Products catalog

  • Solar cable entry box | sealed | 113×93×43 mm | white | IP67 | adhesive mount | ES-SBH-W2

    Code: ES-SBH-W2

    Cable entry (junction) box for solar systems – a reliable, hermetic, and aesthetically pleasing solution for safe cable routing through roofs or surfaces. Designed for caravans (RVs), vehicles, yachts, boats, motorhomes, as well as flat concrete roofs and photovoltaic systems. Thanks to the IP67 protection rating and UV-resistant ABS plastic, the box ensures long-term protection against water, dust, moisture, and environmental exposure. 

  • Solar cable entry box | sealed | 113×93×43 mm | white | IP67 | adhesive mount | ES-SBH-W2

    A sealed ABS enclosure for routing solar module cables through a roof or deck – in campervans, vans, yachts and small buildings. It is fixed with adhesive, so there is no need to drill the roof for screws. Colour – white.

    Key point:
    Routing a cable through the roof is the most common leak point in mobile solar systems. The box covers the hole the cables pass through and seals it to IP67, while the adhesive base avoids extra screw holes. The white colour matches white campervan and yacht roofs.
    Dimensions
    113 × 93 × 43 mm
    Protection
    IP67
    Material
    UV-resistant ABS
    Mounting
    Adhesive, no drilling

    How it works

    One hole for the cables is drilled in the roof. The base of the box is bonded to a cleaned and degreased surface so that the hole stays under the box.

    The solar module cables are routed through the sealing entries of the box and the hole inside, and the entries are tightened on the cables.

    The result is a neat, sealed cable passage where water, snow and dust do not get inside.

    Why choose ES-SBH-W2?
    Lets you route solar cables through a campervan or boat roof without several extra holes or separate cable glands.

    Technical specifications

    Product type Cable entry / junction box for solar systems
    Product code ES-SBH-W2
    External dimensions 113 × 93 × 43 mm
    Degree of protection IP67
    Material ABS plastic, UV resistant
    Colour White
    Mounting Adhesive (no drilling for screws)
    Resistance UV, moisture, temperature changes, corrosion

    Main features

    • IP67 sealing – protects the cable hole from rain, snow, spray and dust.
    • Adhesive base – no extra screw holes in the roof or deck.
    • UV-resistant ABS – does not deform or degrade in sunlight.
    • Compact housing – 113 × 93 × 43 mm – fits smaller roofs too.
    • Corrosion resistance – suitable for marine and damp environments.

    Where is it used?

    • Campervans and motorhomes
    • Vans with solar modules
    • Yachts and boats
    • Garden houses and gazebos
    • Trailers and mobile homes
    • Small outbuildings

    Use by need

    For campervan or boat owners.
    A sealed cable passage without complex installation or extra holes.
    For installers.
    A quick, standard solution for mobile solar systems.
    For marine users.
    A housing resistant to corrosion and salt for deck use.

    Practical example

    If you mount a solar module on a campervan roof, drill one hole for the cables, clean and degrease the surface, bond the ES-SBH-W2 box over the hole, route the cables and tighten the entries. Let the adhesive cure according to the adhesive manufacturer before driving.

    Pros

    • IP67 sealing
    • No drilling for screws
    • UV-resistant ABS
    • Compact housing
    • Suitable for marine environments
    • Two colours – white and black

    Cons / limitations

    • Bonding requires a clean, degreased surface
    • Adhesive may not be included – check before installation
    • Not suitable for large-diameter cable bundles
    • Intended for cable routing, not for mounting electrical components

    Safety and installation notes

    • Disconnect or cover the module before routing cables – a module generates voltage in daylight.
    • Deburr the hole edges so they do not damage cable insulation.
    • Choose adhesive according to the roof material (fibreglass, steel, aluminium).
    • Do not overtighten the entries – this damages the cable sheath.
    • Check sealing after installation before the first rain or wash.

    Quick selection guide

    113×93×43 mm
    IP67
    UV-resistant ABS
    Adhesive mount
    Campervans, yachts
    white
    Suitable when you need:
    • routing cables through a campervan or boat roof
    • installation without extra screw holes
    • a sealed solution in damp environments
    Check before use:
    • number and diameter of cables
    • roof material and suitable adhesive
    • space – whether the box fits between roof elements
    Important reminder: the box protects the cable passage but does not replace protective devices – a DC fuse or isolator is installed according to the system diagram.

    FAQ

    Do I need to drill?
    Only one hole for the cables – the box is fixed with adhesive.
    What is the protection rating?
    IP67.
    Is it suitable for yachts?
    Yes, the housing is UV and corrosion resistant.
    What are the dimensions?
    113 × 93 × 43 mm.
    What colour is it?
    White; a black (ES-SBH-B2) version is also available.
    Is it suitable for thick cables?
    It is intended for solar module cables; not for large-diameter bundles.

    Solar cable entry box | sealed | 113×93×43 mm | white | IP67 | adhesive mount | ES-SBH-W2

    ES-SBH-W2 – sealed white 113×93×43 mm cable entry box for solar modules, IP67, UV-resistant ABS, adhesive mounting. For sealed cable routing through campervan, van and yacht roofs.

    Published: 2026-11-17 · Data verified against supplier specification: 2026-11-17

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • Alternative products

  • privacy policy

    Information