
Insulating gel for electrical contacts | boxes | 2-component | 300ml | IP68
Code: Ray gel 300mlPrice 15.25 € VAT incl.( 12.60 € VAT excl. )High-quality two-component insulating gel (liquid rubber) designed for sealing and long-term protection of electrical contacts, connectors, and distribution boxes, even under the most demanding environmental conditions. The gel protects against water, dust, corrosion, UV radiation, and other aggressive factors. It solidifies within minutes, forming an elastic yet tight and electrically insulating layer. Suitable for both indoor and outdoor installations, even under direct exposure to water or moisture.
-
Technical specifications:
Type: Two-component liquid insulating rubber/gel
Capacity: 300 ml
Curing time: ~3 min (at +30 °C)
Dielectric strength: > 23 kV/mm
Insulation resistance: > 1.5 × 10¹⁵ Ω·cm
Operating temperature: from -60 °C to +180 °C
Thermal conductivity: < 0.2 W/m·K
Dielectric constant: < 7
Protection class: IP68 (long-term immersion), IP69 (high-pressure jet protection)
Environmental resistance: UV rays, moisture, dust, chemical vaporsFunctions:
Electrical insulation: safely insulates contacts from the environment
Water protection: maintains IP68/IP69 protection level
Sealing: fills the entire volume and prevents moisture ingress
Corrosion protection: ideal for outdoor connections
UV resistance: does not degrade from sun exposureUsage:
Electrical distribution boxes (especially outdoor use)
LED lighting cable joints and connections
Telephone, data, signal, and sensor lines
Sealing solar power plant connections
Underground installations
Industrial automation connections in aggressive environments
Areas exposed to wind, moisture, and dust (e.g., agriculture, transport, construction)
Pros:
Extremely high protection – IP68/IP69
Fast curing – saves time during installation
UV and high/low temperature resistant
Remains elastic after curing – protects against vibrations
Suitable even for extreme conditions (-60 °C / +180 °C)
Compatible with all cable types and enclosures
Cons:
Limited working time after mixing – must be used quickly
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Terminal clamp | electrical wire connector | universal | 2x0.2-4mm² | for all wire types | WAGO | 221-412 | 4050821808435Code: WAGO 221-412The WAGO 221-412 connector is one of the most popular and reliable electrical wire connection solutions in the world. It is designed for fast, safe, and professional connection of various types of copper conductors without the need for additional tools.
Thanks to the patented CAGE CLAMP® technology and convenient orange levers, this connector allows quick connection of solid, stranded, and flexible conductors. The transparent housing enables visual inspection of the connection quality, while its compact dimensions allow easy installation in junction boxes, distribution boards, luminaires, and various automation equipment.
The WAGO 221 series is widely used in residential, commercial, and industrial applications where reliable, standards-compliant, and long-lasting wire connections are required.
Price 0.30 € VAT incl.( 0.25 € VAT excl. )Terminal block | electrical wire connector | universal | 3x0.2-4mm² | for all types of wires | WAGO | 221-413 | 4050821808442Code: WAGO 221-413Universal 3-wire terminal block, designed for fast, safe and neat connection of electrical wires. This connector is suitable for solid, stranded and flexible wires, therefore it is widely used both in household electrical installations and in professional installation work.
The convenient lever system allows the wire to be connected very quickly: lift the lever, insert the conductor and lock it by lowering the lever. The connector has a transparent housing, making it easier to visually check whether the wire has been inserted correctly.
Price 0.33 € VAT incl.( 0.27 € VAT excl. )Wire connector | universal electrical terminal | 5x0.2–4mm² | for all conductor types | WAGO | 221-415 | 4055143234658Code: WAGO 221-415WAGO 221-415 is a universal 5-conductor wire connector designed for fast and reliable connection of different conductor types. It is suitable for 0.2–4 mm² conductors, including solid, stranded and flexible wires. The transparent housing and lever design make wire insertion, inspection and reconnection easy.
Price 0.57 € VAT incl.( 0.47 € VAT excl. )









