Products catalog

  • LED lamp T8 | 16W | 2800K | 2560lm | 150cm | IP20 | with starter | OPTONICA

    Code: TU16-A3-5549
    Barcode: 3800156655492

    T8 LED lamp – a high-quality 1500mm light source designed to replace fluorescent lamps without additional rewiring. The lamp offers high luminous flux (2560 lm), excellent efficiency, and a warm white light spectrum (2800K). It features a built-in single-ended power supply and starter for easy installation in existing fixtures, and an adjustable rotation for precise light direction. Suitable for indoor use where cozy, warm lighting is desired: in homes, hotels, restaurants, or offices.

  • Technical Specifications:

    Manufacturer: OPTONICA

    Type: LED lamp T8

    Length: 150 cm

    Power: 16 W

    Voltage: 175–265 V AC

    Luminous flux: 2560 lm

    Beam angle: 270°

    Light color (CCT): 2800 K (warm white)

    Color rendering index (CRI): Ra > 80

    Protection class: IP20 (for indoor use)

    Power factor (PF): > 0.9

    Power supply: single-ended

    Starter: included (allows replacing fluorescent lamps without rewiring)

    Material: nanoplastic (lightweight, impact-resistant, good light diffusion)

    Adjustable rotation: yes

    Warranty: 5 years

    Features:

    Effectively replaces 36–58 W T8 fluorescent lamp

    Single-ended power supply – safer and easier installation

    270° beam angle – excellent wide-area illumination

    Included starter allows use in existing fixtures

    Extremely durable – up to 30,000–50,000 hours

    Adjustable rotation – convenient light direction adjustment

    Usage:

    Residential lighting (kitchens, corridors, bathrooms, garages)

    Commercial spaces (shops, offices, warehouses)

    Hotels, restaurants, cafes

    Educational institutions, libraries

    Pros:

    Extremely bright and efficient – 2560 lm with only 16 W power

    Energy-saving and environmentally friendly (mercury-free)

    Warm white light with good color rendering (Ra>80)

    Suitable for direct replacement of fluorescent T8 lamps

    With starter – no need to change ballast (plug & play)

    Adjustable rotation – more flexible installation

    5-year warranty

    Cons:

    Not suitable for outdoor use without additional protection (IP20 – indoor use only)

    Non-dimmable (no dimmer function) 

    How it is connected

    • With an electromagnetic choke: the old starter is replaced with the LED starter supplied – no rewiring needed.
    • Or directly on 230 V mains: the choke and starter are removed, supply (L and N) is connected at one end of the tube.
    • Not for use with an electronic ballast.

    Important before installation

    • Switch off the luminaire supply and check that no voltage is present before replacing the tube.
    • Rewiring a luminaire for direct 230 V supply must be done by a qualified electrician. Label the converted luminaire as fitted with an LED tube.
    • A fluorescent lamp refitted into a converted luminaire will not work.
    • All LED T8 tubes →

    Published: 2026-11-11 · Data verified against the supplier specification: 2026-11-11

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • privacy policy

    Information