Insulated Cable | Wire Stripping Knife | 1000V | 220x50x26mm | ParkSide

The knife construction and insulated two-component handle are designed for professional electrical installation work. IEC 60900 applies to insulated hand tools used for work on or near electrical equipment, making this knife suitable for electricians, installers and maintenance specialists.

The insulated tool must only be used for its intended purpose and in accordance with applicable electrical work safety procedures. Before use, the condition of the handle insulation and blade must be checked. An insulated tool with damaged, cracked or heavily worn insulation must not be used.

The two-component handle is designed to provide greater comfort and a more stable grip during work. Its ergonomic shape helps provide more precise control of blade movement when cutting or removing the outer cable sheath.

• Insulated up to 1000V – designed for professional electrical installation work.
• IEC 60900 – a standard applicable to insulated hand tools for electrical work.
• Fixed trapezoidal blade designed for precise cutting of cable insulation.
• Two-component handle provides a more comfortable and stable grip.
• Removable protective sheath protects the blade during transport and storage.
• Hanging hole allows convenient storage of the tool at the workplace.
• Straight construction is suitable for standard cable preparation and insulation stripping work.

• Fixed blade: the blade does not retract into the handle, therefore the protective sheath must be fitted whenever the knife is not in use.
• Work experience required: cutting too deeply into the cable may damage the insulation of the internal conductors.
• Not an automatic wire stripper: the cutting depth and direction are controlled manually by the user.
• Damaged insulation reduces safety: the condition of the handle and insulating surfaces must be visually inspected before each use.
• Sharp blade: improper use of the tool may result in cuts.

When installing an electrical panel, a power cable needs to be prepared for connection to the incoming terminals. The required length of the outer cable sheath is removed. Using the insulated cable knife, the outer insulation layer is carefully cut and removed while taking care not to damage the insulation of the internal conductors. After completing the work, the blade is covered with the supplied synthetic protective sheath.

The knife is designed for cutting and stripping cable insulation and preparing cables for electrical installation work.

Yes. The tool is insulated according to IEC 60900 and is intended for work up to 1000V, provided that all applicable electrical safety procedures are followed.

The knife has a straight, fixed trapezoidal cutting blade.

Yes. A removable synthetic blade protective sheath is included.

It has a two-component handle designed for a more comfortable and stable grip during work.

Yes. The tool has a hanging hole for convenient storage at the workplace.

No. If the insulated handle is cut, cracked, heavily worn or otherwise damaged, the tool must not be used for electrical work.

Before each use, check the condition of the blade, handle and insulating surfaces. Use the knife only for its intended purpose and in accordance with electrical work safety rules. The IEC 60900 and 1000V markings do not replace safe working procedures, proper qualifications or appropriate personal protective equipment. When cutting the cable sheath, the cutting depth must be controlled to avoid damaging internal conductors or their insulation. After use, the blade must be covered with the protective sheath.