the ferrule with a press and the correct die – the terminal then clamps the whole core and the joint stays cool at rated load.

    Advantages

    • Strands do not splay or break in the terminal
    • Stable contact even under vibration
    • Tin-plated copper – protection against oxidation
    • Colour coding by cross-section
    • Pack of 50 pcs

    Disadvantages / limitations

    • For flexible wires only – not needed for solid wire
    • Requires a press with a hexagonal die – pliers are not enough
    • Single use – after removal the wire end must be cut off
    • Tube length 20 mm – for a terminal of different depth choose another length

    Safety and installation notes

    • Switch off the voltage and verify it is absent before work.
    • Choose the ferrule exactly to the wire cross-section (50 mm²) – not larger, not smaller.
    • Crimp only with the intended tool and the correct die.
    • Do not use a badly crimped ferrule – cut it off and crimp a new one.
    • Tighten the terminal to the manufacturer's torque and check the wire with a pull test.

    Quick selection guide

    50 mm²
    20 mm
    blue
    50 pcs
    Sofamel APF-50,00/20
    Suitable when you need:
    • to connect a flexible wire to a screw or spring terminal
    • a neat, easily inspected connection
    • reliable contact in vibrating equipment
    Check before use:
    • the wire cross-section (50 mm²)
    • the terminal depth and tube length (20 mm)
    • that you have a press with the correct die
    Important reminder: A ferrule does not replace correct sizing of the wire and the protective device – it ensures a quality wire-end connection.

    FAQ

    Is a ferrule needed for solid wire?
    No – it is intended for flexible (stranded) wires.
    Which wire does this ferrule fit?
    A flexible 50 mm² wire.
    What do I crimp it with?
    A press with a hexagonal die for 50 mm².
    How much insulation should be stripped?
    As long as the tube – 20 mm.
    What does the colour mean?
    The colour indicates the cross-section according to the Sofamel F colour code.
    Can the ferrule be reused?
    No – after removal the wire end must be cut off and a new ferrule crimped.

    Insulated bootlace ferrule | 50mm² | 20mm | crimp | blue | 50 pcs | Sofamel APF-50,00/20 | 245210

    Insulated bootlace ferrule 50 mm², 20 mm tube, blue, 50 pcs – Sofamel APF-50,00/20. Reliable termination of flexible wires for panels, automation and equipment.

    Published: 2026-11-12 · Data verified against the manufacturer datasheet: 2026-11-12

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

    Flexible copper cable H03VV-F | 3G0.5 mm² | 300/300 V | round | black | 1 m | Lietkabelis
    Code: 91530502

    H03VV-F 3G0.5 mm² – AB Lietkabelis flexible round copper cable with class 5 conductors, PVC insulation and a black PVC sheath, 300/300 V. Sold by the metre.

    Cores: L, N, PE. Indicative current ≈ 3 A – for light appliances indoors.

    Price 0.41 € VAT incl.
    ( 0.34 € VAT excl. )
    Terminal clamp | electrical wire connector | universal | 2x0.2-4mm² | for all wire types | WAGO | 221-412 | 4050821808435
    Code: WAGO 221-412

    The WAGO 221-412 connector is one of the most popular and reliable electrical wire connection solutions in the world. It is designed for fast, safe, and professional connection of various types of copper conductors without the need for additional tools.

    Thanks to the patented CAGE CLAMP® technology and convenient orange levers, this connector allows quick connection of solid, stranded, and flexible conductors. The transparent housing enables visual inspection of the connection quality, while its compact dimensions allow easy installation in junction boxes, distribution boards, luminaires, and various automation equipment.

    The WAGO 221 series is widely used in residential, commercial, and industrial applications where reliable, standards-compliant, and long-lasting wire connections are required. 

    Price 0.30 € VAT incl.
    ( 0.25 € VAT excl. )
    Flexible copper cable H03VV-F | 2×0.5 mm² | 300/300 V | round | black | 1 m | Lietkabelis
    Code: 91525002

    H03VV-F 2×0.5 mm² – AB Lietkabelis flexible round copper cable with class 5 conductors, PVC insulation and a black PVC sheath, 300/300 V. Sold by the metre.

    Cores: L and N, no PE. Indicative current ≈ 3 A – for light appliances indoors.

    Price 0.30 € VAT incl.
    ( 0.25 € VAT excl. )
    Terminal block | electrical wire connector | universal | 3x0.2-4mm² | for all types of wires | WAGO | 221-413 | 4050821808442
    Code: WAGO 221-413

    Universal 3-wire terminal block, designed for fast, safe and neat connection of electrical wires. This connector is suitable for solid, stranded and flexible wires, therefore it is widely used both in household electrical installations and in professional installation work.

    The convenient lever system allows the wire to be connected very quickly: lift the lever, insert the conductor and lock it by lowering the lever. The connector has a transparent housing, making it easier to visually check whether the wire has been inserted correctly. 

    Price 0.33 € VAT incl.
    ( 0.27 € VAT excl. )
  • privacy policy

    Information