Products catalog

  • IP network audio terminal with integrated amplifier and MP3 player | with PoE power supply | 2x15W | remote control via IR remote

    Code: POE6310

    IP network audio terminal designed for public address (PA), background music, emergency announcements, and alarm systems. The device is powered via PoE, making installation extremely simple – a single network cable is sufficient for both data transmission and power supply.

    Thanks to the integrated MP3 player, 2×15 W digital amplifier, AUX and microphone inputs, this terminal is suitable for both everyday users and engineers or electricians installing professional IP audio systems. 

  • Technical Specifications

    AUX IN
    Input sensitivity: 800 mV
    Frequency response: 26 Hz – 20 kHz
    Distortion: ≤0.5%
    Signal-to-noise ratio (SNR): ≥75 dB

    AUX OUT
    Nominal output voltage: 1000 mV
    Frequency response: 25 Hz – 20 kHz (±3 dB)
    Distortion: ≤0.3%
    SNR: ≥75 dB

    MIC IN
    Input sensitivity: 5 mV
    Frequency response: 30 Hz – 16 kHz (±3 dB)
    Distortion: ≤0.5%
    SNR: ≥65 dB

    USB / SD / NET / MP3
    Frequency response: 25 Hz – 18 kHz (±3 dB)
    Distortion: ≤0.5%
    SNR: ≥70 dB
    Supported SD card: up to 32 GB
    Supported USB drive: up to 32 GB

    Audio Amplifier
    Built-in digital amplifier: 2 × 15 W
    Low power consumption

    Power Supply
    PoE: 48 V, AT mode
    Complies with IEEE 802.3af / 802.3at standards
    Rated power: 15 W

    Additional Features
    Digital display (operating status information)
    Infrared remote control support

    Dimensions and Weight
    Device dimensions: 132 × 140 × 50 mm
    Net weight: 0.6 kg
    Gross weight: 2.0 kg

    Functions

    IP network audio transmission – background music, announcements, and alarm signals via a centralized system
    Built-in MP3 player – local audio playback without a server
    2×15 W amplifier – direct speaker connection
    PoE power supply – single cable, fast installation
    Local volume and playback control
    Digital display – clear device status
    IR remote control
    EMC and short-circuit outputs – integration with alarm or control systems

    Applications

    Home users: Background music in homes, offices, cafés; easy operation without complex configuration; clean installation without additional power supplies
    Engineers / system integrators: IP public address (PA) systems, zoned audio control, easy integration into existing Ethernet infrastructure
    Electricians / installers: PoE for fast and clean installation; compact size for wall, cabinet, or niche mounting; minimal additional components

    Advantages

    PoE power supply – no separate 230 V source required
    Integrated amplifier and MP3 player
    Compact and lightweight
    Clear digital display
    Wide application in IP audio systems
    Low power consumption

    Limitations

    Not suitable for very high-power speakers
    Requires PoE infrastructure
    No wireless connectivity (Wi-Fi / Bluetooth) 

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

  • Subscribtion to new arrivals

    privacy policy

    Information