LED bulb with PIR motion sensor E27 | Optonica SP7-A6 | 7W | 4500K | 560 lm | 360° | white | IP20
Code: SP7-A6-1711Price 16.47 € VAT incl.( 13.61 € VAT excl. )LED E27 bulb with an integrated PIR motion sensor is a practical and energy-efficient solution designed for automatic lighting in spaces where light is only needed when something is moving. The bulb automatically switches on when motion is detected and switches off after a set time, helping to save electrical energy and increase user comfort, 360° light distribution allows even illumination of the entire room without additional luminaires.
-
Technical Specifications
Brand: Optonica
Manufacturer: OptonicaLED
Socket: E27
Power: 7 W
Incandescent lamp equivalent: ~46 W
Luminous flux: 560 lm
Efficiency: 80 lm/W
Color temperature: 4500 K
Light color: Neutral white
Color code: 845
Beam angle: 360°
CRI: ≥80
Switch-on time: 0,1 s
Lifetime: 25 000 h
Switching cycles: 100 000
Luminous flux at end of life: ≥70 %
LED type: SMD
Energy consumption: 7 kWh / 1000 h
Power supply: AC 220–240 V, 50–60 Hz
Dimming: No
Protection class: IP20
Operating temperature: −20 °C … +40 °C
Material: Plastic
Shape: Globe
Sensor: Integrated PIR
Max. detection distance: up to 6 m
Switch-off delay: ~60 sFunctions
Automatic switch-on during motion – the light turns on only when motion is detected.
Automatic switch-off – after ~60 s without motion the lamp switches off.
360° light distribution – uniform lighting throughout the room.
Instant start – no flicker or delay.
Energy saving – light is not used unnecessarily.Usage
For household users: Corridors, staircases, storage rooms, basements, wardrobes, utility rooms, places where lights are often forgotten to be switched off
For electricians: Quick solution without additional motion sensors, installed like a standard E27 lamp, suitable for renovations and simple projects
For business / administrative premises: Common areas, reduction of energy consumption, simple automatic lighting without complex automationPros
Integrated PIR motion sensor
Easy installation – no additional devices required
Neutral white light
Long lifetime
Low energy consumption
360° beam angleCons
Non-dimmable
For indoor use only (IP20)
No possibility to adjust sensor sensitivity or timeIllustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.Lamp baseE27ManufacturerOperating voltage230 V ACColour temperature4500KBulb power7–9 WLamp base typeE27Supply voltage230 V ACLight colourNeutral white (3300–4500 K)The IP protection class indicates the device's resistance to environmental factors.

The first digit indicates protection against dust and solid objects.
The second digit indicates protection against moisture.First digit values:
X — Untested;
0 — No protection;
1 — Protected against solid objects larger than 50 mm;
2 — Protected against solid objects larger than 12.5 mm;
3 — Protected against solid objects larger than 1 mm;
4 — Protected against solid objects larger than 1 mm;
5 — Dust protected;
6 — Totally dustproof.
Second digit values:X — Untested;
0 — No protection;
1 — Protected against vertically falling water drops;
2 — Protected against water drops falling at a 15º angle;
3 — Protected against rain falling at a 60º angle;
4 — Protected against water splashes;
5 — Protected against water jets;
6 — Protected against large amounts of water;
7 — Protected against short-term immersion in water up to 1 meter deep;
8 — Protected against long-term immersion in water up to 3 meters deep.Lumen (lm) – unit of luminous flux: how much light a lamp or luminaire emits in total. Lux (lx) – illuminance: how much of that light falls on 1 m² of surface (1 lx = 1 lm/m²). Watts (W) only show power consumption – compare LED brightness by lumens.
How many lux does a room need?
Corridor, storeroom, basement 100–150 lx Living room, bedroom 100–300 lx Garage, warehouse 100–200 lx Kitchen, bathroom, desk 300–500 lx Office, computer workstation 500 lx Workshop, fine work 500–750 lx How to calculate the lumens you need
Required lumens ≈ illuminance (lx) × area (m²) ÷ 0.5
The 0.5 factor accounts for light absorbed by walls, ceiling and diffusers and for luminaires getting dirty over time. Example: 18 m² garage, 200 lx → 200 × 18 ÷ 0.5 = 7,200 lm. That is about three 150 cm T8 LED tubes of ~2,500 lm each.
This is an estimate. For an exact design (workplaces, production, public areas) use lighting calculation software, e.g. DIALux.
Recommended values are indicative, based on the principles of EN 12464-1 for workplace lighting.
3 main types of white light:
Warm white (2700 - 3000 K)
Neutral white / daylight (4000 - 4500 K)
Cool white (5000 - 6500 K)
How to choose the right light color temperature:2700 - 3000K creates a cozy atmosphere in a room. Used in spas, hotel entrances, living rooms, and bedrooms.
4000 - 4500K is used in commercial, retail, office spaces, garages, medical buildings, as well as bathrooms, kitchens, and workrooms.
5000 - 6500K is suitable for lighting workshops, operating rooms, or other areas where attention to detail is important. Also suitable for outdoor lighting, modern interiors, and their accents.
To calculate how many and what type of light fixtures are needed for your desired space, visit this website: https://www.dialux.com/en-GB/download.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review








