
Low-voltage LED floodlight | 10W | DC 12–36V / AC 15–36V | 4000K | 800lm | IP65 | Bellight
Code: LP1236-10WPrice 18.19 € VAT incl.( 15.03 € VAT excl. )-
Low-voltage LED floodlight | 10W | DC 12–36V / AC 15–36V | 4000K | 800lm | IP65 | Bellight
Bellight 10W is an IP65 LED floodlight powered by low voltage: DC 12–36 V or AC 15–36 V. It delivers 800 lm of neutral white 4000 K light where there is no 230 V mains or where low voltage is used for safety reasons.
Key idea:
The floodlight connects directly to a 12 V or 24 V battery, solar system or low-voltage transformer – no inverter to 230 V is needed. It must not be connected to the 230 V mains.Power
10 WLuminous flux
800 lm (80 lm/W)Supply
DC 12–36 V / AC 15–36 VProtection
IP65Operating principle
The floodlight is fixed with its bracket to a wall, pole, vehicle or structure and connected with two wires to a low-voltage source.
The built-in electronics accept DC 12–36 V or AC 15–36 V, so the same floodlight suits 12 V, 24 V and 36 V systems.
The LED array delivers 800 lm of 4000 K light, and Ra >80 ensures natural-looking colours.
What makes Bellight 10W useful?
One model fits battery, solar and 24 V vehicle systems – no need to look for a separate floodlight for each voltage.Technical specifications
Product type Low-voltage LED floodlight Manufacturer / brand BEL LIGHT GROUP (Poland) / Bellight Product code LP1236-10W EAN 5903089806196 Power 10 W Supply voltage DC 12–36 V / AC 15–36 V Frequency (AC) 50 Hz Luminous flux 800 lm Luminous efficacy 80 lm/W Colour temperature 4000 K (neutral white) Colour rendering index Ra >80 Ingress protection IP65 Housing colour Black Dimensions (H × W × D) 90 × 70 × 21 mm Weight 0.15 kg Service life 25,000 h Manufacturer warranty 2 years Not suitable for Connection to 230 V mains Key features
- Wide voltage range – DC 12–36 V and AC 15–36 V: suits 12 V, 24 V and 36 V systems.
- Direct connection – no inverter to 230 V, fewer losses and components.
- IP65 housing – dust-tight and protected against water jets, suitable outdoors.
- 4000 K neutral white light – comfortable for the eye and for work.
- Ra >80 – natural-looking colours.
- 0.15 kg, 90 × 70 × 21 mm – light and compact, suitable for vehicles and mobile sites.
Where is it used?
- Cottages and cabins with a solar system
- Garages, workshops and stores powered by batteries
- Campers, trailers and work vehicles (12/24 V)
- Boats and jetties
- Construction sites with low-voltage supply
- Damp areas where safe low voltage is used
- Farm buildings without 230 V mains
Use by need
Solar system owner.
Lighting connects directly to the batteries, without inverter losses.Vehicle and machinery owner.
Work light on a 12 V or 24 V on-board supply.Electrician.
Safe low voltage where using 230 V is not advisable.Practical application
If a cottage with a solar system and 12 V batteries needs light for an entrance or terrace, Bellight 10W connects directly to the batteries – without an inverter that consumes energy itself – and 800 lm is enough for the job.Pros
- Wide voltage range: DC 12–36 V / AC 15–36 V
- No inverter to 230 V needed
- IP65 protection
- Ra >80, 4000 K
- Compact and lightweight
- 2-year manufacturer warranty
Cons / limitations
- Not for 230 V mains – it will be damaged
- At 12 V the current is higher (≈0.8 A) – a thicker cable is needed
- No motion sensor
- Beam angle and housing material are not stated in the manufacturer data
Safety and installation notes
- Never connect the floodlight to the 230 V mains.
- Check the wire marking and polarity before connecting.
- Protect the circuit with a fuse rated for the current and cable.
- Size the cable for the current and length to keep voltage drop to a minimum.
- Make outdoor connections in sealed connectors or boxes.
- Disconnect the power source during installation.
Quick selection guide
10 W800 lm4000 KDC 12–36 VAC 15–36 VIP65Suitable when you need:- Lighting without 230 V mains
- Direct connection to a 12 V / 24 V battery or solar system
- A compact floodlight for an entrance, terrace or vehicle
Check before use:- System voltage – DC 12–36 V or AC 15–36 V
- Whether the cable cross-section suits the current (≈0.8 A at 12 V, ≈0.4 A at 24 V)
- Whether the battery capacity is enough for the required run time
- Whether the mounting location suits the dimensions (90 × 70 × 21 mm)
Important reminder: This is a low-voltage floodlight – connecting it to 230 V mains will destroy it. For 230 V mains choose a standard LED floodlight.FAQ
Can it be plugged into a 230 V socket?
No, the floodlight is designed only for DC 12–36 V or AC 15–36 V.Will it work with a 12 V car or camper battery?
Yes, DC 12 V is within the permitted 12–36 V range.Will it work with a 24 V truck or solar system?
Yes, 24 V is also within the DC 12–36 V range.How much light does the 10 W model deliver?
According to the manufacturer – 800 lm, 4000 K.Can it be used outdoors?
Yes, the housing is rated IP65.Can it be powered from a 24 V AC transformer?
Yes, the manufacturer states an AC 15–36 V range, so a 24 V AC transformer is suitable.Low-voltage LED floodlight | 10W | DC 12–36V / AC 15–36V | 4000K | 800lm | IP65 | Bellight
Bellight 10W – low-voltage IP65 LED floodlight (DC 12–36 V / AC 15–36 V, 800 lm, 4000 K) for solar systems, battery installations and 12/24 V vehicle systems.
Published: 2026-11-14 · Data verified against the manufacturer specification: 2026-11-14
Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.This product is marked with the CE label, which confirms that it complies with all applicable European Union directives and regulations. CE marking is not just a formality – it is an important indicator of quality and safety, ensuring that the product has been properly assessed, tested, and can be safely used throughout the EU market.
CE certification means that the product has been evaluated according to the main criteria:
Safety requirements – ensures that the product does not pose a risk to the user or the environment
Electromagnetic compatibility (EMC) – the device does not interfere with other equipment and is resistant to external disturbances
Environmental standards – complies with current ecological and material usage requirements
Operational reliability – the product is suitable for long-term use according to its intended purposeCE marking allows this product to:
be legally supplied and used in all European Union countries
ensure a high level of quality and safety
be used in residential, commercial, and industrial environmentsThe CE mark is a declaration of the manufacturer’s responsibility, confirming that the product complies with all applicable standards and has been assessed according to EU legislation.
What does this mean for you as a buyer?
Safe use in everyday activities
Reliable performance and reduced risk of failure
Compliance with EU standards and requirements
Suitability for professional solutions
Love it? Share your thoughts in a review!Write Review

