Laboratory PP sink | resistant to chemicals | 55×45 cm | seamless construction | with siphon | grey
Code: ES-STRONGPrice 84.80 € VAT incl.( 70.08 € VAT excl. )One-piece polypropylene laboratory sink 55×45 cm, resistant to acids, alkalis and salt solutions. Supplied with PP trap, plug and overflow cap. For laboratories, school chemistry rooms, medical facilities and workshops.
-
Laboratory PP sink | resistant to chemicals | 55×45 cm | seamless construction | with siphon | grey
A one-piece polypropylene (PP) sink for laboratory benches. Made for places where acids, alkalis and other chemicals go down the drain – the kind of use that strips ceramic glaze and corrodes stainless steel.
Key point:
In a laboratory, the sink is part of chemical safety, not just furniture. A seamless PP body has no joints where chemicals can seep in or collect, and the included PP trap keeps the entire drain path chemically resistant up to the pipework.Material
PP (polypropylene)Dimensions
55 × 45 cmConstruction
One-piece, seamlessIncluded
PP trap, plug, overflow capHow it works
The sink is set into a cut-out in a laboratory or work countertop. The included PP trap is fitted underneath and connected to the drain pipe.
Polypropylene is chemically inert to most inorganic acids, alkalis and salt solutions, so the surface does not etch or change structure. The smooth, non-porous surface rinses clean and does not collect dirt or deposits.
The result is a sealed, durable and easy-to-maintain washing point that does not need frequent replacement due to corrosion or damaged coating.
Why choose this sink?
You get a complete chemically resistant washing unit in one purchase: sink, trap, plug and overflow cap. The light body (2.3 kg) installs easily without special fixings or lifting equipment.Technical specifications
Product type Laboratory sink Code ES-STRONG Material PP (polypropylene), chemical-resistant Construction One-piece (seamless) External dimensions 55 × 45 cm Colour Grey Weight 2.3 kg Installation Into countertop (laboratory, work furniture) Included Sink, PP trap, plug, PP overflow cap Other colours White (ES-STRONW), black (ES-STRONB) Key features
- Chemical resistance – acids, alkalis and cleaners do not etch the surface
- One-piece body – no seams or joints, lower leak risk
- Non-porous surface – easy to rinse, no build-up of dirt or deposits
- PP trap included – the whole drain path is chemically resistant
- Plug and overflow cap – lets you soak glassware or tools
- 2.3 kg weight – easy for one person to transport and install
Where is it used?
- Chemical, microbiological and quality control laboratories
- School and university chemistry classrooms
- Preparation rooms in medical and veterinary facilities
- Electroplating, battery and electronics repair workshops
- Food and beverage production laboratories
- Water treatment and wastewater plant laboratories
- Paint and chemical preparation areas
Use by need
For laboratory managers.
A chemically resistant washing unit that fits easily into an existing lab bench.For furniture makers and installers.
A one-piece sink with trap – one kit for a laboratory bench project.For production workshops.
A washing point for glassware, parts and tools where electrolytes, etchants or cleaners are used.Practical example
If the ceramic sinks in a school chemistry classroom have crumbled from acids after a few years, they can be replaced with PP sinks: set the sink into the existing or a newly cut opening, connect the included PP trap – and the washing point is resistant to everyday laboratory solutions again.Pros
- Resistant to most acids, alkalis and salt solutions
- One-piece construction without seams
- Easy-to-clean, non-porous surface
- Trap, plug and overflow cap included
- Lightweight – 2.3 kg
- Three colours: white, grey, black
Cons / limitations
- PP is not intended for continuous flow of hot water or hot media
- Some organic solvents and strong oxidisers can damage PP – check compatibility for your specific chemical
- Requires a countertop cut-out
- Tap not included
Safety and installation notes
- Measure the sink and mark the cut-out from the actual product before cutting the countertop
- Seal trap and drain joints only with chemically compatible gaskets and sealants
- Do not pour boiling liquids or hot solutions directly into the sink – PP may deform
- Dilute concentrated acids and alkalis before disposal according to laboratory procedure
- Provide an eyewash station or emergency shower near the sink
- Do not clean the surface with abrasives or wire brushes
Quick selection guide
PP55 × 45 cmOne-pieceWith trapGrey2.3 kgSuitable when you need:- A chemically resistant sink for a laboratory bench
- To replace a chemically damaged ceramic or steel sink
- A complete kit with trap in one purchase
Check before use:- Whether your chemicals are compatible with polypropylene
- Countertop cut-out dimensions against the product
- Drain pipe diameter and connection type
- Whether you have a suitable laboratory tap
Important reminder: The sink does not replace a fume cupboard, a chemical neutralisation system or an emergency eyewash station.FAQ
Is the trap included?
Yes, a PP trap, plug and overflow cap are included.Is the sink acid-resistant?
Yes, polypropylene resists most inorganic acids, alkalis and salt solutions.Can I pour hot water into it?
Warm water is fine, but boiling liquids and hot solutions are not recommended.Is a tap included?
No, a laboratory tap must be purchased separately.Are other colours available?
Yes, this sink is also available in white (ES-STRONW) and black (ES-STRONB).How is it installed?
It is set into a countertop cut-out and connected to the drain via the included PP trap.Laboratory PP sink | resistant to chemicals | 55×45 cm | seamless construction | with siphon | grey
Laboratory PP sink 55×45 cm (ES-STRONG) – a one-piece, chemically resistant polypropylene sink with PP trap, plug and overflow cap for laboratories, schools, medical facilities and workshops.
Published: 2026-04-03 · Data verified against supplier specification: 2026-11-18
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review Alternative products
Laboratory PP sink | chemical-resistant | 55×45 cm | one-piece construction | with siphon | whiteCode: ES-STRONWOne-piece polypropylene laboratory sink 55×45 cm, resistant to acids, alkalis and salt solutions. Supplied with PP trap, plug and overflow cap. For laboratories, school chemistry rooms, medical facilities and workshops.
Price 84.80 € VAT incl.( 70.08 € VAT excl. )Laboratory PP sink | chemical resistant | 55x45 cm | one-piece construction | with siphon | blackCode: ES-STRONBOne-piece polypropylene laboratory sink 55×45 cm, resistant to acids, alkalis and salt solutions. Supplied with PP trap, plug and overflow cap. For laboratories, school chemistry rooms, medical facilities and workshops.
Price 84.80 € VAT incl.( 70.08 € VAT excl. )


















