Products catalog

  • LED outdoor area floodlight | 100W | 230V | 4000K | 13000lm | 70°×140° | IP65 | MADOR | 012598

    Code: MADOR-100-4000
    Barcode: 5902216796966
  • LED outdoor area floodlight | 100W | 230V | 4000K | 13000lm | 70°×140° | IP65 | MADOR | 012598

    MADOR 100W is an IP65 aluminium LED floodlight delivering 13,000 lm (130 lm/W) of 4000 K neutral white light. The 70°×140° optic spreads light widely in the horizontal plane, making it suitable for evenly lighting yards, car parks and warehouse access areas.

    Key idea:
    High efficacy (130 lm/W) means the same area is lit with less power than with older LED or halogen floodlights. A versatile mid-power solution for company premises and parking areas.
    Power
    100 W
    Luminous flux
    13,000 lm (130 lm/W)
    Beam angle
    70°×140°
    Protection
    IP65, aluminium

    Operating principle

    The floodlight is fixed with its bracket to a wall, pole or structure and connected directly to the 230 V AC mains – the driver is built in.

    SMD3030 LEDs and the optic form a 70°×140° wide light distribution, while the aluminium housing dissipates heat – ensuring a stable luminous flux and the manufacturer-stated 50,000 h service life.

    A power factor of ≥0.95 means a low reactive load on the grid, which matters when many luminaires share one circuit.

    What makes MADOR 100W useful?
    13,000 lm from 100 W, 70°×140° distribution and an IP65 housing – one floodlight for long-term, maintenance-free outdoor use.

    Technical specifications

    Product type LED outdoor area floodlight
    Manufacturer / series PHU BOWI (Poland) / MADOR
    Manufacturer index 012598
    Product code MADOR-100-4000
    EAN 5902216796966
    Power 100 W
    Supply voltage 230 V AC, 50 Hz
    Luminous flux 13,000 lm
    Luminous efficacy 130 lm/W
    Colour temperature 4000 K (neutral white)
    Colour rendering index (CRI) ≥80
    Power factor (PF) ≥0.95
    Beam angle 70°×140°
    LEDs SMD3030
    Ingress protection IP65
    Housing Aluminium, grey
    Dimensions 350 × 155 × 75 mm
    Operating conditions −25…+60 °C, relative humidity <85 %
    Service life 50,000 h
    Driver Built-in, connects directly to 230 V

    Key features

    • 130 lm/W efficacy – more light per watt, lower electricity costs.
    • 70°×140° wide optic – one floodlight covers a wider strip, with fewer dark zones between luminaires.
    • IP65 aluminium housing – dust-tight, protected against water jets, good heat dissipation.
    • CRI ≥80 – natural-looking colours, objects and people are easier to recognise.
    • PF ≥0.95 – low reactive load, suitable for group connection.
    • 4000 K neutral white light – comfortable for the eye, suits residential and commercial settings.

    Where is it used?

    • Company premises and yards
    • Warehouse and logistics centre access areas
    • Car parks
    • Construction sites and material yards
    • Farm yards and agricultural sites
    • Fuel station and service areas

    Use by need

    Facility manager.
    One floodlight replaces several smaller ones – fewer points to maintain.
    Electrical contractor.
    Verified manufacturer data (lm, PF, IP) speeds up project coordination.
    Agriculture and construction.
    The IP65 housing suits dusty and damp outdoor conditions.

    Practical application

    If a company yard or car park is still lit by several old halogen floodlights, they can be replaced with MADOR 100W – 13,000 lm and a 70°×140° distribution cover a wide area while electricity consumption drops several times.

    Pros

    • 130 lm/W – high luminous efficacy
    • Verified manufacturer data: flux, CRI, PF, operating temperature
    • IP65 aluminium housing
    • Wide 70°×140° distribution – fewer luminaires per area
    • Built-in driver, PF ≥0.95
    • Manufacturer-stated 50,000 h service life

    Cons / limitations

    • No motion sensor – control requires a photocell, timer or sensor
    • Dimming is not stated in the manufacturer data
    • Less suitable than a directional optic for accenting a narrow zone or tall object
    • Fixed colour temperature – cannot be changed

    Safety and installation notes

    • Disconnect the power supply before installation and verify the line is dead.
    • Make outdoor connections in a sealed junction box (IP65 or higher).
    • Protect the circuit with a circuit breaker; an RCD is recommended for outdoor circuits.
    • Earth the housing – connect the PE conductor.
    • Aim the floodlight so that it does not dazzle drivers or neighbours; adjust the tilt.
    • Work on 230 V installations must be carried out by a qualified electrician.

    Quick selection guide

    100 W
    13,000 lm
    4000 K
    70°×140°
    IP65
    230 V
    Suitable when you need:
    • Even lighting of a wide area from one point
    • A mid-power floodlight for company premises
    • A reliable IP65 floodlight with verified data
    Check before use:
    • Whether the support and bracket suit the floodlight dimensions (350 × 155 × 75 mm)
    • Whether control is needed – photocell, timer or motion sensor
    • Whether the beam angle matches the area to be lit
    • Whether circuit protection and cable cross-section match the total load
    Important reminder: The floodlight is not intended for emergency lighting and has no motion sensor – use a photocell or sensor for automatic control.

    FAQ

    Is a separate driver needed?
    No, the driver is built in – the floodlight connects directly to 230 V AC.
    How much light does MADOR 100W deliver?
    According to the manufacturer – 13,000 lm, i.e. 130 lm/W.
    What is the difference between the 90° and 70°×140° versions?
    The 90° optic focuses light on the target, while the 70°×140° optic spreads it in a wide horizontal strip for larger areas.
    Can it be used outdoors in the rain?
    Yes, the IP65 housing is dust-tight and protected against water jets; operating temperature −25…+60 °C.
    Can it be used with a motion sensor or photocell?
    Yes, the 230 V supply can be switched by an external sensor or photocell rated for the floodlight power.
    Which colour temperature to choose – 4000 K or 5500 K?
    4000 K is a more comfortable neutral light for residential and commercial settings; 5500 K is a cooler, higher-contrast light for work and industrial areas.

    LED outdoor area floodlight | 100W | 230V | 4000K | 13000lm | 70°×140° | IP65 | MADOR | 012598

    MADOR 100W 4000 K – 13,000 lm, 130 lm/W, 70°×140°, IP65 aluminium LED floodlight with built-in driver for company premises and parking areas.

    Published: 2026-11-14 · Data verified against the manufacturer datasheet: 2026-11-14

    Illustrative image may have been created using AI. The appearance of the product may differ slightly from the image shown. Please refer to the technical specification.
  • privacy policy

    Information